Favourites
For Word
[n] G. Eremeev, H. Padamsee, M. Liepe, and R. Roy, “Effect of Mild Baking on High Field Q-Drop of BCP Cavity”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper MOP18, pp. 70-73.
[n] M. E. Angoletta et al., “Operational Experience With the New Digital Low-Level RF System for CERN's PS Booster”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4058-4061. doi:10.18429/JACoW-IPAC2017-THPAB143
[n] T. Mitsumoto et al., “Orbit Analysis for the RIKEN Superconducting Ring Cyclotron”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7W032, pp. 1069-1071.
[n] S. Hirlaender et al., “Energy Dependence of the Reproducibility and Injection Efficiency of the LINAC3-LEIR Complex”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3188-3191. doi:10.18429/JACoW-IPAC2019-WEPTS040
[n] K. Koyama, Z. Chen, T. Takahashi, and M. Uesaka, “Microbeam Irradiation System with a Dielectric Laser Accelerator for Radiobiology Research”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1664-1666. doi:10.18429/JACoW-IPAC2018-TUPML054
[n] P. Boccard, P. Kneisel, G. M??ller, J. Pouryamout, and H. Piel, “Results From Some Temperature Mapping Experiments on Nb3Sn RF Cavities”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97D32, pp. 1094-1102.
[n] R. Kersevan, C. Garion, and N. Kos, “Preliminary Design of the HiLumi-LHC Triplet Area Beam Screen”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2378-2380. doi:10.18429/JACoW-IPAC2014-WEPME048
[n] W. Blokland, T. J. McManamy, and T. J. Shea, “SNS Target Imaging System Software and Analysis”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM003, pp. 93-97.
[n] D. A. Walsh, S. P. Jamison, E. W. Snedden, and T. Lefevre, “A High Resolution Single-Shot Longitudinal Profile Diagnostic Using Electro-Optic Transposition”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 752-755. doi:10.18429/JACoW-IBIC2016-WEPG49
[n] A. Buteau, G. Abeille, X. Deletoille, J.-F. Lamarre, T. Marion, and L. S. Nadolski, “Inception of a Learning Organization to Improve SOLEIL's Operation”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1001. doi:10.18429/JACoW-ICALEPCS2019-WEMPL004
[n] A. V. Semenov et al., “Ion Injector Based on Tandem Accelerator”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD020, pp. 717-719.
[n] N. Nakamura, R. Kato, T. Miyajima, M. Shimada, R. Hajima, and T. Hotei, “S2E Simulation of an ERL-Based High-Power EUV-FEL Source for Lithography”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 894-897. doi:10.18429/JACoW-IPAC2017-MOPVA020
[n] E. I. Simakov et al., “An Update on a Superconducting Photonic Band Gap Structure Resonator Experiment”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEOAB03, pp. 2140-2142.
[n] L. Froehlich, P. K. Bartkiewicz, and M. Walla, “Magnet Server and Control System Database Infrastructure for the European XFEL”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 701-704. doi:10.18429/JACoW-ICALEPCS2015-WEPGF006
[n] M. Yamamoto, T. Taniuchi, K. Kubo, T. Higo, and K. Takata, “Realistic Design of Detuned Structure for JLC”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-48, pp. 447-449.
[n] B. Scheible, A. Penirschke, H. De Gersem, H. Schlarb, M. Czwalinna, and W. Ackermann, “Tolerance analysis of a bunch arrival-time monitor design with rod-shaped pickups on a printed circuit board for the European XFEL and FELBE”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4879-4882. doi:10.18429/JACoW-IPAC2023-THPL190
[n] J. W. Flanagan, “Diagnostics for Ultra-low Emittance Beams”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEYB01, pp. 1959-1963.
[n] P. Marchand, W. Gloor, M. Pedrozzi, Ph. Br?®dy, and A. Anghel, “Cryogenic System for the SLS Third Harmonic RF Cavity”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPDO009, pp. 2268-2270.
[n] W. S. Trzeciak and M. A. Green, “Beam Stability Studies and Improvements at Aladdin”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP52, pp. 2391-2393.
[n] A. Masi, G. Conte, R. Losito, and M. Martino, “Driving the LHC Collimators' Stepping Motors over 1 km with High Accuracy avoiding EMI Effects”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS040, pp. 1626-1628.
[n] K. Ruwali, K. Hosoyama, K. Nakanishi, Y. Teramoto, and A. Yamanaka, “Dependence of Superconducting Wire Motion on the Base Insulating Material in Magnetic Field”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP004, pp. 2787-2789.
[n] P. Duval, R. Bacher, H. Ehrlichmann, D. Haupt, M. Lomperski, and J. Bobnar, “Automating Operation Statistics at PETRA-3”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 876-879. doi:10.18429/JACoW-ICALEPCS2017-TUPHA189
For LaTeX
Use Complete Form
For BibTeX
References
- G. Eremeev, H. Padamsee, M. Liepe, and R. Roy, “Effect of Mild Baking on High Field Q-Drop of BCP Cavity”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper MOP18, pp. 70-73.
- M. E. Angoletta et al., “Operational Experience With the New Digital Low-Level RF System for CERN's PS Booster”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4058-4061.
- T. Mitsumoto et al., “Orbit Analysis for the RIKEN Superconducting Ring Cyclotron”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7W032, pp. 1069-1071.
- S. Hirlaender et al., “Energy Dependence of the Reproducibility and Injection Efficiency of the LINAC3-LEIR Complex”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3188-3191.
- K. Koyama, Z. Chen, T. Takahashi, and M. Uesaka, “Microbeam Irradiation System with a Dielectric Laser Accelerator for Radiobiology Research”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1664-1666.
- P. Boccard, P. Kneisel, G. M??ller, J. Pouryamout, and H. Piel, “Results From Some Temperature Mapping Experiments on Nb3Sn RF Cavities”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97D32, pp. 1094-1102.
- R. Kersevan, C. Garion, and N. Kos, “Preliminary Design of the HiLumi-LHC Triplet Area Beam Screen”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2378-2380.
- W. Blokland, T. J. McManamy, and T. J. Shea, “SNS Target Imaging System Software and Analysis”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUPSM003, pp. 93-97.
- D. A. Walsh, S. P. Jamison, E. W. Snedden, and T. Lefevre, “A High Resolution Single-Shot Longitudinal Profile Diagnostic Using Electro-Optic Transposition”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 752-755.
- A. Buteau, G. Abeille, X. Deletoille, J.-F. Lamarre, T. Marion, and L. S. Nadolski, “Inception of a Learning Organization to Improve SOLEIL's Operation”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1001.
- A. V. Semenov et al., “Ion Injector Based on Tandem Accelerator”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD020, pp. 717-719.
- N. Nakamura, R. Kato, T. Miyajima, M. Shimada, R. Hajima, and T. Hotei, “S2E Simulation of an ERL-Based High-Power EUV-FEL Source for Lithography”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 894-897.
- E. I. Simakov et al., “An Update on a Superconducting Photonic Band Gap Structure Resonator Experiment”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEOAB03, pp. 2140-2142.
- L. Froehlich, P. K. Bartkiewicz, and M. Walla, “Magnet Server and Control System Database Infrastructure for the European XFEL”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 701-704.
- M. Yamamoto, T. Taniuchi, K. Kubo, T. Higo, and K. Takata, “Realistic Design of Detuned Structure for JLC”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-48, pp. 447-449.
- B. Scheible, A. Penirschke, H. De Gersem, H. Schlarb, M. Czwalinna, and W. Ackermann, “Tolerance analysis of a bunch arrival-time monitor design with rod-shaped pickups on a printed circuit board for the European XFEL and FELBE”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL190, pp. 4879-4882.
- J. W. Flanagan, “Diagnostics for Ultra-low Emittance Beams”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEYB01, pp. 1959-1963.
- P. Marchand, W. Gloor, M. Pedrozzi, Ph. Br?®dy, and A. Anghel, “Cryogenic System for the SLS Third Harmonic RF Cavity”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPDO009, pp. 2268-2270.
- W. S. Trzeciak and M. A. Green, “Beam Stability Studies and Improvements at Aladdin”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP52, pp. 2391-2393.
- A. Masi, G. Conte, R. Losito, and M. Martino, “Driving the LHC Collimators' Stepping Motors over 1 km with High Accuracy avoiding EMI Effects”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS040, pp. 1626-1628.
- K. Ruwali, K. Hosoyama, K. Nakanishi, Y. Teramoto, and A. Yamanaka, “Dependence of Superconducting Wire Motion on the Base Insulating Material in Magnetic Field”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP004, pp. 2787-2789.
- P. Duval, R. Bacher, H. Ehrlichmann, D. Haupt, M. Lomperski, and J. Bobnar, “Automating Operation Statistics at PETRA-3”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 876-879.
Back to search