Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Guyot, M. O. Ounsy, and S. Pierre-Joseph Zephir, “Status of the TANGO Archiving System”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper RPPA27, pp. 570-572.
[n] A. Aleksandrov, S. Assadi, W. Blokland, C. Deibele, W. Grice, and J. Pogge, “Beam in Gap Measurements at the SNS Front-End”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG041, pp. 1524-1526.
[n] W. M. Fawley et al., “Time-dependent Degradation of an Ion-Focused ATA Beam”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1489-1492.
[n] E. V. Kaportsev et al., “Modernization of the Automated Control System in the Kurchatov Synchrotron Radiation Source”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEPPD052, pp. 659-661.
[n] L. M. Sevryukova et al., “Superconducting RF Activities at Federate Problem Lab for Technology and Study of the SC Cavities of the Ministry of the Russian Federation for Atomic Energy at the Institute for High Energy Physics”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PT004, pp. XX-XX.
[n] M. Farkhondeh, S. P. Holmberg, W. W. Sapp, and J. D. Zumbro, “Fiducialization of Magnets for the MIT-Bates SHR”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 634-637.
[n] A. Zholents, M. Zolotorev, and W. Wan, “Design and Analysis of a Cooling Insertion Lattice for Optical Stochastic Cooling”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4V030, pp. 1801-1803.
[n] W. Meyer et al., “Generation of High Power 140 GHz Microwaves with an FEL for the MTX Experiment”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1551-1554.
[n] N. I. Azorsky et al., “Experimental Study of 100 MW Wide-aperture X-band Klystron with RF Absorbing Drift Tubes”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP045L, pp. 2143-2145.
[n] J. S. Eldred and A. Valishev, “Design Considerations for Proposed Fermilab Integrable RCS”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1138-1141. doi:10.18429/JACoW-NAPAC2016-THPOA19
[n] G. Lambert et al., “Seeding the FEL of the SCSS Test Accelerator with the 5th Harmonic of a Ti: Sa Laser Produced in Gases”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC018, pp. 109-111.
[n] M. Pezzetti, TB. Barbe, C. F. Fluder, TK. Kubla, SR. Rog, and AT. Tovar-Gonzalez, “Unified Software Production Process for CERN Cryogenic Control Applications”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1480-1484. doi:10.18429/JACoW-ICALEPCS2023-THPDP065
[n] J. Frisch, D. Bernstein, D. Brown, and E. Cisneros, “A High Stability, Low Noise RF Distribution System”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH023, pp. 816-818.
[n] S. H. Lee et al., “Mechanical Design of a Compact Collinear Wakefield Accelerator”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 276. doi:10.18429/JACoW-MEDSI2020-WEPB05
[n] C. R. Emigh, E. A. Meyer, and D. W. Mueller, “Test of LASL Ion Source with 750-kV Accelerating Column”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper J-2, pp. 1007-1025.
[n] G. H. Luo et al., “Asynchronized Energy Ramping at SRRC Storage Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAA04, pp. 201-203.
[n] E. Renner et al., “Towards the slow extraction of mixed He-2+ and C-6+ beams for online range verification”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3603-3606. doi:10.18429/JACoW-IPAC2024-THPR43
[n] C. F. Fluder, V. Lefebvre, M. Pezzetti, A. Tovar, P. Plutecki, and T. Wolak, “Automation of the Software Production Process for Multiple Cryogenic Control Applications”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 375-379. doi:10.18429/JACoW-ICALEPCS2017-TUPHA006
[n] P. L. Morton and N. C. Spencer, “Effects of Transverse Coupling in the SLAC Storage Ring”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 1099-1101.
[n] S. C. Huang, Y. He, T. Tan, and S. X. Zhang, “The Electromagnetic Optimization of TE-sample Host Cavity at IMP”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 852-854. doi:10.18429/JACoW-LINAC2018-THPO069
For LaTeX
Use Complete Form
For BibTeX
References
- J. Guyot, M. O. Ounsy, and S. Pierre-Joseph Zephir, “Status of the TANGO Archiving System”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper RPPA27, pp. 570-572.
- A. Aleksandrov, S. Assadi, W. Blokland, C. Deibele, W. Grice, and J. Pogge, “Beam in Gap Measurements at the SNS Front-End”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAG041, pp. 1524-1526.
- W. M. Fawley et al., “Time-dependent Degradation of an Ion-Focused ATA Beam”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1489-1492.
- E. V. Kaportsev et al., “Modernization of the Automated Control System in the Kurchatov Synchrotron Radiation Source”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper WEPPD052, pp. 659-661.
- L. M. Sevryukova et al., “Superconducting RF Activities at Federate Problem Lab for Technology and Study of the SC Cavities of the Ministry of the Russian Federation for Atomic Energy at the Institute for High Energy Physics”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PT004, pp. XX-XX.
- M. Farkhondeh, S. P. Holmberg, W. W. Sapp, and J. D. Zumbro, “Fiducialization of Magnets for the MIT-Bates SHR”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 634-637.
- A. Zholents, M. Zolotorev, and W. Wan, “Design and Analysis of a Cooling Insertion Lattice for Optical Stochastic Cooling”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4V030, pp. 1801-1803.
- W. Meyer et al., “Generation of High Power 140 GHz Microwaves with an FEL for the MTX Experiment”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1551-1554.
- N. I. Azorsky et al., “Experimental Study of 100 MW Wide-aperture X-band Klystron with RF Absorbing Drift Tubes”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP045L, pp. 2143-2145.
- J. S. Eldred and A. Valishev, “Design Considerations for Proposed Fermilab Integrable RCS”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 1138-1141.
- G. Lambert et al., “Seeding the FEL of the SCSS Test Accelerator with the 5th Harmonic of a Ti: Sa Laser Produced in Gases”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC018, pp. 109-111.
- M. Pezzetti, TB. Barbe, C. F. Fluder, TK. Kubla, SR. Rog, and AT. Tovar-Gonzalez, “Unified Software Production Process for CERN Cryogenic Control Applications”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THPDP065, pp. 1480-1484.
- J. Frisch, D. Bernstein, D. Brown, and E. Cisneros, “A High Stability, Low Noise RF Distribution System”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH023, pp. 816-818.
- S. H. Lee et al., “Mechanical Design of a Compact Collinear Wakefield Accelerator”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 276.
- C. R. Emigh, E. A. Meyer, and D. W. Mueller, “Test of LASL Ion Source with 750-kV Accelerating Column”, in Proc. 1970 Linear Accelerator Conf. (LINAC'70), Batavia, IL, USA, Sep.-Oct. 1970, paper J-2, pp. 1007-1025.
- G. H. Luo et al., “Asynchronized Energy Ramping at SRRC Storage Ring”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAA04, pp. 201-203.
- E. Renner et al., “Towards the slow extraction of mixed He-2+ and C-6+ beams for online range verification”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR43, pp. 3603-3606.
- C. F. Fluder, V. Lefebvre, M. Pezzetti, A. Tovar, P. Plutecki, and T. Wolak, “Automation of the Software Production Process for Multiple Cryogenic Control Applications”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 375-379.
- P. L. Morton and N. C. Spencer, “Effects of Transverse Coupling in the SLAC Storage Ring”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 1099-1101.
- S. C. Huang, Y. He, T. Tan, and S. X. Zhang, “The Electromagnetic Optimization of TE-sample Host Cavity at IMP”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 852-854.
Back to search