Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. Kersevan et al., “Overview of an 80 K Liner Design for Synchrotron Light Interception in SSCL Collider”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3888-3891.
[n] Z. Kukuma, R. Schwartz, and S. Sithole, “Observation planning tool for the MeerKAT radio telescope”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1860-1863. doi:10.18429/JACoW-ICALEPCS2025-THPD107
[n] N. Delerue et al., “Study of the Performances of a 3D Printed BPM”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3656-3659. doi:10.18429/JACoW-IPAC2018-THPAL016
[n] K. Y. Ng and A. Bogacz, “Low-Dispersion γt Jump for the Main Injector”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAR17, pp. 3388-3390.
[n] O. G. Grimm et al., “Longitudinal Bunch Shape Diagnostics with Coherent Radiation and a Transverse Deflecting Cavity at TTF2”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUPOS07, pp. XX-XX.
[n] J.-L. Pellegrin and H. Schwarz, “Control Electronics of the PEP RF System”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2320-2323.
[n] P. Sievers, R. Bellone, D. Fiander, J. Hangst, and G. Silvestrov, “Performance and Operational Experience with CERN-Lithium Lenses”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1401-1404.
[n] K. Cassou et al., “PALLAS, a laser-plasma injector test facility, development status”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPM124, unpublished.
[n] W. F. Bergan, “Plasma Simulations for an MBEC Cooler for the EIC”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1823-1826. doi:10.18429/JACoW-IPAC2021-TUPAB180
[n] P. Lebrun, “Collaborating with Industry: Lessons from the LHC Megaproject”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEIM02, pp. 1963-1963.
[n] E. L. Wright, C. Pearson, T. G. Lee, W. R. Fowkes, and G. Caryotakis, “PEP-II Prototype Klystron”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1259-1262.
[n] T. Whitlatch et al., “Shipping and Alignment for the SNS Cryomodule”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH119, pp. 1488-1490.
[n] D. Fiander, “Hardware for a Full Aperture Kicker System for the CPS”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 1022-1024.
[n] J. Serrano, P. Alvarez, D. Autiero, and J. Lewis, “Inter-laboratory Synchronization for the CNGS Project”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH125, pp. 3092-3094.
[n] D. Reagan, “A Device to Measure Quadrupole Gradient-Length Product”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4058-4061.
[n] T. Zwart et al., “A Spin Control System for the South Hall Ring at the Bates Linear Accelerator Center”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAA31, pp. 600-602.
[n] J. Serrano, I. Acebes, S. Deghaye, W. Heinze, and J. Lewis, “VME Switch for CERN's PS Analog Video System”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP534, pp. XX-XX.
[n] C. R. Haskins, “EPICS and Open Source Data Analytics Platforms”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1420-1422. doi:10.18429/JACoW-ICALEPCS2017-THPHA032
[n] J. H. P. Rogers, C. D. Beard, and P. A. Corlett, “High Power Coupler Studies for the ERLP”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPT067, pp. 3736-3738.
For LaTeX
Use Complete Form
For BibTeX
References
- R. Kersevan et al., “Overview of an 80 K Liner Design for Synchrotron Light Interception in SSCL Collider”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3888-3891.
- Z. Kukuma, R. Schwartz, and S. Sithole, “Observation planning tool for the MeerKAT radio telescope”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 1860-1863.
- N. Delerue et al., “Study of the Performances of a 3D Printed BPM”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3656-3659.
- K. Y. Ng and A. Bogacz, “Low-Dispersion γt Jump for the Main Injector”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAR17, pp. 3388-3390.
- O. G. Grimm et al., “Longitudinal Bunch Shape Diagnostics with Coherent Radiation and a Transverse Deflecting Cavity at TTF2”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper TUPOS07, pp. XX-XX.
- J.-L. Pellegrin and H. Schwarz, “Control Electronics of the PEP RF System”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2320-2323.
- P. Sievers, R. Bellone, D. Fiander, J. Hangst, and G. Silvestrov, “Performance and Operational Experience with CERN-Lithium Lenses”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1401-1404.
- K. Cassou et al., “PALLAS, a laser-plasma injector test facility, development status”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM124, unpublished.
- W. F. Bergan, “Plasma Simulations for an MBEC Cooler for the EIC”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1823-1826.
- P. Lebrun, “Collaborating with Industry: Lessons from the LHC Megaproject”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEIM02, pp. 1963-1963.
- E. L. Wright, C. Pearson, T. G. Lee, W. R. Fowkes, and G. Caryotakis, “PEP-II Prototype Klystron”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1259-1262.
- T. Whitlatch et al., “Shipping and Alignment for the SNS Cryomodule”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH119, pp. 1488-1490.
- D. Fiander, “Hardware for a Full Aperture Kicker System for the CPS”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 1022-1024.
- J. Serrano, P. Alvarez, D. Autiero, and J. Lewis, “Inter-laboratory Synchronization for the CNGS Project”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH125, pp. 3092-3094.
- D. Reagan, “A Device to Measure Quadrupole Gradient-Length Product”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4058-4061.
- T. Zwart et al., “A Spin Control System for the South Hall Ring at the Bates Linear Accelerator Center”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAA31, pp. 600-602.
- J. Serrano, I. Acebes, S. Deghaye, W. Heinze, and J. Lewis, “VME Switch for CERN's PS Analog Video System”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP534, pp. XX-XX.
- C. R. Haskins, “EPICS and Open Source Data Analytics Platforms”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1420-1422.
- J. H. P. Rogers, C. D. Beard, and P. A. Corlett, “High Power Coupler Studies for the ERLP”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPT067, pp. 3736-3738.
Back to search