Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Valishev, X. Gu, R. Miyamoto, S. M. White, J. Qiang, and F. Schmidt, “Tevatron End-of-Run Beam Physics Experiments”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEOBA02, pp. 2128-2130.
[n] F. Alessandria et al., “Status Report on the Heavy Ion Facility at LNS”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper I-18, pp. 90-94.
[n] N. I. Balalykin and A. B. Kuznetsov, “Opportunity of Development of Niobium Coated Copper Cavity”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP03K, pp. 1837-1839.
[n] G. Huang, W.-H. Huang, J. Q. Wang, S. Zheng, and D. M. Zhou, “Development of Longitudinal Coupling Impedance Measurement Platform for BEPCII”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPP026, pp. 1940-1942.
[n] M. A. Clarke-Gayther, “The Development of a Slow-Wave Chopper Structure for Next Generation High Power Proton Drivers”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP063, pp. 1690-1692.
[n] E. R. Moog, M. Abliz, R. J. Dejus, J. H. Grimmer, and M. S. Jaski, “Design of a 17.2-mm-Period Planar Undulator for the APS”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPSM10, pp. 1067-1069.
[n] T. H. Harutunyan, E. D. Gazazyan, and M. K. Khojoyan, “The Strict Solution of a Radiation Problem in Toroidal Cavity”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS001, pp. 3260-3262.
[n] J. H. Han et al., “Injector Design for PAL-XFEL Project”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP060, pp. 1732-1734.
[n] A. Ghigo, Yu. A. Svistunov, and M. F. Vorogushin, “Safe Atomic Energetical Installation with Ion Linac”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP43G, pp. 2407-2412.
[n] Y. P. Sun and M. Borland, “Optimizations of Nonlinear Beam Dynamics Performance on APS-U Lattice”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1276-1279. doi:10.18429/JACoW-IPAC2018-TUPMF013
[n] S. Mazzoni et al., “A New Luminosity Monitor for the LHC Run 3”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 163-167. doi:10.18429/JACoW-IBIC2022-MOP45
[n] J. Urbin and R. D. Nolte, “Large Helium Refrigeration Plant Operating Experience”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THICKI03, pp. 2700-2700.
[n] A. V. Philippov, O. S. Kozlov, A. B. Kuznetsov, A. Tuzikov, and I. N. Meshkov, “Effect of Gold Nuclei Recombination in Electron Cooling System on Beam Lifetime in the NICA Collider”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper TUPPB002, pp. 307-309.
[n] M. Syha, H. H?ñhnel, U. Ratzinger, and M. Schuett, “New Beam Dynamics Simulations for the FAIR p-Linac RFQ”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 921-924. doi:10.18429/JACoW-IPAC2019-MOPTS032
[n] P. Lapostolle, E. Tanke, and S. Valero, “New General Beam Dynamics Formulation for the Program DYNAC”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-64, pp. 790-792.
[n] W. J. Leonhardt, “A Radiation Hard Dipole Magnet Coils Using Aluminum Clad Copper Conductors”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 366-369.
[n] Y. P. Sun, “Multi-Objective Online Optimization of Beam Lifetime at APS”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 913-915. doi:10.18429/JACoW-NAPAC2016-WEPOB12
[n] A. Kotanjyan and A. A. Saharian, “Undulator Radiation Inside a Dielectric Waveguide”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper TUSCC3, pp. 96-98.
[n] L. Lin and L. Jahnel, “The Dynamic Aperture of the LNLS UVX2 Electron Storage Ring”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 673-676.
[n] D. Belver et al., “Overview of the ESS-Bilbao Mobile Diagnostics Test Stand”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPC03, pp. 45-48.
[n] E. Esarey et al., “All-Optical Accelerator Experiments at LBNL”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TH201, pp. 701-705.
[n] Y. Kim, K. Floettmann, T. Limberg, M. Dohlus, and D. Son, “New Linac Layout for TESLA XFEL Project”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP20012C, pp. XX-XX.
[n] W. Kang, Y. Hao, L. H. Huo, J. X. Song, and L. Wang, “Development of a Prototype Kicker Magnet for CSNS/RCS Extraction”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP069, pp. 1708-1710.
[n] J. X. Song, Y. Hao, L. H. Huo, W. Kang, and L. Wang, “Development of a Prototype Bump Magnet for CSNS/RCS Injection”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP071, pp. 1714-1716.
[n] C. C. Jensen, “Extraction Kicker Pulser Design for Main Injector”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP078, pp. 1732-1732.
For LaTeX
Use Complete Form
For BibTeX
References
- A. Valishev, X. Gu, R. Miyamoto, S. M. White, J. Qiang, and F. Schmidt, “Tevatron End-of-Run Beam Physics Experiments”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEOBA02, pp. 2128-2130.
- F. Alessandria et al., “Status Report on the Heavy Ion Facility at LNS”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper I-18, pp. 90-94.
- N. I. Balalykin and A. B. Kuznetsov, “Opportunity of Development of Niobium Coated Copper Cavity”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP03K, pp. 1837-1839.
- G. Huang, W.-H. Huang, J. Q. Wang, S. Zheng, and D. M. Zhou, “Development of Longitudinal Coupling Impedance Measurement Platform for BEPCII”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPP026, pp. 1940-1942.
- M. A. Clarke-Gayther, “The Development of a Slow-Wave Chopper Structure for Next Generation High Power Proton Drivers”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP063, pp. 1690-1692.
- E. R. Moog, M. Abliz, R. J. Dejus, J. H. Grimmer, and M. S. Jaski, “Design of a 17.2-mm-Period Planar Undulator for the APS”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPSM10, pp. 1067-1069.
- T. H. Harutunyan, E. D. Gazazyan, and M. K. Khojoyan, “The Strict Solution of a Radiation Problem in Toroidal Cavity”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS001, pp. 3260-3262.
- J. H. Han et al., “Injector Design for PAL-XFEL Project”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPP060, pp. 1732-1734.
- A. Ghigo, Yu. A. Svistunov, and M. F. Vorogushin, “Safe Atomic Energetical Installation with Ion Linac”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP43G, pp. 2407-2412.
- Y. P. Sun and M. Borland, “Optimizations of Nonlinear Beam Dynamics Performance on APS-U Lattice”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1276-1279.
- S. Mazzoni et al., “A New Luminosity Monitor for the LHC Run 3”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 163-167.
- J. Urbin and R. D. Nolte, “Large Helium Refrigeration Plant Operating Experience”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THICKI03, pp. 2700-2700.
- A. V. Philippov, O. S. Kozlov, A. B. Kuznetsov, A. Tuzikov, and I. N. Meshkov, “Effect of Gold Nuclei Recombination in Electron Cooling System on Beam Lifetime in the NICA Collider”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper TUPPB002, pp. 307-309.
- M. Syha, H. H?ñhnel, U. Ratzinger, and M. Schuett, “New Beam Dynamics Simulations for the FAIR p-Linac RFQ”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 921-924.
- P. Lapostolle, E. Tanke, and S. Valero, “New General Beam Dynamics Formulation for the Program DYNAC”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-64, pp. 790-792.
- W. J. Leonhardt, “A Radiation Hard Dipole Magnet Coils Using Aluminum Clad Copper Conductors”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 366-369.
- Y. P. Sun, “Multi-Objective Online Optimization of Beam Lifetime at APS”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 913-915.
- A. Kotanjyan and A. A. Saharian, “Undulator Radiation Inside a Dielectric Waveguide”, in Proc. 11th Int. Computational Accelerator Physics Conf. (ICAP'12), Rostock-Warnemunde, Germany, Aug. 2012, paper TUSCC3, pp. 96-98.
- L. Lin and L. Jahnel, “The Dynamic Aperture of the LNLS UVX2 Electron Storage Ring”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 673-676.
- D. Belver et al., “Overview of the ESS-Bilbao Mobile Diagnostics Test Stand”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPC03, pp. 45-48.
- E. Esarey et al., “All-Optical Accelerator Experiments at LBNL”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper TH201, pp. 701-705.
- Y. Kim, K. Floettmann, T. Limberg, M. Dohlus, and D. Son, “New Linac Layout for TESLA XFEL Project”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP20012C, pp. XX-XX.
- W. Kang, Y. Hao, L. H. Huo, J. X. Song, and L. Wang, “Development of a Prototype Kicker Magnet for CSNS/RCS Extraction”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP069, pp. 1708-1710.
- J. X. Song, Y. Hao, L. H. Huo, W. Kang, and L. Wang, “Development of a Prototype Bump Magnet for CSNS/RCS Injection”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP071, pp. 1714-1716.
- C. C. Jensen, “Extraction Kicker Pulser Design for Main Injector”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP078, pp. 1732-1732.
Back to search