Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. Iwata et al., “Upgrade of Septum Magnets for Fast Extraction in J-Parc Main Ring”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2103-2105. doi:10.18429/JACoW-IPAC2022-WEPOTK024
[n] X. Wu et al., “Installation, operations, and upgrade of a CS-30 cyclotron for the production of alpha emitters At-211 and Ac-225 at the Ionetix TAT facility”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPB048, unpublished.
[n] M. Zampetakis et al., “Refining the LHC Longitudinal Impedance Model”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 559-562. doi:10.18429/JACoW-HB2023-THBP37
[n] M. Okamura, J. M. Fite, V. Lo Destro, D. Raparia, and J. Ritter, “Steering Magnet Design for a Limited Space”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP005, pp. 136-138.
[n] Y. G. Song, S. Y. Cho, and J. H. Kim, “EPICS DAQ System for Beam Position Monitor at the KOMAC Linac and Beamlines”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 447-449. doi:10.18429/JACoW-ICALEPCS2021-TUPV027
[n] J. P. Dai, “Design Study of Beijing XFEL Test Facility”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP025, pp. XX-XX.
[n] J. Friedl, “DELTA, The Dortmund Electron Test Storage Ring Accelerator”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 463-466.
[n] D. Bruhwiler, J. R. Cary, R. E. Giacone, P. Mardahl, and J. Verboncoeur, “Simulations of Plasma Wakefield Acceleration with XOOPIC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2B04, pp. 877-879.
[n] A. Dolinskii et al., “Simulation Results on Cooling Times and Equilibrium Parameters for Antiproton Beams at the HESR”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT057, pp. 1972-1974.
[n] G. Lawler et al., “High gradient operation of cryogenic C-band RF photogun at UCLA”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 527-530. doi:10.18429/JACoW-IPAC2024-MOPR32
[n] Yu. A. Kubyshin, A. V. Aloev, N. I. Pakhomov, and V. I. Shvedunov, “A Novel Electron Gun for Off-axis Beam Injection”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP290, pp. 2029-2031.
[n] S. Keckert et al., “Mitigation of Parasitic Losses in the Quadrupole Resonator Enabling Direct Measurements of Low Residual Resistances of SRF Samples”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1196-1199. doi:10.18429/JACoW-IPAC2022-TUPOTK005
[n] E. Wisniewski et al., “Fabrication study of corrugated structure for sub-THz by stacking disks”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOPR28, unpublished.
[n] J. P. Koutchouk, “Architecture of the LEP Application Software”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1199-1202.
[n] B. Bondarev, A. Durkin, Y. Ivanov, I. Shumakov, and S. Vinogradov, “Some Results of RFQ Modelling Based on New Possibilities of LIDOS.RFQ Codes”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE110, pp. 1616-1618.
[n] M. Zhang and Q. G. Zhou, “Study of Nonlinear Beam Dynamics Effects for DEPU at SSRF”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPC075, pp. 1347-1349.
[n] D. Suddeth, “Microwave Ridged Waveguide Beam Pickups”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1886-1888.
[n] K. Kawa, T. Szumlak, C. Kokkinos, and F. Lackner, “High fidelity numerical modelling and condition monitoring applied to septum magnets at CERN”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3556-3559. doi:10.18429/JACoW-IPAC2024-THPR29
[n] R. Ferdinand et al., “Final Results of the SPIRAL2 Injector Commissioning”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 848-851. doi:10.18429/JACoW-IPAC2019-MOPTS006
[n] R. L. Parise et al., “Development of Diffusion Bonded Joints of AA6061 Aluminum Alloy to AISI 316LN Stainless Steel for Sirius Planar Undulators”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3459-3462. doi:10.18429/JACoW-IPAC2021-WEPAB334
[n] D. Young, “Design of Drift Tube Linacs”, in Proc. LINAC'62, Long Island, NY, USA, Aug. 1962, paper B-03, pp. 76-97.
[n] C. Liu et al., “Longitudinal Dynamics Simulation at Transition Crossing in RHIC with New Landau Cavity”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper MOPAB08, pp. 37-39.
[n] N. D. West, “The Nimrod Injector”, in Proc. LINAC'62, Long Island, NY, USA, Aug. 1962, paper A-04, pp. 38-49.
[n] M. Shimada and Y. Kobayashi, “Design of a 2-Loop Compact ERL”, in Proc. ERL'09, Ithaca, NY, USA, Jun. 2009, paper WG208, pp. 50-52.
[n] I. Miura et al., “Proposal for a New Ring Accelerator”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper C-08, pp. 2074-2077.
[n] C. Liu, K. A. Drees, A. Marusic, M. G. Minty, and C. Montag, “Global Optics Correction for Low Energy RHIC Run”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper MOPAB05, pp. 34-36.
[n] S. Iwata et al., “Development of a pulse current monitoring device for the Eddy septum magnets in J-PARC main ring”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2463-2466. doi:10.18429/JACoW-IPAC2023-TUPM104
[n] A. I. Novokshonov et al., “Scintillator Nonproportionality Studies at PITZ”, in Proc. IBIC'22, Kraków, Poland, Sep. 2022, pp. 277-280. doi:10.18429/JACoW-IBIC2022-TUP21
[n] I. N. Meshkov, “NICA Project at JINR”, in Proc. COOL'11, Alushta, Ukraine, Sep. 2011, paper MOIO02, pp. 6-9.
[n] C. Dickey, G. V. Karpov, J. Madey, A. S. Medvedko, E. I. Shubin, and N. I. Zinevich, “NMR System for Magnetic Field Measurements at the MARK-3 Free Electron Laser”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP009G, pp. 2541-2542.
[n] A. Bonatto et al., “On the Development of a Low Peak-Power, High Repetition-Rate Laser Plasma Accelerator at IPEN”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1713-1716. doi:10.18429/JACoW-IPAC2021-TUPAB141
[n] S. Ohnuma, “Phase Oscillation and Transverse Focusing”, in Proc. LINAC'62, Long Island, NY, USA, Aug. 1962, paper B-02, pp. 65-75.
[n] M. Vogel, X. Jiang, P. Murcek, J. Schaber, C. Wang, and R. Xiang, “Initial Study of GaN Thin Films for Photocathodes Prepared by Magnetron Sputtering on Copper Substrates”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2850-2852. doi:10.18429/JACoW-IPAC2021-WEPAB109
[n] C. Carli and M. Haj Tahar, “Systematic Effects Limiting the Sensitivity of Magic Energy" Proton EDM Rings"”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 602-605. doi:10.18429/JACoW-IPAC2021-MOPAB178
For LaTeX
Use Complete Form
For BibTeX
References
- S. Iwata et al., “Upgrade of Septum Magnets for Fast Extraction in J-Parc Main Ring”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2103-2105.
- X. Wu et al., “Installation, operations, and upgrade of a CS-30 cyclotron for the production of alpha emitters At-211 and Ac-225 at the Ionetix TAT facility”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPB048, this conference.
- M. Zampetakis et al., “Refining the LHC Longitudinal Impedance Model”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper THBP37, pp. 559-562.
- M. Okamura, J. M. Fite, V. Lo Destro, D. Raparia, and J. Ritter, “Steering Magnet Design for a Limited Space”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP005, pp. 136-138.
- Y. G. Song, S. Y. Cho, and J. H. Kim, “EPICS DAQ System for Beam Position Monitor at the KOMAC Linac and Beamlines”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 447-449.
- J. P. Dai, “Design Study of Beijing XFEL Test Facility”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper MOPP025, pp. XX-XX.
- J. Friedl, “DELTA, The Dortmund Electron Test Storage Ring Accelerator”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 463-466.
- D. Bruhwiler, J. R. Cary, R. E. Giacone, P. Mardahl, and J. Verboncoeur, “Simulations of Plasma Wakefield Acceleration with XOOPIC”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP2B04, pp. 877-879.
- A. Dolinskii et al., “Simulation Results on Cooling Times and Equilibrium Parameters for Antiproton Beams at the HESR”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT057, pp. 1972-1974.
- G. Lawler et al., “High gradient operation of cryogenic C-band RF photogun at UCLA”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPR32, pp. 527-530.
- Yu. A. Kubyshin, A. V. Aloev, N. I. Pakhomov, and V. I. Shvedunov, “A Novel Electron Gun for Off-axis Beam Injection”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP290, pp. 2029-2031.
- S. Keckert et al., “Mitigation of Parasitic Losses in the Quadrupole Resonator Enabling Direct Measurements of Low Residual Resistances of SRF Samples”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1196-1199.
- E. Wisniewski et al., “Fabrication study of corrugated structure for sub-THz by stacking disks”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPR28, unpublished.
- J. P. Koutchouk, “Architecture of the LEP Application Software”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1199-1202.
- B. Bondarev, A. Durkin, Y. Ivanov, I. Shumakov, and S. Vinogradov, “Some Results of RFQ Modelling Based on New Possibilities of LIDOS.RFQ Codes”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPLE110, pp. 1616-1618.
- M. Zhang and Q. G. Zhou, “Study of Nonlinear Beam Dynamics Effects for DEPU at SSRF”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPC075, pp. 1347-1349.
- D. Suddeth, “Microwave Ridged Waveguide Beam Pickups”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1886-1888.
- K. Kawa, T. Szumlak, C. Kokkinos, and F. Lackner, “High fidelity numerical modelling and condition monitoring applied to septum magnets at CERN”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR29, pp. 3556-3559.
- R. Ferdinand et al., “Final Results of the SPIRAL2 Injector Commissioning”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 848-851.
- R. L. Parise et al., “Development of Diffusion Bonded Joints of AA6061 Aluminum Alloy to AISI 316LN Stainless Steel for Sirius Planar Undulators”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3459-3462.
- D. Young, “Design of Drift Tube Linacs”, in Proc. 1962 Conf. on Linear Accelerators for High Energies (LINAC'62), Long Island, NY, USA, Aug. 1962, paper B-03, pp. 76-97.
- C. Liu et al., “Longitudinal Dynamics Simulation at Transition Crossing in RHIC with New Landau Cavity”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper MOPAB08, pp. 37-39.
- N. D. West, “The Nimrod Injector”, in Proc. 1962 Conf. on Linear Accelerators for High Energies (LINAC'62), Long Island, NY, USA, Aug. 1962, paper A-04, pp. 38-49.
- M. Shimada and Y. Kobayashi, “Design of a 2-Loop Compact ERL”, in Proc. 45th ICFA Advanced Beam Dynamics Workshop on Energy Recovery LINAC Workshop (ERL'09), Ithaca, NY, USA, Jun. 2009, paper WG208, pp. 50-52.
- I. Miura et al., “Proposal for a New Ring Accelerator”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper C-08, pp. 2074-2077.
- C. Liu, K. A. Drees, A. Marusic, M. G. Minty, and C. Montag, “Global Optics Correction for Low Energy RHIC Run”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper MOPAB05, pp. 34-36.
- S. Iwata et al., “Development of a pulse current monitoring device for the Eddy septum magnets in J-PARC main ring”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM104, pp. 2463-2466.
- A. I. Novokshonov et al., “Scintillator Nonproportionality Studies at PITZ”, in Proc. 11th Int. Beam Instrumentation Conference (IBIC'22), Kraków, Poland, Sep. 2022, pp. 277-280.
- I. N. Meshkov, “NICA Project at JINR”, in Proc. 8th Workshop on Beam Cooling and Related Topics (COOL'11), Alushta, Ukraine, Sep. 2011, paper MOIO02, pp. 6-9.
- C. Dickey, G. V. Karpov, J. Madey, A. S. Medvedko, E. I. Shubin, and N. I. Zinevich, “NMR System for Magnetic Field Measurements at the MARK-3 Free Electron Laser”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP009G, pp. 2541-2542.
- A. Bonatto et al., “On the Development of a Low Peak-Power, High Repetition-Rate Laser Plasma Accelerator at IPEN”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1713-1716.
- S. Ohnuma, “Phase Oscillation and Transverse Focusing”, in Proc. 1962 Conf. on Linear Accelerators for High Energies (LINAC'62), Long Island, NY, USA, Aug. 1962, paper B-02, pp. 65-75.
- M. Vogel, X. Jiang, P. Murcek, J. Schaber, C. Wang, and R. Xiang, “Initial Study of GaN Thin Films for Photocathodes Prepared by Magnetron Sputtering on Copper Substrates”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2850-2852.
- C. Carli and M. Haj Tahar, “Systematic Effects Limiting the Sensitivity of Magic Energy" Proton EDM Rings"”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 602-605.
Back to search