Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. A. Holmes, S. M. Cousineau, T. V. Gorlov, and M. A. Plum, “Injection of a Self-Consistent Beam at the Spallation Neutron Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4516-4518. doi:10.18429/JACoW-IPAC2017-THPVA037
[n] K. M. Crowe and R. P. Haddock, “The Effect of Duty Cycle on the Research Potential of Pion Factories”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63D05, pp. XX-XX.
[n] R. Bingham, “Laboratory Astrophysics Using High Energy Density Photon and Electron Beams”, presented at the PAC'05, Knoxville, TN, USA, May 2005, paper FOAD003, unpublished.
[n] R. A. Belshe, V. P. Elischer, and V. Jacobson, “The Feasibility and Advantages of Commercial Process I/O Systems for Accelerator Control”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1036-1042.
[n] L. Rivkin et al., “Bunch Lengthening in the SLC Damping Ring”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 634-637.
[n] R. Rimmer, D. A. Goldberg, A. F. Jacob, G. R. Lambertson, and F. Voelker, “Beam Impedance Measurements on the ALS Curved Sector Tank”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1055-1058.
[n] J. M. Nogiec et al., “A Highly Configurable and Scriptable Software System for Fully Automated Tuning of Accelerator Cavities”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPBA15, pp. 1262-1264.
[n] H. Wang et al., “Test of Magnet Girder Prototypes for HEPS-TF”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2863-2865. doi:10.18429/JACoW-IPAC2018-WEPML075
[n] J. Laskar, L. Nadolski, D. S. Robin, and C. Steier, “Lattice Model Calibration and Frequency Map Measurements at the ALS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP3A15, pp. 1077-1079.
[n] W. Bartmann, C. Bracco, B. Goddard, F. M. Velotti, and J. Wenninger, “LHC Injection Losses and Trajectories During Run 1 and 2 and Outlook to Injection of HL-LHC Beams”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2387-2390. doi:10.18429/JACoW-IPAC2019-WEPMP030
[n] T. T. Yang et al., “On the Mechanical Design of a 1.5 GHz Landau Cavity”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P034, pp. 3054-3056.
[n] Y. Papaphilippou et al., “Experimental Frequency Maps for the ESRF Storage Ring”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT084, pp. 2050-2052.
[n] D. H. Chang, Y. W. Jun, B. H. Oh, and S. J. Hong, “Data Acquisition and Control System for the Prototype KSTAR NB Heating System”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP520, pp. XX-XX.
[n] R. M. Main, M. R. Curtis, R. Grazier, P. B. Kennedy, and D. A. Spence, “A Small Helium-3 Cyclotron”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 733-740.
[n] M. Di Giacomo, “Solid State RF Amplifiers for Accelerator Applications”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU4RAI01, pp. 757-761.
[n] E. Fadakis, N. Bidault, M. L. Lozano Benito, E. Matli, J. A. Rodriguez, and K. S. Seintaridis, “Software Applications for Beam Traceability and Machine Documentation at ISOLDE”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 905-909. doi:10.18429/JACoW-ICALEPCS2017-TUPHA198
[n] Y. Cai et al., “Luminosity Improvement at PEP-II Based on Optics Model and Beam-beam Simulation”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS052, pp. 661-663.
For LaTeX
Use Complete Form
For BibTeX
References
- J. A. Holmes, S. M. Cousineau, T. V. Gorlov, and M. A. Plum, “Injection of a Self-Consistent Beam at the Spallation Neutron Source”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4516-4518.
- K. M. Crowe and R. P. Haddock, “The Effect of Duty Cycle on the Research Potential of Pion Factories”, in Proc. Int. Conf. on Sector-Focused Cyclotrons and Meson Factories (Cyclotrons'63), Geneva, Switzerland, Apr. 1963, paper CYC63D05, pp. XX-XX.
- R. Bingham, “Laboratory Astrophysics Using High Energy Density Photon and Electron Beams”, presented at the 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FOAD003, unpublished.
- R. A. Belshe, V. P. Elischer, and V. Jacobson, “The Feasibility and Advantages of Commercial Process I/O Systems for Accelerator Control”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1036-1042.
- L. Rivkin et al., “Bunch Lengthening in the SLC Damping Ring”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 634-637.
- R. Rimmer, D. A. Goldberg, A. F. Jacob, G. R. Lambertson, and F. Voelker, “Beam Impedance Measurements on the ALS Curved Sector Tank”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1055-1058.
- J. M. Nogiec et al., “A Highly Configurable and Scriptable Software System for Fully Automated Tuning of Accelerator Cavities”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPBA15, pp. 1262-1264.
- H. Wang et al., “Test of Magnet Girder Prototypes for HEPS-TF”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2863-2865.
- J. Laskar, L. Nadolski, D. S. Robin, and C. Steier, “Lattice Model Calibration and Frequency Map Measurements at the ALS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP3A15, pp. 1077-1079.
- W. Bartmann, C. Bracco, B. Goddard, F. M. Velotti, and J. Wenninger, “LHC Injection Losses and Trajectories During Run 1 and 2 and Outlook to Injection of HL-LHC Beams”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2387-2390.
- T. T. Yang et al., “On the Mechanical Design of a 1.5 GHz Landau Cavity”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P034, pp. 3054-3056.
- Y. Papaphilippou et al., “Experimental Frequency Maps for the ESRF Storage Ring”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT084, pp. 2050-2052.
- D. H. Chang, Y. W. Jun, B. H. Oh, and S. J. Hong, “Data Acquisition and Control System for the Prototype KSTAR NB Heating System”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP520, pp. XX-XX.
- R. M. Main, M. R. Curtis, R. Grazier, P. B. Kennedy, and D. A. Spence, “A Small Helium-3 Cyclotron”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 733-740.
- M. Di Giacomo, “Solid State RF Amplifiers for Accelerator Applications”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU4RAI01, pp. 757-761.
- E. Fadakis, N. Bidault, M. L. Lozano Benito, E. Matli, J. A. Rodriguez, and K. S. Seintaridis, “Software Applications for Beam Traceability and Machine Documentation at ISOLDE”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 905-909.
- Y. Cai et al., “Luminosity Improvement at PEP-II Based on Optics Model and Beam-beam Simulation”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS052, pp. 661-663.
Back to search