JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	S. D. Jang, S. J. Kwon, Y. G. Son, E. H. Song, J.-H. Suh, and J.-S. Oh, “Stabilization of a Klystron Voltage at 100 PPM Level for PAL XFEL”, in Proc. FEL'07, Novosibirsk, Russia, Aug. 2007, paper WEPPH033, pp. 424-427. 
[n]	J. Huang et al., “The Design of Permenant Magnet Spread System for 0.5 MeV Irradiation Accelerator”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 541-543. doi:10.18429/JACoW-RUPAC2016-THPSC003
[n]	Th. J. M. Sluyters, “Brookhaven's Recent Pre-Accelerator Progress”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper VII-05, pp. 383-389. 
[n]	T. Shintake et al., “Development of a Smart Modulator and Efficiency Evaluation of 500 GeV e+e- C-band Linear Collider”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THA12, pp. 763-765. 
[n]	D. C. Carey, “Minimization of Aberrations in Beam Line Design”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 493-496. 
[n]	J. Yang, K. Kan, T. Kondoh, A. Yoshida, and Y. Yoshida, “Femtosecond Single-bunch Electron Linear Accelerator Based on a Photocathode RF Gun”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS058, pp. 2514-2516. 
[n]	W. Namkung, Y. S. Lee, I. S. Ko, G. N. Kim, M. H. Cho, and H. S. Kang, “Pulsed Neutron Source using 100-MeV Electron Linac at Pohang Accelerator Laboratory”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUE06, pp. 621-623. 
[n]	C.-K. Sung, M. Cho, S. Kim, K. Moon, C. H. Shim, and H. Yang, “Longitudinal phase space measurement using a corrugated structure at the PAL-XFEL”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPS101, unpublished. 
[n]	L. C. Teng, “Performance Limitations Imposed by Beam Dynamics”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1826-1833. 
[n]	T. Kondoh, S. Tagawa, J. Yang, and Y. Yoshida, “Electron Beam Pulse Processing toward the Intensity Modified Radiation Therapy (IMRT)”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH172, pp. 2334-2336. 
[n]	S. Chouhan, D. A. Harder, G. Rakowsky, J. Skaritka, and T. Tanabe, “Research and Development of Variable Polarization Superconducting Undulator at the NSLS”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TOAB010, pp. 734-736. 
[n]	H. T. Edwards, W. W. Lee, J. D. McCarthy, S. Ohnuma, and L. C. Teng, “Half-Integer Resonance Extraction for the NAL Accelerator”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 424-428. 
[n]	D. C. Carey, “The Appearance of Beam Lines”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 47-50. 
[n]	J. Y. Huang, D. H. Jung, K. H. Kim, S. H. Nam, M. Yoon, and I. S. Ko, “Beam-Based Offset Calibration of the PLS BPM”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P082, pp. 2107-2109. 
[n]	B. R. Park et al., “Sequence Control System of 1-MW CW Klystron for the PEFP”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT014, pp. 1401-1403. 
[n]	S. Hu, K. Fan, L. X. F. Li, Z. Y. Mei, Z. J. Zeng, and L. G. Zhang, “Design and Fuild-Solid-Heat Coupling Analysis of an Electrostatic Deflector for Hust SCC250 Proton Therapy Facility”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4713-4715. doi:10.18429/JACoW-IPAC2017-THPVA109
[n]	S. H. Nam et al., “Development of a General Purpose Power System Control Board”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH120, pp. 3083-3085. 
[n]	M. H. Cho, J. S. Oh, S. S. Park, and W. Namkung, “Klystron-Modulator System Performances for PLS 2-GeV Linac”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAQ15, pp. 1556-1558. 
[n]	A. Faltens and D. Keefe, “Review of Induction Linacs”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper F01, pp. 205-213. 
[n]	R. E. Melen, B. Salsburg, and J. Yang, “Vacuum Contol System for Synchrotron Radiation Beam Lines”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3919-3922. 
[n]	S. Kim et al., “Simulation studies on optimization of hard and soft X-ray beamlines for parallel user service at the PAL-XFEL”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 235-238. doi:10.18429/JACoW-IPAC2025-MOPB098
[n]	S. Hu, K. Fan, L. X. F. Li, Z. Y. Mei, Z. J. Zeng, and L. G. Zhang, “Geant4 Simulation of Radiation Effect on the Deflector of Extraction System in HUST SCC250”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 990-993. doi:10.18429/JACoW-IPAC2018-TUPAK013
[n]	L. C. Teng, “Stochasticity Limit and Turbulent Motion of Phase-Space Fluid”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 843-846. 
[n]	M. Cho et al., “Averaged FEL algorithm to simulate an arbitrary FEL polarization”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 126-129. doi:10.18429/JACoW-IPAC2025-MOPB030
[n]	L. G. Zhang, K. Fan, S. Hu, Z. Y. Mei, and Z. J. Zeng, “Design of the Trim Coil for the Superconducting Cyclotron Extraction”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2840-2842. doi:10.18429/JACoW-IPAC2018-WEPML064
[n]	Y. Kim, M. H. Cho, I. S. Ko, W. Namkung, J. S. Oh, and D. Son, “Start-To-End Simulations for PAL XFEL Project”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper MOPOS18, pp. XX-XX. 
[n]	D. P. Jensen Jr, “Utilizing Additive Manufacturing to Create Prototype and Functional Beamline Instrumentation and Support Components”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 189. doi:10.18429/JACoW-MEDSI2020-TUPC07
[n]	H. B. Knowles, “Shielding and Experimental Layout”, in Proc. LINAC'62, Long Island, NY, USA, Aug. 1962, paper B-06, pp. 110-123. 
[n]	Z. Y. Mei, K. Fan, S. Hu, L. X. F. Li, Z. J. Zeng, and L. G. Zhang, “Central Region Design for a Superconducting Cyclotron in the HUST Proton Therapy Facility”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4716-4718. doi:10.18429/JACoW-IPAC2017-THPVA111
[n]	Th. J. M. Sluyters, “Recent Progress in Linac Pre-Accelerators”, in Proc. LINAC'68, Long Island, NY, USA, May 1968, paper D-1, pp. 228-239. 
[n]	S. Ohnuma, “Phase Oscillation and Transverse Focusing”, in Proc. LINAC'62, Long Island, NY, USA, Aug. 1962, paper B-02, pp. 65-75. 
[n]	I. S. Ko, W. Namkung, K. Shim, M. H. Cho, J. Choi, and K. H. Kim, “Simulation of the Global Orbit Feedback System for  Pohang Light Source”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP7A05, pp. 1906-1908. 
[n]	N. D. West, “The Nimrod Injector”, in Proc. LINAC'62, Long Island, NY, USA, Aug. 1962, paper A-04, pp. 38-49. 
[n]	D. Keefe, “Particle Acceleration by Collective Effects”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper F08, pp. 352-357. 
[n]	R. Perry, “The ZGS Injector”, in Proc. LINAC'62, Long Island, NY, USA, Aug. 1962, paper A-02, pp. 7-18. 
[n]	L. G. Zhang et al., “Topology Optimization for a Superconducting Cyclotron Main Magnet”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3446-3448. doi:10.18429/JACoW-IPAC2017-WEPVA081
[n]	T. Tanabe, A. Blednykh, D. A. Harder, M. Lehecka, G. Rakowsky, and J. Skaritka, “Insertion Device Upgrade Plans at the NSLS”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT026, pp. 1949-1951. 
[n]	N. Ueda et al., “Development of RFQ Linacs for Heavy Ions”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper MOB0009, pp. 71-73. 
[n]	D. C. Carey, “The Effect of Errors in Charged Particle Beams”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1146-1149. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search