JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	E. Acerbi et al., “Acceleration of H- Ions and Extracted Beam Measurements in the Milan Cyclotron”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper G-003, pp. XX-XX. 
[n]	T. Schultheiss et al., “RF/Thermal/Structural Analysis of the APT LEDA Hot Model Cavity Assembly”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH087, pp. 969-971. 
[n]	J. R. Delayen, C. L. Bohn, W. L. Kennedy, B. J. Micklich, C. T. Roche, and L. Sagalovsky, “Development of High-Current Superconducting Accelerators at Argonne National Laboratory”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93A02, pp. XX-XX. 
[n]	A. C. Starritt, A. Pozar, and Y. E. Tan, “Orbit Feedback and Beam Stability at the Australian Synchrotron”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3805-3807. doi:10.18429/JACoW-IPAC2019-THPRB005
[n]	W. Vinzenz, W. Barth, H.-L. Dambowy, L. Groening, M. Hoerr, and G. Schreiber, “High Power RF Supplies for the FAIR Injector Linacs”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper THP078, pp. 975-977. 
[n]	V. Gupta, J. Hussain, and G. Mishra, “Variable Polarized Harmonic Undulator Free Electron Laser and Effect of Beam Energy Spread”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper MOPC19, pp. 83-86. 
[n]	S. C. F. Rose, D. H. C. Araujo, L. A. Mello Magalhães, and A. L. Olsson, “Apples to Oranges: A Comparison of EPICS Build and Deployment Systems”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 205-209. doi:10.18429/JACoW-ICALEPCS2023-MO4BCO05
[n]	P. Patwari, A. S. Banerjee, G. Muralikrishna, and S. Roy Chaudhuri, “Towards Building Reusability in Control Systems - a Journey”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 593-597. doi:10.18429/JACoW-ICALEPCS2015-WEA3O03
[n]	K. P. Mondal et al., “Epitaxial growth of cesium potassium antimonide photocathode”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper WEPC44, unpublished. 
[n]	A. R. Borden and R. C. Wolgast, “Mechanically Improved Rectangular Cable”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3399-3402. 
[n]	D. J. Armistead, D. L. Bolton, and M. G. Mazarakis, “Mechanical and Magnetic Alignment Techniques for the RADLAC-II Linear Accelerator”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 942-945. 
[n]	M. G. Mazarakis, “Pencil-Like mm-Size Electron Beams Produced with Linear Inductive Voltage Adders (LIVA)”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TUP02, pp. 326-328. 
[n]	B. H. Oh et al., “Development of 14.5 GHz Electron Cyclotron Resonance Ion Source at KAERI”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper TUCOCK03, pp. 105-108. 
[n]	M. Musardo et al., “A New PCB Rotating Coil at NSLS-II”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 816-819. doi:10.18429/JACoW-NAPAC2022-WEPA77
[n]	K. Madisa, N. Marais, A. J. T. Ramaila, and L. Van den Heever, “Integration of MeerKAT and SKA Telescopes using KATCP/Tango Translators”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1964-1968. doi:10.18429/JACoW-ICALEPCS2017-THSH201
[n]	M. Di Carlo, M. Dolci, P. Harding, J. B. Morgado, P. Osorio, and U. Y. Yilmaz, “Monitoring the SKA Infrastructure for CICD”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 622-626. doi:10.18429/JACoW-ICALEPCS2023-TUPDP045
[n]	S. J. Smith, R. Apsimon, G. Burt, S. Setiniyaz, and M. J. W. Southerby, “Visualisation of Pareto Optimal Spaces and Optimisation Solution Selection Using Parallel Coordinate Plots”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2487-2490. doi:10.18429/JACoW-IPAC2022-THPOST020
[n]	P. Goudket et al., “Impedance Measurements on a Test Bench Model of the ILC Crab Cavity”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN077, pp. 2206-2208. 
[n]	D. Schulte, G. Guignard, N. Leros, and E. T. d'Amico, “Simulation Package based on PLACET”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH082, pp. 3033-3035. 
[n]	I. L. Strydom, “An Overview of the South African Isotope Facility (SAIF) Project”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper WEBI01, pp. 170-175. doi:10.18429/JACoW-CYCLOTRONS2022-WEBI01
[n]	L. Ratner, A. V. Crewe, R. George, and L. C. Teng, “Experimental Area Beams from the ANL 12.5 BeV Proton Synchrotron”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 877-882. 
[n]	A. D. Kovalenko et al., “Design and Study of a Superferric Model Dipole and Quadrupole Magnets for the GSI Fast-pulsed Synchrotron SIS100.”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPKF057, pp. 1735-1737. 
[n]	J. D. Fuerst and J. C. Theilacker, “Increasing the Energy of the Fermilab Tevatron Accelerator”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2458-2461. 
[n]	G. Gelato and L. Magnani, “Better Dynamic Closed Loop control of the PSB RF Accelerating System”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1536-1539. 
[n]	J. L. Conradie, J. C. Cornell, and D. T. Fourie, “Transfer Beamlines for ECR and Polarized-Ion Sources for a New Injector Cyclotron at NAC”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F7-01, pp. 376-379. 
[n]	A. H. Barnard, “Design of a Spiral Inflector at iThemba LABS for Injecting the Beam into a Cyclotron”, in Proc. Cyclotrons'22, Beijing, China, Dec. 2022, paper FRBI02, pp. 373-377. doi:10.18429/JACoW-CYCLOTRONS2022-FRBI02
[n]	F. Jafarinia, C. Grech, G. Geloni, and M. Guetg, “Simulation study on a virtual diagnostics concept for X-ray pulse characterisation”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1813-1815. doi:10.18429/JACoW-IPAC2023-TUPL021
[n]	B. E. Norum, “Overview of cw Electron Accelerator Proposals”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3250-3252. 
[n]	J. Kim, G. Jang, J. Lee, and J. Seok, “The Korea-4GSR storage ring lattice design”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPS089, unpublished. 
[n]	M. P. Kelly, M. Kedzie, K. W. Shepard, and G. Zinkann, “Cold Tests of a Spoke Cavity Prototype for RIA”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH117, pp. 1047-1049. 
[n]	N. Leros and D. Schulte, “Feedback Response in the CLIC Main Linac to Transverse and Longitudinal Dynamic Imperfections”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI060, pp. 464-466. 
[n]	J. C. Bergstrom, H. S. Caplan, B. E. Norum, and R. V. Servranckx, “SORE- - A Pulse Stretcher for the Saskatchewan 300-MeV Linac”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3226-3229. 
[n]	G. Gelato, H. Koziol, M. Le Gras, and D. J. Williams, “The Closed Orbit Observation System of the CERN Antiproton Accumulator”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2186-2189. 
[n]	S. Jensen et al., “SIP4C/C++ at CERN - Status and Lessons Learned”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 785-788. doi:10.18429/JACoW-ICALEPCS2017-TUPHA161
[n]	H. Huang et al., “Proton Emittance Measurements in the Brookhaven AGS”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPF01, pp. 492-494. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search