Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y. Kolokolnikov et al., “5 T NON-SUPERCONDUCTING WIGGLER”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WEP010, pp. XX-XX.
[n] J. Farmer et al., “Proton-driven plasma wakefield acceleration for high-energy lepton beams”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPS006, unpublished.
[n] M. Gangeluk et al., “Acoustic Monitoring System of RF-Breakdowns inside the Electrodynamic Structures at Kurchatov SR Source Accelerators”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1986-1989.
[n] J. B. Gonz?ílez Fern?índez, S. A. McDonald, K. Nygard, and L. K. Roslund, “ForMAX Endstation - a Novel Design Combining Full-Field Tomography with Small- and Wide-Angle X-Ray Scattering”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 289. doi:10.18429/JACoW-MEDSI2020-WEPB12
[n] H. G. P. de Oliveira et al., “Validation Results for Sirius APU19 Front End Prototype”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 290-293. doi:10.18429/JACoW-MEDSI2018-WEPH39
[n] E. S. Masunov, P. N. Ostroumov, S. M. Polozov, and N. E. Vinogradov, “RF Focusing Methods for Heavy Ions in Low Energy Accelerators”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAG035, pp. 2963-2965.
[n] S. N. C. Bueno et al., “Vibration Assessment at the CARNA?ÜBA Beamline at Sirius/LNLS”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 37. doi:10.18429/JACoW-MEDSI2020-MOPB08
[n] G. Pile et al., “Commissioning Status of the Continuous Wave Deuterium Demonstrator”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1709-1712.
[n] A. Kadnikov et al., “Acoustic Measurements at DAW Accelerating Structures under Operating High RF Power Conditions”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP081L, pp. 2050-2052.
[n] S. Sampayan et al., “Performance Characteristics of an Induction Linac Magnetic Pulse Compression Modulator at Multi-Kilohertz Pulse Repetition Frequencies”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3097-3100.
[n] P. Ninin and L. Scibile, “The LHC Access Control System”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT031, pp. 1900-1902.
[n] N. Delerue et al., “Toward low multiplicity energy controllable beams at the CLEAR facility”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPM093, unpublished.
[n] D. S. Robin and B. Feinberg, “Status and Development of the ALS”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH076, pp. 2629-2631.
[n] J. M. De Conto, “GENEPI: A High Intensity Deuteron Accelerator for Pulsed Neutron Production”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP08F, pp. 685-687.
[n] P. Michel et al., “The Rossendorf IR-FEL ELBE”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper TUCAU02, pp. 488-491.
[n] T. Tajima, H. Miwa, Co. Ltd, and H. Ohta, “Evaluation of Dust Particles in the KEK Clean Room and Cleaning Methods Used for SC Cavity Assembly”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I38, pp. XX-XX.
[n] A. Gilmour, W. R. Araujo, and J. M. Polli, “Thermo-Mechanical Aspects of the MOBIPIX, a Compact X-Ray Imaging System with Embedded GPU”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 223-226. doi:10.18429/JACoW-MEDSI2018-WEPH12
[n] B. Nagler et al., “Laser Guiding of a 100 TW Laser Beam in a Capillary Discharge Waveguide”, presented at the PAC'05, Knoxville, TN, USA, May 2005, paper TPAE021, unpublished.
[n] E. Moog et al., “Design and Manufacture of a Prototype Undulator for the LCLS Project”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TOPA012, pp. 256-258.
[n] M. I. Green, B. Gee, S. Marks, J. Meneghetti, D. Nelson, and W. Wong, “Design, Fabrication, and Calibration of Curved Integral Coils for Measuring Transfer Function, Uniformity and Effective Length of LBL ALS Booster Dipole Magnets”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1972-1975.
[n] M. N. Fodje, R. Berg, G. Black, P. Grochulski, and K. Janzen, “Automation of the Macromolecular Crystallography Beamlines at the Canadian Light Source”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper THPL005, pp. 130-132.
[n] T. Asami, T. Kimura, R. Muto, and M. Tomizawa, “Update of the tune ripple canceller system for slow extraction operation in the J-PARC MR”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPS030, unpublished.
[n] M. Shibata, “Superconducting RF Activities at JAERI”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93B03, pp. XX-XX.
[n] P. Brunelle, G. Flynn, M. P. Level, A. Nadji, M. Sommer, and H. Zyngier, “Experiments with Low and Negative Momentum Compaction Factor with Super-ACO”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP090G, pp. 676-678.
[n] E. Kako et al., “High Gradient Tests of 1.3 GHz Superconducting Cavities”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO-77, pp. 251-253.
[n] R. A. Marsh, S. G. Anderson, D. J. Gibson, J. Hall, and B. Rusnak, “Fluorescence-Based Imaging Diagnostic for High Average Power Deuteron Beam”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2777-2779. doi:10.18429/JACoW-IPAC2019-WEPGW120
[n] K. A. Brown et al., “Python and MATLAB Interfaces to RHIC Controls Data”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 765-769. doi:10.18429/JACoW-ICALEPCS2017-TUPHA153
[n] S. Allison et al., “Electron Bunch Length Measurement for LCLS at SLAC”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper RPPB19, pp. 644-646.
For LaTeX
Use Complete Form
For BibTeX
References
- Y. Kolokolnikov et al., “5 T NON-SUPERCONDUCTING WIGGLER”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper WEP010, pp. XX-XX.
- J. Farmer et al., “Proton-driven plasma wakefield acceleration for high-energy lepton beams”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPS006, this conference.
- M. Gangeluk et al., “Acoustic Monitoring System of RF-Breakdowns inside the Electrodynamic Structures at Kurchatov SR Source Accelerators”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1986-1989.
- J. B. Gonz?ílez Fern?índez, S. A. McDonald, K. Nygard, and L. K. Roslund, “ForMAX Endstation - a Novel Design Combining Full-Field Tomography with Small- and Wide-Angle X-Ray Scattering”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 289.
- H. G. P. de Oliveira et al., “Validation Results for Sirius APU19 Front End Prototype”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 290-293.
- E. S. Masunov, P. N. Ostroumov, S. M. Polozov, and N. E. Vinogradov, “RF Focusing Methods for Heavy Ions in Low Energy Accelerators”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAG035, pp. 2963-2965.
- S. N. C. Bueno et al., “Vibration Assessment at the CARNA?ÜBA Beamline at Sirius/LNLS”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 37.
- G. Pile et al., “Commissioning Status of the Continuous Wave Deuterium Demonstrator”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1709-1712.
- A. Kadnikov et al., “Acoustic Measurements at DAW Accelerating Structures under Operating High RF Power Conditions”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP081L, pp. 2050-2052.
- S. Sampayan et al., “Performance Characteristics of an Induction Linac Magnetic Pulse Compression Modulator at Multi-Kilohertz Pulse Repetition Frequencies”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3097-3100.
- P. Ninin and L. Scibile, “The LHC Access Control System”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT031, pp. 1900-1902.
- N. Delerue et al., “Toward low multiplicity energy controllable beams at the CLEAR facility”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPM093, this conference.
- D. S. Robin and B. Feinberg, “Status and Development of the ALS”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH076, pp. 2629-2631.
- J. M. De Conto, “GENEPI: A High Intensity Deuteron Accelerator for Pulsed Neutron Production”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP08F, pp. 685-687.
- P. Michel et al., “The Rossendorf IR-FEL ELBE”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper TUCAU02, pp. 488-491.
- T. Tajima, H. Miwa, Co. Ltd, and H. Ohta, “Evaluation of Dust Particles in the KEK Clean Room and Cleaning Methods Used for SC Cavity Assembly”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93I38, pp. XX-XX.
- A. Gilmour, W. R. Araujo, and J. M. Polli, “Thermo-Mechanical Aspects of the MOBIPIX, a Compact X-Ray Imaging System with Embedded GPU”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 223-226.
- B. Nagler et al., “Laser Guiding of a 100 TW Laser Beam in a Capillary Discharge Waveguide”, presented at the 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAE021, unpublished.
- E. Moog et al., “Design and Manufacture of a Prototype Undulator for the LCLS Project”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TOPA012, pp. 256-258.
- M. I. Green, B. Gee, S. Marks, J. Meneghetti, D. Nelson, and W. Wong, “Design, Fabrication, and Calibration of Curved Integral Coils for Measuring Transfer Function, Uniformity and Effective Length of LBL ALS Booster Dipole Magnets”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1972-1975.
- M. N. Fodje, R. Berg, G. Black, P. Grochulski, and K. Janzen, “Automation of the Macromolecular Crystallography Beamlines at the Canadian Light Source”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper THPL005, pp. 130-132.
- T. Asami, T. Kimura, R. Muto, and M. Tomizawa, “Update of the tune ripple canceller system for slow extraction operation in the J-PARC MR”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPS030, this conference.
- M. Shibata, “Superconducting RF Activities at JAERI”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93B03, pp. XX-XX.
- P. Brunelle, G. Flynn, M. P. Level, A. Nadji, M. Sommer, and H. Zyngier, “Experiments with Low and Negative Momentum Compaction Factor with Super-ACO”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP090G, pp. 676-678.
- E. Kako et al., “High Gradient Tests of 1.3 GHz Superconducting Cavities”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper MO-77, pp. 251-253.
- R. A. Marsh, S. G. Anderson, D. J. Gibson, J. Hall, and B. Rusnak, “Fluorescence-Based Imaging Diagnostic for High Average Power Deuteron Beam”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2777-2779.
- K. A. Brown et al., “Python and MATLAB Interfaces to RHIC Controls Data”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 765-769.
- S. Allison et al., “Electron Bunch Length Measurement for LCLS at SLAC”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper RPPB19, pp. 644-646.
Back to search