Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] W. H. Hwang et al., “High Power RF Performance Test of an Improved SiC Load”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D022, pp. 133-135.
[n] G. Baribaud et al., “Conversion of the CERN PS Booster Controls: Local Hardware Test and Accelerator Study Facilities”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2249-2252.
[n] C. Benvenuti, S. Calatroni, M. Hauer, G. Orlandi, and F. Scalambrin, “Niobium Coatings for 1.5 GHz RF Cavities”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I15, pp. XX-XX.
[n] E. Ahmadi, S. Ahmadiannamin, J. Rahighi, and S. M. Jazayeri, “Evaluation of Collective Effects in Iranian Light Source Facility (ILSF) Storage Ring”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4650-4652. doi:10.18429/JACoW-IPAC2017-THPVA084
[n] D. C. Plostinar, R. Enparantza, and M. Larrañaga, “Design Optimisation of the Re-bunching Cavities for the Front End Test Stand at RAL”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper MOP080, pp. 238-240.
[n] N. Yu. Kazarinov, I. A. Ivanenko, and F. R. Osswald, “Axial Injection Channel of IPHC Cyclotron TR24 and Possibility of Ion Beam Bunching”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 224-226. doi:10.18429/JACoW-Cyclotrons2016-TUP26
[n] R. G. Schonberg et al., “Portable X-Band Linear Accelerator Systems”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3234-3237.
[n] J. Spanggaard et al., “Measurement of Vertical Emittance at LEP from Hard X-Rays”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2492-2495.
[n] A. N. Payne, “System Modeling for the Longitudinal Beam Dynamics Control Problem in Heavy Ion Induction Accelerators”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 736-739.
[n] H. W. Atherton et al., “Contamination of Nuclear Fragments in a 200 GEV per Nucleon Oxygen Ion Beam at CERN”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1752-1755.
[n] T. Henderson et al., “Design of the PEP-II Low-Energy Ring Arc Magnets”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAP01, pp. 1322-1324.
[n] J. L. Conradie et al., “Status Report and New Developments at iThemba LABS”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper MOPPT032, pp. 94-96.
[n] P. Chevtsov, V. Vrankovic, and Ch. S. Wouters, “Advanced Process Control Tool for Magnet Measurements at PSI”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1934-1937. doi:10.18429/JACoW-ICALEPCS2017-THPHA211
[n] R. J. Weggel et al., “Open Midplane Dipoles for a Muon Collider”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP177, pp. 1160-1162.
[n] T. Aniel and F. Meot, “Non-linear Tuning and Halo Transport in Beam Expanders”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP074L, pp. 1233-1235.
[n] Q. Luo and D. R. Xu, “Progress on Preliminary Conceptual Study of HIEPA, a Super Tau-Charm Factory in China”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 422-424. doi:10.18429/JACoW-IPAC2018-MOPML013
[n] J. A. Diaz Cruz et al., “Machine Learning Training for HOM reduction and Emittance Preservation in a TESLA-type Cryomodule at FAST”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 916-919. doi:10.18429/JACoW-IPAC2021-MOPAB289
[n] G. Ciavola, S. Gammino, M. Castro, L. Celona, F. Chines, and S. Marletta, “Frequency Upgrading of the Superconducting ECR Ion Source SERSE”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MODR3, pp. 97-99.
[n] A. Bechtold et al., “Beam Measurements at the ECR-RFQ System for Materials Research with Highly Charged Ions”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP065G, pp. 777-779.
[n] L. E. Ahle et al., “Initial Experiments of RF Gas Plasma Source for Heavy Ion Fusion”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FOAC005, pp. 726-728.
[n] W. E. Cooper et al., “Cryogenic System for Production Testing and Measurement of Fermilab Energy Saver Superconducting Magnets”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3602-3605.
[n] S. A. Kahn et al., “Incorporating RF into a Muon Helical Cooling Channel”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE072, pp. 3509-3511.
[n] X. C. Lai, H. Hao, H. Q. Huang, W. W. Li, X. Q. Wang, and D. R. Xu, “A Concept Design of a Compton Scattering Light Source based on the HLS Electron Storage Ring”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP013, pp. 835-837.
[n] K. Ahammed, A. Carpenter, C. Tennant, J. Li, and R. Suleiman, “Transfer learning for field emission mitigation in CEBAF SRF cavities”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 160-163. doi:10.18429/JACoW-IPAC2024-MOPC44
[n] K. Johnsen, “New Proposed Accelerator Facilities in Western Europe”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1941-1948.
[n] A. Y. Zelinsky et al., “Progress in Development of Kharkov X-Ray Generator”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS075, pp. 3457-3459.
[n] S. L. Bogomolov et al., “Development of Compact 2.45 GHz ECR Ion Source for Generation of Singly-Charged Ions”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 202-206. doi:10.18429/JACoW-ECRIS2018-THC4
[n] E. J. Prebys et al., “Increasing the Intensity of the Fermilab Booster”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAG022, pp. 2936-2938.
[n] D. A. Edwards and M. J. Syphers, “Review of Beam Dynamics Experiments and Issues in Large Colliders”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1414-1419.
[n] S. A. Artamonov, A. N. Chernov, E. M. Ivanov, and G. A. Riabov, “Highly Accurate 3D Modeling of the C-80 Isochronous Cyclotron Magnetic Structure”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEPPC015, pp. 475-477.
[n] Y. J. Li, K. Balewski, and W. Decking, “Dynamic Aperture Studies for PETRA III”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS021, pp. 3320-3322.
[n] L. P. Bellier, J. N. Jacquemier, L. Soby, and S. Deghaye, “CTF3 Beam Position Monitor Acquisition System”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPB01, pp. 395-397.
[n] P. Leban, C. Pradervand, and D. T. Tinta, “Photon Beam Position Measurements using CVD Diamond based Beam Position Sensor and Libera Photon at Swiss Light Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE047, pp. 1077-1079.
[n] A. M. Sessler, W. M. Fawley, and E. T. Scharlemann, “Coherence and Linewidth Studies of a 4-nm High Power FEL”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1530-1533.
[n] W. R. Smythe, C. C. Friedrichs, and L. S. Walling, “Proton Synchrotron RF Cavity Mode Damper Tests”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 643-646.
[n] C. Benvenuti et al., “Magnetic Flux Trapping in Superconducting Niobium”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97B05, pp. 331-336.
[n] J.-F. Liu et al., “RF Surface Resistance of Copper-on-Beryllium at Cryogenic Temperatures Measured by a 22-GHz Demountable Cavity”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAB020, pp. 2083-2085.
[n] T. Roggen, H. De Gersem, B. Masschaele, W. Ackermann, S. Franke, and T. Weiland, “Implementing New Beam Line Elements into a Moment Method Beam Dynamics Code”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper TUADC3, pp. 104-106.
[n] E. Jones, M. S. McAshan, and L. R. Suelzle, “Report on Performance of the Superconducting Injector for the Stanford Linear Accelerator”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 1000-1004.
For LaTeX
Use Complete Form
For BibTeX
References
- W. H. Hwang et al., “High Power RF Performance Test of an Improved SiC Load”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D022, pp. 133-135.
- G. Baribaud et al., “Conversion of the CERN PS Booster Controls: Local Hardware Test and Accelerator Study Facilities”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2249-2252.
- C. Benvenuti, S. Calatroni, M. Hauer, G. Orlandi, and F. Scalambrin, “Niobium Coatings for 1.5 GHz RF Cavities”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93I15, pp. XX-XX.
- E. Ahmadi, S. Ahmadiannamin, J. Rahighi, and S. M. Jazayeri, “Evaluation of Collective Effects in Iranian Light Source Facility (ILSF) Storage Ring”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4650-4652.
- D. C. Plostinar, R. Enparantza, and M. Larrañaga, “Design Optimisation of the Re-bunching Cavities for the Front End Test Stand at RAL”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper MOP080, pp. 238-240.
- N. Yu. Kazarinov, I. A. Ivanenko, and F. R. Osswald, “Axial Injection Channel of IPHC Cyclotron TR24 and Possibility of Ion Beam Bunching”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 224-226.
- R. G. Schonberg et al., “Portable X-Band Linear Accelerator Systems”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3234-3237.
- J. Spanggaard et al., “Measurement of Vertical Emittance at LEP from Hard X-Rays”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2492-2495.
- A. N. Payne, “System Modeling for the Longitudinal Beam Dynamics Control Problem in Heavy Ion Induction Accelerators”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 736-739.
- H. W. Atherton et al., “Contamination of Nuclear Fragments in a 200 GEV per Nucleon Oxygen Ion Beam at CERN”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1752-1755.
- T. Henderson et al., “Design of the PEP-II Low-Energy Ring Arc Magnets”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper FAP01, pp. 1322-1324.
- J. L. Conradie et al., “Status Report and New Developments at iThemba LABS”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper MOPPT032, pp. 94-96.
- P. Chevtsov, V. Vrankovic, and Ch. S. Wouters, “Advanced Process Control Tool for Magnet Measurements at PSI”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1934-1937.
- R. J. Weggel et al., “Open Midplane Dipoles for a Muon Collider”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP177, pp. 1160-1162.
- T. Aniel and F. Meot, “Non-linear Tuning and Halo Transport in Beam Expanders”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP074L, pp. 1233-1235.
- Q. Luo and D. R. Xu, “Progress on Preliminary Conceptual Study of HIEPA, a Super Tau-Charm Factory in China”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 422-424.
- J. A. Diaz Cruz et al., “Machine Learning Training for HOM reduction and Emittance Preservation in a TESLA-type Cryomodule at FAST”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 916-919.
- G. Ciavola, S. Gammino, M. Castro, L. Celona, F. Chines, and S. Marletta, “Frequency Upgrading of the Superconducting ECR Ion Source SERSE”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MODR3, pp. 97-99.
- A. Bechtold et al., “Beam Measurements at the ECR-RFQ System for Materials Research with Highly Charged Ions”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP065G, pp. 777-779.
- L. E. Ahle et al., “Initial Experiments of RF Gas Plasma Source for Heavy Ion Fusion”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FOAC005, pp. 726-728.
- W. E. Cooper et al., “Cryogenic System for Production Testing and Measurement of Fermilab Energy Saver Superconducting Magnets”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3602-3605.
- S. A. Kahn et al., “Incorporating RF into a Muon Helical Cooling Channel”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE072, pp. 3509-3511.
- X. C. Lai, H. Hao, H. Q. Huang, W. W. Li, X. Q. Wang, and D. R. Xu, “A Concept Design of a Compton Scattering Light Source based on the HLS Electron Storage Ring”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP013, pp. 835-837.
- K. Ahammed, A. Carpenter, C. Tennant, J. Li, and R. Suleiman, “Transfer learning for field emission mitigation in CEBAF SRF cavities”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPC44, pp. 160-163.
- K. Johnsen, “New Proposed Accelerator Facilities in Western Europe”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1941-1948.
- A. Y. Zelinsky et al., “Progress in Development of Kharkov X-Ray Generator”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS075, pp. 3457-3459.
- S. L. Bogomolov et al., “Development of Compact 2.45 GHz ECR Ion Source for Generation of Singly-Charged Ions”, in Proc. 23th International Workshop on ECR Ion Sources (ECRIS'18), Catania, Italy, Sep. 2018, pp. 202-206.
- E. J. Prebys et al., “Increasing the Intensity of the Fermilab Booster”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAG022, pp. 2936-2938.
- D. A. Edwards and M. J. Syphers, “Review of Beam Dynamics Experiments and Issues in Large Colliders”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1414-1419.
- S. A. Artamonov, A. N. Chernov, E. M. Ivanov, and G. A. Riabov, “Highly Accurate 3D Modeling of the C-80 Isochronous Cyclotron Magnetic Structure”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper WEPPC015, pp. 475-477.
- Y. J. Li, K. Balewski, and W. Decking, “Dynamic Aperture Studies for PETRA III”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS021, pp. 3320-3322.
- L. P. Bellier, J. N. Jacquemier, L. Soby, and S. Deghaye, “CTF3 Beam Position Monitor Acquisition System”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WPPB01, pp. 395-397.
- P. Leban, C. Pradervand, and D. T. Tinta, “Photon Beam Position Measurements using CVD Diamond based Beam Position Sensor and Libera Photon at Swiss Light Source”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE047, pp. 1077-1079.
- A. M. Sessler, W. M. Fawley, and E. T. Scharlemann, “Coherence and Linewidth Studies of a 4-nm High Power FEL”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1530-1533.
- W. R. Smythe, C. C. Friedrichs, and L. S. Walling, “Proton Synchrotron RF Cavity Mode Damper Tests”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 643-646.
- C. Benvenuti et al., “Magnetic Flux Trapping in Superconducting Niobium”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97B05, pp. 331-336.
- J.-F. Liu et al., “RF Surface Resistance of Copper-on-Beryllium at Cryogenic Temperatures Measured by a 22-GHz Demountable Cavity”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPAB020, pp. 2083-2085.
- T. Roggen, H. De Gersem, B. Masschaele, W. Ackermann, S. Franke, and T. Weiland, “Implementing New Beam Line Elements into a Moment Method Beam Dynamics Code”, in Proc. 11th Int. Computational Accelerator Physics Conf. (ICAP'12), Rostock-Warnemunde, Germany, Aug. 2012, paper TUADC3, pp. 104-106.
- E. Jones, M. S. McAshan, and L. R. Suelzle, “Report on Performance of the Superconducting Injector for the Stanford Linear Accelerator”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 1000-1004.
Back to search