Favourites
For Word
[n] A. Xiao et al., “The Intermediate-Energy X-ray (IEX) Undulator Commissioning Results”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPSM11, pp. 1070-1072.
[n] S. Eckhouse, E. Chu, and M. Montgomery, “Scaling Laws and Optimization of Electron Linear Induction Accelerators”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 911-914.
[n] S. Dewan, R. Holmes, K. Reiniger, F. V?Âlker, and J. Zeng, “High Power Switch-mode Power Converters for the 1.4 GeV PS-Booster Beam Transfer Lines at CERN”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THOAF102, pp. 333-335.
[n] Y. Hayashi et al., “TWT Amplifier using a Ferroelectric Cathode for Electron Beam Generation”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA90, pp. 3606-3608.
[n] Y. Lee, E.-S. Kim, G. Hahn, and Z. Li, “Design Study and Multi-particle Tracking Simulation of the IH-DTL with KONUS Beam Dynamics for KHIMA Project”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3299-3301. doi:10.18429/JACoW-IPAC2016-THPMB032
[n] J. H. Kelly, “DMM Thermal Mechanical Design”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 152-155. doi:10.18429/JACoW-MEDSI2016-TUPE01
[n] K. K. Pant, B. Biswas, S. Krishnagopal, and S. Chouksey, “Fabrication and RF Studies on A Prototype PWT Linac Structure”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU402, pp. 302-304.
[n] V. Variale et al., “First Test of the Charge State Breeder BRIC”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB013, pp. 3318-3320.
[n] H. Pines and F. Selph, “Automatic Tuning of the LBL Bevalac Transfer Line”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2165-2168.
[n] J. Li, Y. Liu, X. Qi, and W. Q. Zhang, “Design of Digital Controller for Multi Module Series-parallel Accelerator Power Supply”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1288-1290. doi:10.18429/JACoW-IPAC2019-TUPMP023
[n] L. Muguira et al., “Automatic Tuner Unit Design, Simulation and Measurement for Automatic Operation of the RF System in the ESS-Bilbao H+ Ion Source”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS023, pp. 3469-3471.
[n] M. Khojoyan et al., “Beam Dynamics Studies for Particle Driven Plasma Wakefield Acceleration Experiments at PITZ”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper THP08, pp. 236-238.
[n] A. H. Botha et al., “A New Multidisciplinary Separated-Sector Cyclotron Facility”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1118-1121.
[n] J.-L. Revol et al., “Highlights of Accelerator Activities in France on behalf of the Accelerator Division of the French Physics Society”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEA048, pp. 181-183.
For LaTeX
Use Complete Form
For BibTeX
References
- A. Xiao et al., “The Intermediate-Energy X-ray (IEX) Undulator Commissioning Results”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPSM11, pp. 1070-1072.
- S. Eckhouse, E. Chu, and M. Montgomery, “Scaling Laws and Optimization of Electron Linear Induction Accelerators”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 911-914.
- S. Dewan, R. Holmes, K. Reiniger, F. V?Âlker, and J. Zeng, “High Power Switch-mode Power Converters for the 1.4 GeV PS-Booster Beam Transfer Lines at CERN”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THOAF102, pp. 333-335.
- Y. Hayashi et al., “TWT Amplifier using a Ferroelectric Cathode for Electron Beam Generation”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA90, pp. 3606-3608.
- Y. Lee, E.-S. Kim, G. Hahn, and Z. Li, “Design Study and Multi-particle Tracking Simulation of the IH-DTL with KONUS Beam Dynamics for KHIMA Project”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3299-3301.
- J. H. Kelly, “DMM Thermal Mechanical Design”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 152-155.
- K. K. Pant, B. Biswas, S. Krishnagopal, and S. Chouksey, “Fabrication and RF Studies on A Prototype PWT Linac Structure”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU402, pp. 302-304.
- V. Variale et al., “First Test of the Charge State Breeder BRIC”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAB013, pp. 3318-3320.
- H. Pines and F. Selph, “Automatic Tuning of the LBL Bevalac Transfer Line”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2165-2168.
- J. Li, Y. Liu, X. Qi, and W. Q. Zhang, “Design of Digital Controller for Multi Module Series-parallel Accelerator Power Supply”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1288-1290.
- L. Muguira et al., “Automatic Tuner Unit Design, Simulation and Measurement for Automatic Operation of the RF System in the ESS-Bilbao H+ Ion Source”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS023, pp. 3469-3471.
- M. Khojoyan et al., “Beam Dynamics Studies for Particle Driven Plasma Wakefield Acceleration Experiments at PITZ”, in Proc. 11th Int. Computational Accelerator Physics Conf. (ICAP'12), Rostock-Warnemunde, Germany, Aug. 2012, paper THP08, pp. 236-238.
- A. H. Botha et al., “A New Multidisciplinary Separated-Sector Cyclotron Facility”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1118-1121.
- J.-L. Revol et al., “Highlights of Accelerator Activities in France on behalf of the Accelerator Division of the French Physics Society”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEA048, pp. 181-183.
Back to search
