Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] W. Duckitt, J. Abraham, J. L. Conradie, M. J. Van Niekerk, and T. R. Niesler, “A New Digital Low-level RF Control System for Cyclotrons”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 258-262. doi:10.18429/JACoW-Cyclotrons2016-WEB01
[n] U. Bhunia et al., “Operational Experience of Superconducting Cyclotron Magnet at VECC, Kolkata”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP076, pp. 203-205.
[n] N. M. Gelfand, R. Johnson, and P. Zhang, “Measurements of beta in the TEVATRON and Comparisons with Calculations”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1427-1429.
[n] J. G. Alessi, A. Hershcovitch, A. Kponou, Th. Sluyters, and T. Niinikoski, “Polarized H- Source Development at BNL”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper MO3-39, pp. 134-137.
[n] M. K. Dey et al., “Design of the Proposed 250 Mev Superconducting Cyclotron Magnet”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA022, pp. 661-663.
[n] H. Hisamatsu et al., “Present Status of KEKB Vacuum System”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP1A18, pp. 2304-2306.
[n] S. Dutta et al., “Mechanical Coupling between the LHC Cryogenic Distribution Line and the Short Straight Section housing the Superconducting Quadrupole.Theoretical Analysis and Experimental Validation”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA085, pp. 758-760.
[n] S. H. Nam, S. H. Jeong, and I. S. Ko, “Operating Characteristics of the PLS Injection Kicker Modulator”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D076, pp. 588-592.
[n] B. Lorbeer, B. Beutner, H. T. Duhme, L. Froehlich, D. Lipka, and D. Noelle, “Energy Beam Position Monitor Button Array Electronics for the European XFEL”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1927-1929. doi:10.18429/JACoW-IPAC2018-WEPAF049
[n] K. V. Ettinger, J. H. Fremlin, and N. A. Askouri, “Measurement of Wear and Corrosion by Surface Irradiation with Charged Particle Beams”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper G-08, pp. 518-521.
[n] E. P. Lee, A. Faltens, L. J. Laslett, and L. Smith, “Stabilization of Longitudinal Modes in a High Current Betatron”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2504-2507.
[n] A. D. McInturff and D. Gross, “Magnetization Characterization Study for the Energy Saver/Doubler Dipoles”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3211-3214.
[n] M. Gabriel and R. Gorbonosov, “Disruptor - Using High Performance, Low Latency Technology in the CERN Control System”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 606-609. doi:10.18429/JACoW-ICALEPCS2015-WEB3O03
[n] B. Beutner, “Longitudinal Design and RF Stability Requirements for the SwissFEL Facility”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI057, pp. 2821-2823.
[n] J. Haissinski et al., “Phasefix-Correcting the Tunes of the SLC Arcs”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1352-1355.
[n] R. Stover, R. Dwinell, J. Halliwell, I. Lutz, and M. Nyman, “A Raster Scanning Power Supply System fo Controlling Relativistic Heavy Ion Beams at the Bevalac Biomedical Facility”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1410-1413.
[n] N. M. Gelfand, “Tune Drifts on the Tevatron Front Porch”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS017, pp. 1691-1693.
[n] R. S. Sandha, S. C. Bapna, J. Dwivedi, V. C. Petwal, and H. C. Soni, “Prototype Beam Dump For 10 kW LINAC”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA087, pp. 764-766.
[n] J. Egberts et al., “Design and Test of the LIPAc IPM”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper TUPG021, pp. 180-182.
[n] A. A. Arzumanov, “TECHNIQUE FOR IRRADIATION OF NB-GA TARGETS AT KAZAKHSTAN ISOCHRONOUS CYCLOTRON”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 19P06, pp. XX-XX.
[n] M. K. Dey, A. Chakrabarti, and A. Dutta Gupta, “Design of Ultra-Light Superconducting Proton Cyclotron for Production of Isotopes for Medical Applications”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TH2PB01, pp. 446-450.
[n] S. H. Gold and W. Gai, “High-Power Testing of 11.424-GHz Dielectric-Loaded Accelerating Structures”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH132, pp. 3984-3986.
[n] C. Cyterski and E. P. Chin, “Personnel Protection System Upgrade for the LCLS Electron Beam Linac”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 157-159. doi:10.18429/JACoW-ICALEPCS2015-MOPGF029
[n] S. Ghosh, A. Mandal, U. Panda, S. Seth, and S. S. Som, “Testing of Inductive Output Tube based RF Amplifier for 650 MHz SRF Cavities”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THPD21, pp. 187-189.
[n] N. M. Gelfand, “Amplitude Dependence of the Tune Shift”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1014-1017.
[n] E. P. Chojnacki, R. D. Ehrlich, M. Liepe, J. Sears, and E. N. Smith, “DC Conductivity of RF Absorbing Materials”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO035, pp. 643-647.
[n] E. Chojnacki, T. J. Davis, J. D. Ivers, and J. A. Nation, “Upper Hybrid Wave Collective Acceleration Studies”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 734-737.
[n] A. Schempp, H. Deitinghoff, M. de Saint Simon, C. Thibault, and F. Botlo-Pilat, “Deceleration of Antiprotons with a RFQ”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH435, pp. 683-685.
[n] P. Gerhard et al., “Experience with a 4-Rod CW Radio Frequency Quadrupole”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPLB07, pp. 825-827.
[n] J. K. Sekutowicz et al., “Second CW and LP Operation Test of XFEL Prototype Cryomodule”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB019, pp. 516-518.
[n] M. Ahammed et al., “Fabrication and Installation of Radio Frequency System for K500 Superconducting Cyclotron at Kolkata”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA001, pp. 3673-3675.
[n] J. R. Richardson, “Session III Summary”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59C01, pp. 141-141.
[n] G. Torrisi et al., “Microwave Injection and Coupling Optimization in ECR and MDIS Ion Sources”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1724-1726. doi:10.18429/JACoW-IPAC2017-TUPIK021
[n] S. Antipov, E. Efimenko, A. Romanenko, and D. A. Sergatskov, “Time-Resolved Measurements of High-Field Quench in SRF Cavities”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP112, pp. 743-746.
[n] S. N. Lapitsky, A. F. Lukyantsev, V. S. Seleznev, P. V. Shevtsov, and S. I. Tomin, “Possible Approach to the Creation of Systems for High Energy Proton Beam Losses Measurements (part 2 -Mathematical Aspects and Experimental Results)”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1055-1058.
[n] L. J. Laslett and A. M. Sessler, “A Method for Static-Field Compression in an Electron-Ring Accelerator”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 1034-1039.
[n] E. Lecorche et al., “Overview of the GANIL Control Systems for the Different Projects Around the Facility”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 406-410. doi:10.18429/JACoW-ICALEPCS2017-TUPHA016
[n] S. N. Lapitsky, V. E. Rakhmatov, and V. S. Seleznev, “The Sealed Beam Intensity Monitors”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1106-1109.
[n] J. R. Richardson, “Session III Introductory Comments”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59C02, pp. 142-142.
[n] F. Chmara, G. Ryding, and J. Shaw, “A Study of Vacuum Requirements for the Acceleration of Heavy Ions in an MP Tandem Van de Graaff”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 100-105.
[n] L. C. Cao et al., “The Design of Scanning Control System for Proton Therapy Facility at CIAE”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 319-321. doi:10.18429/JACoW-IBIC2018-TUPC10
For LaTeX
Use Complete Form
For BibTeX
References
- W. Duckitt, J. Abraham, J. L. Conradie, M. J. Van Niekerk, and T. R. Niesler, “A New Digital Low-level RF Control System for Cyclotrons”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 258-262.
- U. Bhunia et al., “Operational Experience of Superconducting Cyclotron Magnet at VECC, Kolkata”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper MOPCP076, pp. 203-205.
- N. M. Gelfand, R. Johnson, and P. Zhang, “Measurements of beta in the TEVATRON and Comparisons with Calculations”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1427-1429.
- J. G. Alessi, A. Hershcovitch, A. Kponou, Th. Sluyters, and T. Niinikoski, “Polarized H- Source Development at BNL”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper MO3-39, pp. 134-137.
- M. K. Dey et al., “Design of the Proposed 250 Mev Superconducting Cyclotron Magnet”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THPMA022, pp. 661-663.
- H. Hisamatsu et al., “Present Status of KEKB Vacuum System”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP1A18, pp. 2304-2306.
- S. Dutta et al., “Mechanical Coupling between the LHC Cryogenic Distribution Line and the Short Straight Section housing the Superconducting Quadrupole.Theoretical Analysis and Experimental Validation”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THPMA085, pp. 758-760.
- S. H. Nam, S. H. Jeong, and I. S. Ko, “Operating Characteristics of the PLS Injection Kicker Modulator”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D076, pp. 588-592.
- B. Lorbeer, B. Beutner, H. T. Duhme, L. Froehlich, D. Lipka, and D. Noelle, “Energy Beam Position Monitor Button Array Electronics for the European XFEL”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1927-1929.
- K. V. Ettinger, J. H. Fremlin, and N. A. Askouri, “Measurement of Wear and Corrosion by Surface Irradiation with Charged Particle Beams”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper G-08, pp. 518-521.
- E. P. Lee, A. Faltens, L. J. Laslett, and L. Smith, “Stabilization of Longitudinal Modes in a High Current Betatron”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2504-2507.
- A. D. McInturff and D. Gross, “Magnetization Characterization Study for the Energy Saver/Doubler Dipoles”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3211-3214.
- M. Gabriel and R. Gorbonosov, “Disruptor - Using High Performance, Low Latency Technology in the CERN Control System”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 606-609.
- B. Beutner, “Longitudinal Design and RF Stability Requirements for the SwissFEL Facility”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI057, pp. 2821-2823.
- J. Haissinski et al., “Phasefix-Correcting the Tunes of the SLC Arcs”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1352-1355.
- R. Stover, R. Dwinell, J. Halliwell, I. Lutz, and M. Nyman, “A Raster Scanning Power Supply System fo Controlling Relativistic Heavy Ion Beams at the Bevalac Biomedical Facility”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1410-1413.
- N. M. Gelfand, “Tune Drifts on the Tevatron Front Porch”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS017, pp. 1691-1693.
- R. S. Sandha, S. C. Bapna, J. Dwivedi, V. C. Petwal, and H. C. Soni, “Prototype Beam Dump For 10 kW LINAC”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THPMA087, pp. 764-766.
- J. Egberts et al., “Design and Test of the LIPAc IPM”, in Proc. 15th Beam Instrumentation Workshop (BIW'12), Newport News, VA, USA, Apr. 2012, paper TUPG021, pp. 180-182.
- A. A. Arzumanov, “TECHNIQUE FOR IRRADIATION OF NB-GA TARGETS AT KAZAKHSTAN ISOCHRONOUS CYCLOTRON”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 19P06, pp. XX-XX.
- M. K. Dey, A. Chakrabarti, and A. Dutta Gupta, “Design of Ultra-Light Superconducting Proton Cyclotron for Production of Isotopes for Medical Applications”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper TH2PB01, pp. 446-450.
- S. H. Gold and W. Gai, “High-Power Testing of 11.424-GHz Dielectric-Loaded Accelerating Structures”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH132, pp. 3984-3986.
- C. Cyterski and E. P. Chin, “Personnel Protection System Upgrade for the LCLS Electron Beam Linac”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 157-159.
- S. Ghosh, A. Mandal, U. Panda, S. Seth, and S. S. Som, “Testing of Inductive Output Tube based RF Amplifier for 650 MHz SRF Cavities”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper THPD21, pp. 187-189.
- N. M. Gelfand, “Amplitude Dependence of the Tune Shift”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1014-1017.
- E. P. Chojnacki, R. D. Ehrlich, M. Liepe, J. Sears, and E. N. Smith, “DC Conductivity of RF Absorbing Materials”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO035, pp. 643-647.
- E. Chojnacki, T. J. Davis, J. D. Ivers, and J. A. Nation, “Upper Hybrid Wave Collective Acceleration Studies”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 734-737.
- A. Schempp, H. Deitinghoff, M. de Saint Simon, C. Thibault, and F. Botlo-Pilat, “Deceleration of Antiprotons with a RFQ”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH435, pp. 683-685.
- P. Gerhard et al., “Experience with a 4-Rod CW Radio Frequency Quadrupole”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPLB07, pp. 825-827.
- J. K. Sekutowicz et al., “Second CW and LP Operation Test of XFEL Prototype Cryomodule”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper TUPB019, pp. 516-518.
- M. Ahammed et al., “Fabrication and Installation of Radio Frequency System for K500 Superconducting Cyclotron at Kolkata”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEA001, pp. 3673-3675.
- J. R. Richardson, “Session III Summary”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59C01, pp. 141-141.
- G. Torrisi et al., “Microwave Injection and Coupling Optimization in ECR and MDIS Ion Sources”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1724-1726.
- S. Antipov, E. Efimenko, A. Romanenko, and D. A. Sergatskov, “Time-Resolved Measurements of High-Field Quench in SRF Cavities”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper TUP112, pp. 743-746.
- S. N. Lapitsky, A. F. Lukyantsev, V. S. Seleznev, P. V. Shevtsov, and S. I. Tomin, “Possible Approach to the Creation of Systems for High Energy Proton Beam Losses Measurements (part 2 -Mathematical Aspects and Experimental Results)”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1055-1058.
- L. J. Laslett and A. M. Sessler, “A Method for Static-Field Compression in an Electron-Ring Accelerator”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 1034-1039.
- E. Lecorche et al., “Overview of the GANIL Control Systems for the Different Projects Around the Facility”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 406-410.
- S. N. Lapitsky, V. E. Rakhmatov, and V. S. Seleznev, “The Sealed Beam Intensity Monitors”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1106-1109.
- J. R. Richardson, “Session III Introductory Comments”, in Proc. Conf. on Sector-Focused Cyclotrons (Cyclotrons'59), Oak Ridge, TN, USA, Jul. 1959, paper CYC59C02, pp. 142-142.
- F. Chmara, G. Ryding, and J. Shaw, “A Study of Vacuum Requirements for the Acceleration of Heavy Ions in an MP Tandem Van de Graaff”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 100-105.
- L. C. Cao et al., “The Design of Scanning Control System for Proton Therapy Facility at CIAE”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 319-321.
Back to search