Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. H. Xu, Z. H. Bai, Z. L. Ren, J. J. Tan, P. H. Yang, and Q. Zhang, “Study of Seven-Bend-Achromat Lattice Option for Half”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3926-3928. doi:10.18429/JACoW-IPAC2021-THPAB073
[n] B. A. Bowling and C. McDowell, “CEBAF Beam Viewer Imaging Software”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2477-2480.
[n] N. Andreev et al., “Performance of Five and Six Block Coil Geometries in Short Superconducting Dipole Models for the LHC”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUAR2, pp. 154-156.
[n] G. Rumolo and D. Schulte, “Fast Ion Instability in the CLIC Transfer Line and Main Linac”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP048, pp. 655-657.
[n] R. Ursic and B. Solar, “FEL and Libera both Push Performance into New Frontiers”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUPOS45, pp. XX-XX.
[n] K. Balewski, “Review of Feedback Systems”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEZ01A, pp. 169-173.
[n] D. Mathisen, “Shot Automation for the National Ignition Facility”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper I2_002.
[n] R. Macek, T. Hardek, T.-S. Wang, and M. Plum, “Beam Pinging, Sweeping, Shaking, and Electron/Ion Collecting, at the Proton Storage Ring”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2319-2322.
[n] P. M. Lapostolle, “On the Design of a High Intensity Proton Linear Accelerator”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 572-577.
[n] K. Balewski, “Progress Report on PETRA III”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS020, pp. 3317-3319.
[n] A. K. Bandyopadhyay, K. Balewski, A. Joestingmeier, A. S. Omar, and R. Wanzenberg, “Wake Computations for the Beam Positioning Monitors of PETRA III”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS023, pp. 3326-3328.
[n] I. Krouptchenkov, A. Brenger, G. Kube, F. Schmidt-F?Âhre, and K. Wittenburg, “Experience with the Commissioning of the Libera Brilliance BPM Electronics at PETRA III”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPD03, pp. 291-293.
[n] L. Bottura et al., “Performance of the 1-m Model of the 6 kA Superconducting Quadrupole for the LHC Insertions”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP1B18, pp. 2145-2147.
[n] P.LaPenna, “The Status of VIRGO”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper O1_001.
[n] T. Fountain, A. McCarthy, and F. Peng, “PCI Express: an Overview of PCI Express, Cabled PCI Express and PXI Express”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper I3_001.
[n] F. Arteche, S. Sanfilippo, A. Siemko, D. Tommasini, I. Vanenkov, and C. Wyss, “Status of the LHC Short Dipole Model Programme”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2A14, pp. 2169-2171.
[n] R. Tikhoplav et al., “Terahertz Camera Development Status”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP050, pp. 4066-4068.
[n] Y. J. Li, K. Balewski, and W. Decking, “Dynamic Aperture Studies for PETRA III”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS021, pp. 3320-3322.
[n] O. A. Anderson et al., “ESQ-Focused 2.5 MeV DC Accelerator for BNCT”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2619-2622.
[n] V. Serriere et al., “352.2 MHz HOM Damped Normal Conducting ESRF Cavity: Design and Fabrication”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC004, pp. 68-70.
[n] R. Larsen et al., “Novel hollow core optical fibre-based radiation sensing technique for medical applications and extreme environments”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 495-499. doi:10.18429/JACoW-IBIC2025-TUPMO14
[n] D. Beltran and J. A. Perlas, “Power Converters for the LLS Synchrotron Accelerator Magnet System”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP25C, pp. 2070-2072.
[n] B. Dehning et al., “Dynamic Beam Based Calibration Of Beam Position Monitors”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP04H, pp. 430-432.
[n] F.J.Busto,F.J.Varas, “Knowledge Enabled Services KES for Decision Support in Control Rooms. CESADS KES Case Study at ESA/ESOC.”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper I5_003.
[n] A. Faltens and C. Kerns, “Fast Beam Choppers for the Electron-Ring Accelerator”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 1059-1061.
[n] H. Liesem, “Resonance Free or Precessional Extraction - A Comparison”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69C08, pp. XX-XX.
[n] G. Biallas, P. Brindza, J. Kirchgessner, and H. L. Phillips, “The CEBAF Cavity Cryostat”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper MO3-14, pp. 73-75.
[n] D. Ressmann, A. Kopmann, V. Mauch, W. Mexner, and A. Vondrous, “Data Management at the Synchrotron Radiation Facility ANKA”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WCO202, pp. 13-15.
[n] B. Frammery, “The LHC Control System”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper I1_001.
[n] G. A. Krafft, D. Douglas, J. Kewisch, M. Bickley, A. Hofler, and B. A. Bowling, “Orbit Correction Implementation at CEBAF”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1895-1898.
[n] H. Boschman et al., “Testing of the Large Bore Single Aperture 1-metre Superconducting Dipoles Made with Phenolic Inserts”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP08H, pp. 2008-2010.
[n] D. Heins, J. Klute, R. D. Kohaupt, K. H. Matthiesen, S. Paetzold, and J. Ruemmler, “The Transverse Damping System with DSP PLL Tune Measurement for HERA p”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP022L, pp. 1857-1859.
[n] A. Friedman et al., “Developing the Physics Design for NDCX-II, a Unique Pulse-Compressing Ion Accelerator”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper TH1IOPK04, pp. 157-162.
[n] A. Smolyakov, E. Mustafin, N. Pyka, and P. J. Spiller, “Radiation Damage Studies for the Slow Extraction from SIS100”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP102, pp. 3602-3604.
[n] G.Chiozzi,A.Caproni,R.Cirami,P.DiMarcantonio,D.Fugate,S.Harrington,B.Jeram,M.Plesko,M.Sekoranja,H.Sommer,K.Zagar, “The ALMA Common Software ACS - Status and Developments”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper I3_003.
For LaTeX
Use Complete Form
For BibTeX
References
- J. H. Xu, Z. H. Bai, Z. L. Ren, J. J. Tan, P. H. Yang, and Q. Zhang, “Study of Seven-Bend-Achromat Lattice Option for Half”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3926-3928.
- B. A. Bowling and C. McDowell, “CEBAF Beam Viewer Imaging Software”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2477-2480.
- N. Andreev et al., “Performance of Five and Six Block Coil Geometries in Short Superconducting Dipole Models for the LHC”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUAR2, pp. 154-156.
- G. Rumolo and D. Schulte, “Fast Ion Instability in the CLIC Transfer Line and Main Linac”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP048, pp. 655-657.
- R. Ursic and B. Solar, “FEL and Libera both Push Performance into New Frontiers”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper TUPOS45, pp. XX-XX.
- K. Balewski, “Review of Feedback Systems”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEZ01A, pp. 169-173.
- D. Mathisen, “Shot Automation for the National Ignition Facility”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper I2_002.
- R. Macek, T. Hardek, T.-S. Wang, and M. Plum, “Beam Pinging, Sweeping, Shaking, and Electron/Ion Collecting, at the Proton Storage Ring”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2319-2322.
- P. M. Lapostolle, “On the Design of a High Intensity Proton Linear Accelerator”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 572-577.
- K. Balewski, “Progress Report on PETRA III”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS020, pp. 3317-3319.
- A. K. Bandyopadhyay, K. Balewski, A. Joestingmeier, A. S. Omar, and R. Wanzenberg, “Wake Computations for the Beam Positioning Monitors of PETRA III”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS023, pp. 3326-3328.
- I. Krouptchenkov, A. Brenger, G. Kube, F. Schmidt-F?Âhre, and K. Wittenburg, “Experience with the Commissioning of the Libera Brilliance BPM Electronics at PETRA III”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUPD03, pp. 291-293.
- L. Bottura et al., “Performance of the 1-m Model of the 6 kA Superconducting Quadrupole for the LHC Insertions”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP1B18, pp. 2145-2147.
- P.LaPenna, “The Status of VIRGO”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper O1_001.
- T. Fountain, A. McCarthy, and F. Peng, “PCI Express: an Overview of PCI Express, Cabled PCI Express and PXI Express”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper I3_001.
- F. Arteche, S. Sanfilippo, A. Siemko, D. Tommasini, I. Vanenkov, and C. Wyss, “Status of the LHC Short Dipole Model Programme”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP2A14, pp. 2169-2171.
- R. Tikhoplav et al., “Terahertz Camera Development Status”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP050, pp. 4066-4068.
- Y. J. Li, K. Balewski, and W. Decking, “Dynamic Aperture Studies for PETRA III”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS021, pp. 3320-3322.
- O. A. Anderson et al., “ESQ-Focused 2.5 MeV DC Accelerator for BNCT”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2619-2622.
- V. Serriere et al., “352.2 MHz HOM Damped Normal Conducting ESRF Cavity: Design and Fabrication”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC004, pp. 68-70.
- R. Larsen et al., “Novel hollow core optical fibre-based radiation sensing technique for medical applications and extreme environments”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 495-499.
- D. Beltran and J. A. Perlas, “Power Converters for the LLS Synchrotron Accelerator Magnet System”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP25C, pp. 2070-2072.
- B. Dehning et al., “Dynamic Beam Based Calibration Of Beam Position Monitors”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP04H, pp. 430-432.
- F.J.Busto,F.J.Varas, “Knowledge Enabled Services KES for Decision Support in Control Rooms. CESADS KES Case Study at ESA/ESOC.”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper I5_003.
- A. Faltens and C. Kerns, “Fast Beam Choppers for the Electron-Ring Accelerator”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 1059-1061.
- H. Liesem, “Resonance Free or Precessional Extraction - A Comparison”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69C08, pp. XX-XX.
- G. Biallas, P. Brindza, J. Kirchgessner, and H. L. Phillips, “The CEBAF Cavity Cryostat”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper MO3-14, pp. 73-75.
- D. Ressmann, A. Kopmann, V. Mauch, W. Mexner, and A. Vondrous, “Data Management at the Synchrotron Radiation Facility ANKA”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper WCO202, pp. 13-15.
- B. Frammery, “The LHC Control System”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper I1_001.
- G. A. Krafft, D. Douglas, J. Kewisch, M. Bickley, A. Hofler, and B. A. Bowling, “Orbit Correction Implementation at CEBAF”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1895-1898.
- H. Boschman et al., “Testing of the Large Bore Single Aperture 1-metre Superconducting Dipoles Made with Phenolic Inserts”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP08H, pp. 2008-2010.
- D. Heins, J. Klute, R. D. Kohaupt, K. H. Matthiesen, S. Paetzold, and J. Ruemmler, “The Transverse Damping System with DSP PLL Tune Measurement for HERA p”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP022L, pp. 1857-1859.
- A. Friedman et al., “Developing the Physics Design for NDCX-II, a Unique Pulse-Compressing Ion Accelerator”, in Proc. 10th Int. Computational Accelerator Physics Conf. (ICAP'09), San Francisco, CA, USA, Aug.-Sep. 2009, paper TH1IOPK04, pp. 157-162.
- A. Smolyakov, E. Mustafin, N. Pyka, and P. J. Spiller, “Radiation Damage Studies for the Slow Extraction from SIS100”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP102, pp. 3602-3604.
- G.Chiozzi,A.Caproni,R.Cirami,P.DiMarcantonio,D.Fugate,S.Harrington,B.Jeram,M.Plesko,M.Sekoranja,H.Sommer,K.Zagar, “The ALMA Common Software ACS - Status and Developments”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper I3_003.
Back to search