Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Badier et al., “The commissioning of the LEP Polarimeter”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1213-1216.
[n] K. Yoshimura et al., “Measurements of Proton Beam Extinction at J-PARC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE013, pp. 984-986.
[n] K. Katagiri et al., “Design of Beam Transport Lines for Radioisotope Production Systems in NIRS Cyclotron Facility”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2162-2164. doi:10.18429/JACoW-IPAC2014-WEPRO088
[n] K. Umemori et al., “Comparison of Cavity Fabrication and Performances Between Fine Grains, Large Grains and Seamless Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THAA04, pp. 1006-1011.
[n] J. P. Duris, R. K. Li, P. Musumeci, and E. W. Threlkeld, “High Capture Low Energy Spread Inverse Free Electron Laser Accelerator”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPMA16, pp. 619-621.
[n] P. C. Chiu et al., “Control Environment of Power Supply for TPS Booster Synchrotron”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3174-3176. doi:10.18429/JACoW-IPAC2014-THPRO121
[n] L. J. Mao et al., “Experimental Demonstration of Electron Cooling with Bunched Electron Beam”, in Proc. COOL'17, Bonn, Germany, Sep. 2017, pp. 61-63. doi:10.18429/JACoW-COOL2017-TUP15
[n] M. Kosovsky, N. Kurita, A. Novokhatski, J. Seeman, and S. P. Weathersby, “A new HOM Water Cooled Absorber for the PEP-II B-factory Low Energy Ring”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS008, pp. 1499-1501.
[n] D. C. Larbalestier, P. J. Lee, and W. Starch, “Limitation of Critical Current Density by Intermetallic Formation in Fine Filament Nb-Ti Superconductors”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3743-3746.
[n] D. V. Neuffer and A. Liu, “Stochastic Injection Scenarios and Performance for NuSTORM”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPFI055, pp. 1469-1471.
[n] P. Tenenbaum, L. Eriksson, T. Markiewicz, T. O. Raubenheimer, and A. Ringwall, “New Developments in the Next Linear Collider Beam Delivery System Design”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA32, pp. 3462-3464.
[n] M. Torikoshi et al., “Development of Superconducting Wiggler at NIRS”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPLE002, pp. 2442-2444.
[n] S. F. Xu, X. Y. He, P. Wang, W. Wang, and Q. Y. Yao, “Analysis of Tidal Effects on Measurement Accuracy of HLS”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPME027, pp. 2989-2991.
[n] S. M. Pattalwar et al., “Conceptual Design of a Cryomodule for Compact Crab Cavities for Hi-Lumi LHC”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOP087, pp. 353-356.
[n] R. Kazimi, J. Hansknecht, M. Spata, and H. Wang, “Source and Extraction for Simultaneous Four-hall Beam Delivery System at CEBAF”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI085, pp. 2896-2898.
[n] K. Mizushima et al., “Reliable Beam-Intensity Control Technique at the HIMAC Synchrotron”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOPA37, pp. 143-145.
[n] K. Fuchsberger and Y. I. Levinsen, “PYMAD – Integration of MADX in PYTHON”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC119, pp. 2289-2291.
[n] Y.-H. Liu et al., “TPS SR Kicker Prototype Installation Status”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC147, pp. 3230-3232.
[n] A. Andersson, “Phase Detection Electronics for CLIC”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC134, pp. 1338-1340.
[n] M. E. Angoletta et al., “Operation and New Capabilities of CERN's Digital LLRF Family for Injectors”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4178-4181. doi:10.18429/JACoW-IPAC2023-THPA094
[n] Y. Hao, “Computation Requirement Towards the Future Electron Ion Collider, eRHIC”, in Proc. ICAP'15, Shanghai, China, Oct. 2015, pp. XX-XX. doi:10.18429/JACoW-ICAP2015-MOBJI3
[n] D. R. Grosso, R. Cimino, M. Commisso, R. Flammini, R. Larciprete, and R. Wanzenberg, “SEY of Al Samples from the Dipole Chamber of PETRA III at DESY”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS009, pp. 1533-1535.
[n] C. H. Yu et al., “BEPCII Performance and Beam Dynamics Studies on Luminosity”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1014-1018. doi:10.18429/JACoW-IPAC2016-TUYA01
[n] Y. J. Pei et al., “A Low Cost and High Efficient Facility for Removal of SO2 and NOx in the Flue Gas from Coal Fire Power Plant”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FOAA011, pp. 660-662.
[n] N. Sunilkumar, G. L. Gassner, J. A. Safranek, and Y. T. Yan, “Characterization of Slow Orbit Motion in the SPEAR3”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE097, pp. 1215-1217.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Badier et al., “The commissioning of the LEP Polarimeter”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1213-1216.
- K. Yoshimura et al., “Measurements of Proton Beam Extinction at J-PARC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE013, pp. 984-986.
- K. Katagiri et al., “Design of Beam Transport Lines for Radioisotope Production Systems in NIRS Cyclotron Facility”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2162-2164.
- K. Umemori et al., “Comparison of Cavity Fabrication and Performances Between Fine Grains, Large Grains and Seamless Cavities”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THAA04, pp. 1006-1011.
- J. P. Duris, R. K. Li, P. Musumeci, and E. W. Threlkeld, “High Capture Low Energy Spread Inverse Free Electron Laser Accelerator”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUPMA16, pp. 619-621.
- P. C. Chiu et al., “Control Environment of Power Supply for TPS Booster Synchrotron”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3174-3176.
- L. J. Mao et al., “Experimental Demonstration of Electron Cooling with Bunched Electron Beam”, in Proc. 11th Workshop on Beam Cooling and Related Topics (COOL'17), Bonn, Germany, Sep. 2017, pp. 61-63.
- M. Kosovsky, N. Kurita, A. Novokhatski, J. Seeman, and S. P. Weathersby, “A new HOM Water Cooled Absorber for the PEP-II B-factory Low Energy Ring”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS008, pp. 1499-1501.
- D. C. Larbalestier, P. J. Lee, and W. Starch, “Limitation of Critical Current Density by Intermetallic Formation in Fine Filament Nb-Ti Superconductors”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3743-3746.
- D. V. Neuffer and A. Liu, “Stochastic Injection Scenarios and Performance for NuSTORM”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPFI055, pp. 1469-1471.
- P. Tenenbaum, L. Eriksson, T. Markiewicz, T. O. Raubenheimer, and A. Ringwall, “New Developments in the Next Linear Collider Beam Delivery System Design”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA32, pp. 3462-3464.
- M. Torikoshi et al., “Development of Superconducting Wiggler at NIRS”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPLE002, pp. 2442-2444.
- S. F. Xu, X. Y. He, P. Wang, W. Wang, and Q. Y. Yao, “Analysis of Tidal Effects on Measurement Accuracy of HLS”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPME027, pp. 2989-2991.
- S. M. Pattalwar et al., “Conceptual Design of a Cryomodule for Compact Crab Cavities for Hi-Lumi LHC”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper MOP087, pp. 353-356.
- R. Kazimi, J. Hansknecht, M. Spata, and H. Wang, “Source and Extraction for Simultaneous Four-hall Beam Delivery System at CEBAF”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI085, pp. 2896-2898.
- K. Mizushima et al., “Reliable Beam-Intensity Control Technique at the HIMAC Synchrotron”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper MOPA37, pp. 143-145.
- K. Fuchsberger and Y. I. Levinsen, “PYMAD – Integration of MADX in PYTHON”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC119, pp. 2289-2291.
- Y.-H. Liu et al., “TPS SR Kicker Prototype Installation Status”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC147, pp. 3230-3232.
- A. Andersson, “Phase Detection Electronics for CLIC”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC134, pp. 1338-1340.
- M. E. Angoletta et al., “Operation and New Capabilities of CERN's Digital LLRF Family for Injectors”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA094, pp. 4178-4181.
- Y. Hao, “Computation Requirement Towards the Future Electron Ion Collider, eRHIC”, in Proc. 12th Int. Computational Accelerator Physics Conf. (ICAP'15), Shanghai, China, Oct. 2015, pp. XX-XX.
- D. R. Grosso, R. Cimino, M. Commisso, R. Flammini, R. Larciprete, and R. Wanzenberg, “SEY of Al Samples from the Dipole Chamber of PETRA III at DESY”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS009, pp. 1533-1535.
- C. H. Yu et al., “BEPCII Performance and Beam Dynamics Studies on Luminosity”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1014-1018.
- Y. J. Pei et al., “A Low Cost and High Efficient Facility for Removal of SO2 and NOx in the Flue Gas from Coal Fire Power Plant”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FOAA011, pp. 660-662.
- N. Sunilkumar, G. L. Gassner, J. A. Safranek, and Y. T. Yan, “Characterization of Slow Orbit Motion in the SPEAR3”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE097, pp. 1215-1217.
Back to search