JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	M. Yamamoto et al., “Longitudinal Beam Dynamics on 3 GeV PS in JAERI-KEK Joint Project”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPLE005, pp. 1073-1075. 
[n]	B. P. Xiao et al., “Cryogenic Test of Double Quarter Wave Crab Cavity for the LHC High Luminosity Upgrade”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3630-3633. doi:10.18429/JACoW-IPAC2015-WEPWI060
[n]	A. Semenov et al., “Schottky Diode Detectors for Monitoring Coherent THz Synchrotron Radiation Pulses”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3465-3467. doi:10.18429/JACoW-IPAC2014-THPME097
[n]	S. De Santis, M. G. Billing, B. T. Carlson, M. A. Palmer, and J. P. Sikora, “TE Wave Measurements of the Electron Cloud in the Cesr-TA Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE088, pp. 1188-1190. 
[n]	J. Snuverink, J. Barranco, H. Garcia, Y. I. Levinsen, D. Schulte, and R. Tomas, “CLIC Final Focus System Alignment and Magnet Tolerances”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPME051, pp. 1682-1684. 
[n]	M. P. Crouch, R. B. Appleby, and B. D. Muratori, “Analytical Approach to the Beam-Beam Interaction with the Hourglass Effect”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 510-513. doi:10.18429/JACoW-IPAC2015-MOPJE082
[n]	K. U. Kasemir and L. R. Dalesio, “Overview of the Experimental Physics and Industrial Control System  Channel Archiver”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP019, pp. XX-XX. 
[n]	S. T. Boogert et al., “Cavity Beam Position Monitor System for ATF2”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE070, pp. 1140-1142. 
[n]	J. A. Crittenden et al., “Investigation into Electron Cloud Effects in the ILC Damping Ring Design”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR063, pp. 1963-1965. 
[n]	S. Molloy and E. Tanke, “DYNAC: Extensions, Updates, and Upgrades”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3784-3786. doi:10.18429/JACoW-IPAC2017-THPAB038
[n]	E. Allaria, G. De Ninno, and W. M. Fawley, “The Second Stage of FERMI@Elettra: A Seeded FEL in the Soft X-ray Spectral Range”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper WEPC53, pp. 631-634. 
[n]	M. Cornacchia, S. Di Mitri, G. Penco, and A. Zholents, “Formation of Electron Bunches for Harmonic Cascade X-ray Free Electron Lasers”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THOPA01, pp. 2738-2740. 
[n]	A. D. Cahill, M. Dal Forno, and V. A. Dolgashev, “TM01 Mode Launcher for Use in High Brightness Photoguns”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 491-493. doi:10.18429/JACoW-IPAC2016-MOPMW039
[n]	S. Guiducci et al., “Updates to the International Linear Collider Damping Rings Baseline Design”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOOCA03, pp. 32-34. 
[n]	C. Montag et al., “RHIC Performance during the 7.5 GeV Low Energy Run in FY 2014”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1087-1089. doi:10.18429/JACoW-IPAC2014-TUPRO031
[n]	V. S. Morozov, Y. S. Derbenev, J. Guo, A. Hutton, and Y. Zhang, “Study of Beam Synchronization at JLEIC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2463-2465. doi:10.18429/JACoW-IPAC2016-WEPMW019
[n]	S. M. Lidia et al., “FRIB Machine Protection System Design and Validation Studies”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 221-225. doi:10.18429/JACoW-IBIC2015-MOPB070
[n]	J. A. Crittenden, M. A. Palmer, and D. L. Rubin, “Wiggler Magnet Design Development for the ILC Damping Rings”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR065, pp. 1969-1971. 
[n]	X. Wu et al., “End-to-end Beam Simulations for the C-ADS Injector II”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWA059, pp. 1838-1840. 
[n]	Y. M. Nosochkov, Y. Cai, F. Lin, V. S. Morozov, and Y. Zhang, “Dynamic Aperture of JLEIC Electron Collider Ring with Errors and Correction”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1920-1923. doi:10.18429/JACoW-IPAC2019-TUPRB113
[n]	C.-K. Min, S. H. Jung, H.-S. Kang, C. Kim, I. S. Ko, and S. J. Park, “RF Timing Distribution and Laser Synchronization Commissioning of PAL-XFEL”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4234-4236. doi:10.18429/JACoW-IPAC2016-THPOY057
[n]	A. Oeftiger, H. Bartosik, A. Findlay, S. Hancock, and G. Rumolo, “Flat Bunches with a Hollow Distribution for Space Charge Mitigation”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 652-655. doi:10.18429/JACoW-IPAC2016-MOPOR023
[n]	M. Benedikt, S. Hancock, and M. Lindroos, “Base Line Design for a Beta-beam Neutrino Facility”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT007, pp. 542-544. 
[n]	M. Schaumann, J. M. Jowett, B. Salvant, M. Wendt, M. Blaskiewicz, and S. Verd??-Andr?®s, “Studies on Stochastic Cooling of Heavy Ions in the LHC”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1030-1032. doi:10.18429/JACoW-IPAC2014-TUPRO013
[n]	D. L. Rubin, “The Challenges of Ultra-low Emittance Damping Rings”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUYB02, pp. 956-960. 
[n]	H. Huang et al., “Overcoming the Horizontal Depolarizing Resonance in the Brookhaven AGS”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2112-2114. doi:10.18429/JACoW-IPAC2014-WEPRO070
[n]	V. Lazarev et al., “Technical Overview of the SIEMENS Particle Therapy Accelerator”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS066, pp. 3577-3579. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search