JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	J. Y. Tang, W. Lei, and Y. F. Wang, “A New Buncher System for SFC”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-26, pp. 265-268. 
[n]	N. Pichoff et al., “Transverse-Profile Equilibrium in a Space-Charge-Dominated Beam”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5E203, pp. 617-619. 
[n]	Y. Irie et al., “Wideband Low-output Impedance RF System for the ISIS Second Harmonic Cavity”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC063, pp. 609-611. 
[n]	B. Koubek, Y. Cuvet, A. Grudiev, C. Rossi, and M. A. Timmins, “Tuning of the CERN 750 MHz RFQ for Medical Applications”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 763-766. doi:10.18429/JACoW-LINAC2016-THOP09
[n]	T. Furuya, Y. Kijima, S. Mitsunobu, T. Tajima, and T. Tanaka, “Input Coupler of the Superconducting Cavity for KEKB”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP1A11, pp. 2040-2042. 
[n]	E. Matias et al., “The Canadian Light Source Control System Lessons Learned From Building a Synchratoron and Beamlines Control System”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_023. 
[n]	C.-Y. Liu, D.-G. Huang, and J. C. Huang, “Optimal Design for Resonant Power Transformer”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD061, pp. 3650-3652. 
[n]	B. W. Wei, “Present Status of HIRFL”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper ABI-03, pp. 23-32. 
[n]	R. D?â, “Bunch Shape Measurements at Injector 2 and Ring Cyclotron”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper MOPD62, pp. 235-239. 
[n]	A. Radeva, J. M. E. Elyn, F. Locci, T. Oulevey, and M. Vanden Eynden, “Selecting a Linux Operating System for CERN Accelerator Controls”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1475-1479. doi:10.18429/JACoW-ICALEPCS2023-THPDP064
[n]	E. Kako et al., “High Power Test of the Prototype Cryomodule for ADS Superconducting Linac”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPT062, pp. 3579-3581. 
[n]	L. Huang, Y. W. An, H. F. Ji, and S. Wang, “The Development of Injection and Extraction Software in the Rapid Cycling Synchrotron”, in Proc. ICAP'15, Shanghai, China, Oct. 2015, pp. 97-99. doi:10.18429/JACoW-ICAP2015-WEP15
[n]	T. Ladzinski et al., “The LHC Access System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP102, pp. 600-602. 
[n]	E. V. Bulyak, J. Urakawa, and F. Zimmermann, “Effect of Transverse Coupling on Asymmetric Cooling in Compton Rings”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWA050, pp. 1823-1825. 
[n]	D. W. Peterson, V. Bharadwaj, J. Klen, R. Pasquinelli, and R. Webber, “An Improved 1.26 MHz System for the Fermilab Antiproton Accummulator”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 237-240. 
[n]	A. Bogdanov et al., “Upgrade of the LENS Proton Linac: Commissioning and Results”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THOAAB02, pp. 2611-2613. 
[n]	N. Barov and J. Rosenzweig, “Propagation of Short Electron Pulses in Underdense Plasmas”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2623-2627. 
[n]	J. Tang et al., “The Role of Laser Shaping in Microbunching Instability Suppression and Seeded X-Ray Free Electron Emission”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 990-992. doi:10.18429/JACoW-NAPAC2019-FRXBA5
[n]	H. Danared, M. Eshraqi, E. Laface, R. Miyamoto, S. Molloy, and A. Ponton, “Computational Challenges in ESS”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper SURDI1, pp. XX-XX. 
[n]	J. D. Gilpatrick et al., “LANSCE Harp Upgrade: Analysis, Design, Fabrication, and Installation”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM014, pp. 132-136. 
[n]	Y. Kim, K. Floettmann, T. Limberg, M. Dohlus, and D. Son, “New Linac Layout for TESLA XFEL Project”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP20012C, pp. XX-XX. 
[n]	Y. S. Wong, J. C. Huang, K.-B. Liu, and W. S. Wen, “Using a High Precision Programmable DC Power Supply of TPS Magnet”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPO012, pp. 3358-3360. 
[n]	W. Qin et al., “Free-Electron Laser Driven by a 500 MeV Laser Plasma Accelerator Beam”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 217-220. doi:10.18429/JACoW-FEL2015-MOP076
[n]	E. A. Knapp, “New Applications of Particle Accelerators in Medicine, Material Sciences, and Industry”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3120-3125. 
[n]	J. P. Wozniak, S. Deghaye, and G. Kruk, “New Wave of Component Reuse with Spring Framework - AP Case Study”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEA004, pp. 367-369. 
[n]	W. C. Sellyey, J. D. Gilpatrick, and R. Senior, “Bench Test of a Residual Gas Ionization Profile Monitor (RGIPM)”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH043, pp. 1318-1320. 
[n]	T. Au, B. Barquest, J. J. Keir, and V. Zvyagintsev, “RF Matching Circuit for CANREB RFQ”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3902-3904. doi:10.18429/JACoW-IPAC2018-THPAL112
[n]	P. J. Chou and A. W. Chao, “Collective Beam Instabilities in the Taiwan Light Source”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH133, pp. 1978-1980. 
[n]	S. Roy Chaudhuri et al., “SKA Monitioring and Control Progress Status”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC100, pp. 340-343. 
[n]	N. Barov, R. H. Miller, and D. J. Newsham, “Construction and Testing of the Dual Slot Resonance Linac”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPSM14, pp. 1415-1417. 
[n]	S. Kahn et al., “Field Quality Aspects of CBA Superconducting Magnets”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3469-3472. 
[n]	J. Keil, H. Ehrlichmann, G. K. Sahoo, and R. Wanzenberg, “Quadrupole Scan Measurements in the Beam Transport Line between DESY II and PETRA III”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 174-176. doi:10.18429/JACoW-IPAC2017-MOPAB041
[n]	T. Watanabe, N. Fukunishi, A. Goto, O. Kamigaito, M. Kase, and Y. Sasaki, “Development of Beam Current Monitor with High Tc SQUID at RIBF”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper WEIANB02, pp. 523-532. 
[n]	J. C. Brown and R. M. Hutcheon, “Design Considerations for a Developmental High Power Coupling Loop to Drive a Resonant Load”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper E11, pp. 180-182. 
[n]	G.-Y. Hsiung et al., “Construction Status of the TPS Vacuum Systems”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI077, pp. 3472-3474. 
[n]	A. A. Garren, “Lattice of the NAL Proton Synchrotron”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 271-277. 
[n]	N. Walker, D. Reschke, J. Schaffran, L. Steder, M. Wenskat, and L. Monaco, “Performance Analysis of the European XFEL SRF Cavities, From Vertical Test to Operation in Modules”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 657-662. doi:10.18429/JACoW-LINAC2016-WE1A04
[n]	M. Gourber-Pace, G. Kruk, and M. Misiowiec, “Status Report of the Measurement Service for the CERN Accelerator Logging”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP106, pp. 325-327. 
[n]	B. Arfin and F. Friedlander, “Study and Design of the NAL Main Ring Accelerator Cavity”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 237-241. 
[n]	M. Yu et al., “Fabrication and Test of Short Helical Solenoid Model Based on YBCO Tape”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP153, pp. 1118-1120. 
[n]	G. Kruk et al., “How to Successfully Renovate a Controls System? - Lessons Learned from the Renovation of the CERN Injectors' Controls Software”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOCOBAB05, pp. 43-46. 
[n]	N. E. Vasyukhin, Y. Senichev, and R. T?Âlle, “The Transverse Nonlinear Tune Shift as Stabilising Factor in Halo Creation in Space Charge Dominated Beam”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAT048, pp. 3004-3006. 
[n]	M. Scheer, “WAVE - A Computer Code for the Tracking of Electrons through Magnetic Fields and the Calculation of Spontaneous Synchrotron Radiation”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper TUACC2, pp. 86-88. 
[n]	S. A. Helus, D. R. Bruce, J. J. Error, J. J. Fazekas, and J. R. Maines, “Optical Tooling and its Uses at the Spallation Neutron Source (SNS)”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE039, pp. 2577-2579. 
[n]	M. Wenskat et al., “Nitrogen Infusion R&D for CW Operation at DESY”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 652-657. doi:10.18429/JACoW-LINAC2018-TH2A01
[n]	T. Tajima, C. Boffo, M. P. Kelly, and J. Mammosser, “Design of a New Electropolishing System for SRF Cavities”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH179, pp. 484-486. 
[n]	J. J. Error, D. R. Bruce, J. J. Fazekas, S. A. Helus, and J. R. Maines, “Deformation Monitoring of the Spallation Neutron Source (SNS) Tunnels”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE037, pp. 2509-2511. 
[n]	H. D. Thomsen and S. P. M?©ller, “The Design of the Fast Raster System for the European Spallation Source”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2118-2120. doi:10.18429/JACoW-IPAC2014-WEPRO072
[n]	Z.-D. Tsai, J.-C. Chang, J.-R. Chen, C. H. Kuo, and J.-M. Lee, “Integrated Control and Archive System for Utility Facility”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP079, pp. XX-XX. 
[n]	S. Assadi et al., “The SNS Laser Profile Monitor Design and Implementation”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPG054, pp. 2706-2708. 
[n]	T. Uesugi et al., “Observation of Quadrupole Mode Frequency and its Connection with Beam Loss”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP139, pp. 1821-1823. 
[n]	J. Bahrdt et al., “Characterization and Implementation of the Cryogenic Permanent Magnet Undulator CPMU17 at Bessy II”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1415-1418. doi:10.18429/JACoW-IPAC2019-TUPGW014
[n]	J. W. McKenzie and B. L. Militsyn, “A Velocity Bunching Scheme for Creating Sub-picosecond Electron Bunches from an RF Photocathode Gun”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC132, pp. 3194-3196. 
[n]	T. Takayanagi et al., “Design of the Pulse Bending Magnet for Switching the Painting Area Between the MLF and MR in J-Parc 3-Gev Rcs”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD085, pp. 3293-3295. 
[n]	C. Fortgang et al., “Longitudinal Beam Dynamics of a 5 MeV DTL - A Comparison of Theory and Experiment”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-48, pp. 167-169. 
[n]	T. Shibata et al., “Phase space measurements of 90 mA and 52.5 keV H⁻ ion beam at J-PARC frontend”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPM082, unpublished. 
[n]	A. Chabert, G. Gendreau, and P. Lapostolle, “Invited Paper: Limited Energy Spread in an SSC”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper F-02, pp. 2306-2311. 
[n]	B. E. Carlsten and P. J. Tallerico, “Self-Consistent Klystron Simulations”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2837-2840. 
[n]	L. Zeng et al., “A Modified Self-Seeded X-ray FEL Scheme Towards Shorter Wavelengths”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 409-411. doi:10.18429/JACoW-FEL2015-TUP023
[n]	R. Amirikas, A. Bertolini, J. Eschke, B. Faatz, and M. Lomperski, “Vibration Stability Studies of a Type III+ XFEL/FLASH Superconducting Accelerating Module Operating at 2K”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper TUPPH078, pp. 421-424. 
[n]	W. Gai et al., “A High Resolution Spatial-temporal Imaging Diagnostic for High Energy Density Physics Experiments”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2819-2821. doi:10.18429/JACoW-IPAC2014-THOAB03
[n]	D. Wang, M. Satoh, and S. Ushimoto, “The Upgrade of Pulsed Magnet Control System Using PXIe Devices at KEK LINAC”, presented at the IPAC'23, Venice, Italy, May 2023, paper THPA025, unpublished. 
[n]	N. Sei, H. Ogawa, K. W. Watanabe, K. Y. Yamada, and M. Y. Yasumoto, “Recent Progress of the NIJI-IV VUV/IR FEL”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THPP012, pp. XX-XX. 
[n]	L. Fernandez et al., “Front-End Software Architecture”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WOPA04, pp. 310-312. 
[n]	C. L. Li, B. C. Jiang, Z. B. Li, M. Z. Zhang, Q. L. Zhang, and W. Z. Zhang, “Vertical Emittance Reduction in the SSRF Phase II Project”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 733-735. doi:10.18429/JACoW-IPAC2017-MOPIK088
[n]	R. Maier et al., “Invited Paper: Commissioning of the Cooler Synchrotron COSY”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper F-01, pp. 338-344. 
[n]	G. Iadarola and G. Rumolo, “Electron Cloud Simulations with PyECLOUD”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper WESAI4, pp. 138-142. 
[n]	Z. F. Seidov, Y. Pinhasi, and A. Yahalom, “ABCD Matrix Method: a Case Study”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUPOS14, pp. XX-XX. 
[n]	G. D. Yendell, U. K. Pedersen, N. Tartoni, S. Williams, A. Greer, and T. C. Nicholls, “Odin - a Control and Data Acquisition Framework for Excalibur 1M and 3M Detectors”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 966-969. doi:10.18429/JACoW-ICALEPCS2017-TUPHA212

For LaTeX

Use Complete Form

For BibTeX

References

Back to search