Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] W. Li, M. Palmer, I. Pogorelsky, and M. Polyanskiy, “Comparison of direct laser acceleration performance using radially polarized near infrared and long-wave infrared lasers”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPM082, unpublished.
[n] M. J. Cola, M. B. Lyons, D. F. Teter, and R. C. Gentzlinger, “Dissimilar Metal Joints for the APT Superconducting Cavity's Cryogenic Plumbing System”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP126, pp. 962-964.
[n] L. Du, X. Guan, C.-X. Tang, and Q. Z. Xing, “Preliminary Beam Dynamics and Structure Design of One 50mA/CW RFQ with Ramped Inter-vane Voltage”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO049, pp. 3881-3883.
[n] T. Wei, P. Li, Y. Li, and J. Pflueger, “Spontaneous Radiation of High-order Magnetic Field Undulator”, in Proc. SAP'17, Jishou, China, Aug. 2017, pp. 146-149. doi:10.18429/JACoW-SAP2017-TUPH09
[n] M. Wenskat et al., “A Cross-Lab Qualification of Modified 120??C Baked Cavities”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 90-94. doi:10.18429/JACoW-SRF2019-MOP026
[n] J. C. Smith et al., “Comparison of Tracking Codes for the International Linear Collider”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS013, pp. 3020-3022.
[n] S. Mitsunobu et al., “High Power Input Coupler for KEKB SC Cavity and New 1 MW Test Bench”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper THP33, pp. 703-705.
[n] S. M. Hartman, S. F. Mikhailov, V. Popov, and Y. K. Wu, “A Physics Based Approach for Ramping Magnet Control in a Compact Booster”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS036, pp. 515-517.
[n] W. Busse and C. Rethfeldt, “The ISL-Control-System Upgrade: A Move from an In-House Implementation to a Commercial Control-System”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper TU213, pp. XX-XX.
[n] I. Itahashi, M. Aoki, Y. Arimoto, Y. Kuno, A. Sato, and M. Y. Yoshida, “Extinction Monitor by Using a Dissociation of Hydrogen Molecule to Atoms with High Energy Proton Beam”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP072, pp. 3527-3529.
[n] E. G. Myers et al., “The Florida State University Superconducting Linac”, in Proc. SRF'87, Lemont, IL, USA, Sep. 1987, paper SRF87D05, pp. XX-XX.
[n] W. Kells, “Experimental Laboratory for Study of Nonlinear Quantum/Classical Dynamics in an R.F. Bucket”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1099-1102.
[n] S. Liu et al., “Collimator Performance Study at the European XFEL”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1717-1720. doi:10.18429/JACoW-IPAC2019-TUPRB019
[n] L. Y. Ji et al., “The Design and Calculation on the Injection and Central Region for CYCIAE-50”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 39-41. doi:10.18429/JACoW-CYCLOTRONS2019-MOP007
[n] E. C. M. Rial and J. C. Schouten, “Electron Beam Heating Effects in Superconducting Wigglers at Diamond Light Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD046, pp. 3195-3197.
[n] M. S. Zisman, “Physics and Technology Challenges of BB Factories”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1-6.
[n] A. Perry et al., “Saraf Superconducting module commissioning status”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO029, pp. 263-267.
[n] A. Dworak, P. Charrue, F. Ehm, W. Sliwinski, and M. Sobczak, “Middleware Trends and Market Leaders 2011”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper FRBHMULT05, pp. 1334-1337.
[n] D. Bloess, “Preparation and Handling of Surfaces for Superconducting Radio Frequency Cavities”, in Proc. SRF'87, Lemont, IL, USA, Sep. 1987, paper SRF87C08, pp. XX-XX.
[n] L. Popielarski et al., “Process Developments for Superconducting RF Low Beta Resonators for the ReA3 LINAC and Facility for Rare Isotope Beams”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPB071, pp. 342-344.
[n] J. C. Schouten and E. C. M. Rial, “Electron Beam Heating and Operation of the Cryogenic Undulator and Superconducting Wigglers at Diamond”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC179, pp. 3323-3325.
[n] F. Brinker, S. Casalbuoni, and W. Freund, “Correcting the Magnetic Field Offsets Inside the Undulators of the EuXFEL Using the K-Monochromator”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3953-3955. doi:10.18429/JACoW-IPAC2021-THPAB080
[n] M. P. Dunning et al., “Generation of Narrow-Band Coherent Tunable Terahertz Radiation using a Laser-Modulated Electron Beam”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUEPPB015, pp. 1146-1148.
[n] R. P. Walker et al., “Preparations for the Double Double Bend Achromat Installation in Diamond Light Source”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2953-2955. doi:10.18429/JACoW-IPAC2016-WEPOW048
[n] D. L. Friesel and S. Y. Lee, “CIS, A Low Energy Injector for the IUCF Cooler”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPG08, pp. 336-338.
[n] W.-D. Klotz and R. Pordes, “The Grid”, presented at the PAC'05, Knoxville, TN, USA, May 2005, paper ROPA008, unpublished.
[n] P. M??ller et al., “Surface Preparation and Optimization of SC CH Cavities”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 71-73. doi:10.18429/JACoW-SRF2019-MOP019
[n] R. Ghanbari, C. Bate, A. Dangwal Pandey, W. Hillert, and M. Wenskat, “Nitric Acid Soaking after Imperfect Furnace Treatments”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1211-1214. doi:10.18429/JACoW-IPAC2022-TUPOTK010
[n] C. Sun, J. Y. Li, G. Rusev, A. Tonchev, and Y. K. Wu, “Accurate Energy Measurement of an Electron Beam in a Storage Ring Using Compton Scattering Technique”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP045, pp. 3552-3554.
[n] R. Nussbaumer, “The ISAC Control System - Phase II”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_003.
[n] U. Trinks, “Status Report on the Triton/Munich”, in Proc. SRF'87, Lemont, IL, USA, Sep. 1987, paper SRF87D03, pp. XX-XX.
[n] E. Gjonaj and D. Bazyl, “Beam dynamics study of a CW L-band SRF gun for the high duty cycle EuXFEL”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2781-2784. doi:10.18429/JACoW-IPAC2023-WEPA054
[n] S. Humphries, J. McCarrick, and T. Orzechowski, “Simulation Tools for High-Intensity Radiographic Diodes”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAG053, pp. 3557-3559.
[n] M. W. Bruker, K. Aulenbacher, J. Dietrich, A. Hofmann, and T. Weilbach, “Secondary Electron Measurements at the HIM Electron Cooler Test Set-Up”, in Proc. COOL'15, Newport News, VA, USA, Sep.-Oct. 2015, paper MOPF08, pp. 48-50.
[n] T. Dohmae, K. Umemori, Y. Watanabe, M. Yamanaka, and T. Okada, “Investigation of SRF Elliptical Cavities Made by New Nb Materials in KEK”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 676-678. doi:10.18429/JACoW-LINAC2018-THPO002
[n] G. Haouat, “Experimental Results on Beam Halo”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6PC002, pp. XX-XX.
[n] M. K. Grecki, Z. Geng, S. Simrock, B. Aminov, and G. Ayvazyan, “LLRF System Requirement Engineering for the European XFEL”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper THP103, pp. 1033-1035.
[n] E. R. Harms et al., “Experience With LCLS-II Cryomodule Testing at Fermilab”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 1018-1022. doi:10.18429/JACoW-SRF2019-THP060
[n] G. Johnson and R. White, “History Data Facility in the SLC Control System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1540-1543.
[n] C. Sun, G. Rusev, A. Tonchev, and Y. K. Wu, “End-to-End Spectrum Reconstruction of Compton Gamma-Ray Beam to Determine Electron Beam Parameters”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP037, pp. 1363-1365.
[n] L. Liu, J. Qiu, J. Tang, and T. Wei, “Simulations of Longitudinal Phase Space Painting for the CSNS RCS Injection”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP054, pp. 1403-1405.
[n] N. Stapley et al., “An Integration Testing Facility for the CERN Accelerator Controls System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP085, pp. 838-840.
[n] M. Z. Zhang, J. Hou, B. C. Jiang, H. H. Li, and S. Q. Tian, “Vertical Beam Size Correction at the SSRF Storage Ring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC017, pp. 2043-2045.
For LaTeX
Use Complete Form
For BibTeX
References
- W. Li, M. Palmer, I. Pogorelsky, and M. Polyanskiy, “Comparison of direct laser acceleration performance using radially polarized near infrared and long-wave infrared lasers”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPM082, this conference.
- M. J. Cola, M. B. Lyons, D. F. Teter, and R. C. Gentzlinger, “Dissimilar Metal Joints for the APT Superconducting Cavity's Cryogenic Plumbing System”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP126, pp. 962-964.
- L. Du, X. Guan, C.-X. Tang, and Q. Z. Xing, “Preliminary Beam Dynamics and Structure Design of One 50mA/CW RFQ with Ramped Inter-vane Voltage”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO049, pp. 3881-3883.
- T. Wei, P. Li, Y. Li, and J. Pflueger, “Spontaneous Radiation of High-order Magnetic Field Undulator”, in Proc. 13th Symposium on Accelerator Physics (SAP'17), Jishou, China, Aug. 2017, pp. 146-149.
- M. Wenskat et al., “A Cross-Lab Qualification of Modified 120??C Baked Cavities”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 90-94.
- J. C. Smith et al., “Comparison of Tracking Codes for the International Linear Collider”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMS013, pp. 3020-3022.
- S. Mitsunobu et al., “High Power Input Coupler for KEKB SC Cavity and New 1 MW Test Bench”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper THP33, pp. 703-705.
- S. M. Hartman, S. F. Mikhailov, V. Popov, and Y. K. Wu, “A Physics Based Approach for Ramping Magnet Control in a Compact Booster”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAS036, pp. 515-517.
- W. Busse and C. Rethfeldt, “The ISL-Control-System Upgrade: A Move from an In-House Implementation to a Commercial Control-System”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper TU213, pp. XX-XX.
- I. Itahashi, M. Aoki, Y. Arimoto, Y. Kuno, A. Sato, and M. Y. Yoshida, “Extinction Monitor by Using a Dissociation of Hydrogen Molecule to Atoms with High Energy Proton Beam”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP072, pp. 3527-3529.
- E. G. Myers et al., “The Florida State University Superconducting Linac”, in Proc. 3rd Int. Conf. RF Superconductivity (SRF'87), Lemont, IL, USA, Sep. 1987, paper SRF87D05, pp. XX-XX.
- W. Kells, “Experimental Laboratory for Study of Nonlinear Quantum/Classical Dynamics in an R.F. Bucket”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1099-1102.
- S. Liu et al., “Collimator Performance Study at the European XFEL”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1717-1720.
- L. Y. Ji et al., “The Design and Calculation on the Injection and Central Region for CYCIAE-50”, in Proc. 22nd Int. Conf. on Cyclotrons and their Applications (Cyclotrons'19), Cape Town, South Africa, Sep. 2019, pp. 39-41.
- E. C. M. Rial and J. C. Schouten, “Electron Beam Heating Effects in Superconducting Wigglers at Diamond Light Source”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD046, pp. 3195-3197.
- M. S. Zisman, “Physics and Technology Challenges of BB Factories”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1-6.
- A. Perry et al., “Saraf Superconducting module commissioning status”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper TUPPO029, pp. 263-267.
- A. Dworak, P. Charrue, F. Ehm, W. Sliwinski, and M. Sobczak, “Middleware Trends and Market Leaders 2011”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper FRBHMULT05, pp. 1334-1337.
- D. Bloess, “Preparation and Handling of Surfaces for Superconducting Radio Frequency Cavities”, in Proc. 3rd Int. Conf. RF Superconductivity (SRF'87), Lemont, IL, USA, Sep. 1987, paper SRF87C08, pp. XX-XX.
- L. Popielarski et al., “Process Developments for Superconducting RF Low Beta Resonators for the ReA3 LINAC and Facility for Rare Isotope Beams”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper MOPB071, pp. 342-344.
- J. C. Schouten and E. C. M. Rial, “Electron Beam Heating and Operation of the Cryogenic Undulator and Superconducting Wigglers at Diamond”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC179, pp. 3323-3325.
- F. Brinker, S. Casalbuoni, and W. Freund, “Correcting the Magnetic Field Offsets Inside the Undulators of the EuXFEL Using the K-Monochromator”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3953-3955.
- M. P. Dunning et al., “Generation of Narrow-Band Coherent Tunable Terahertz Radiation using a Laser-Modulated Electron Beam”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUEPPB015, pp. 1146-1148.
- R. P. Walker et al., “Preparations for the Double Double Bend Achromat Installation in Diamond Light Source”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2953-2955.
- D. L. Friesel and S. Y. Lee, “CIS, A Low Energy Injector for the IUCF Cooler”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPG08, pp. 336-338.
- W.-D. Klotz and R. Pordes, “The Grid”, presented at the 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper ROPA008, unpublished.
- P. M??ller et al., “Surface Preparation and Optimization of SC CH Cavities”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 71-73.
- R. Ghanbari, C. Bate, A. Dangwal Pandey, W. Hillert, and M. Wenskat, “Nitric Acid Soaking after Imperfect Furnace Treatments”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1211-1214.
- C. Sun, J. Y. Li, G. Rusev, A. Tonchev, and Y. K. Wu, “Accurate Energy Measurement of an Electron Beam in a Storage Ring Using Compton Scattering Technique”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5RFP045, pp. 3552-3554.
- R. Nussbaumer, “The ISAC Control System - Phase II”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P1_003.
- U. Trinks, “Status Report on the Triton/Munich”, in Proc. 3rd Int. Conf. RF Superconductivity (SRF'87), Lemont, IL, USA, Sep. 1987, paper SRF87D03, pp. XX-XX.
- E. Gjonaj and D. Bazyl, “Beam dynamics study of a CW L-band SRF gun for the high duty cycle EuXFEL”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA054, pp. 2781-2784.
- S. Humphries, J. McCarrick, and T. Orzechowski, “Simulation Tools for High-Intensity Radiographic Diodes”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAG053, pp. 3557-3559.
- M. W. Bruker, K. Aulenbacher, J. Dietrich, A. Hofmann, and T. Weilbach, “Secondary Electron Measurements at the HIM Electron Cooler Test Set-Up”, in Proc. 10th Workshop on Beam Cooling and Related Topics (COOL'15), Newport News, VA, USA, Sep.-Oct. 2015, paper MOPF08, pp. 48-50.
- T. Dohmae, K. Umemori, Y. Watanabe, M. Yamanaka, and T. Okada, “Investigation of SRF Elliptical Cavities Made by New Nb Materials in KEK”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 676-678.
- G. Haouat, “Experimental Results on Beam Halo”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6PC002, pp. XX-XX.
- M. K. Grecki, Z. Geng, S. Simrock, B. Aminov, and G. Ayvazyan, “LLRF System Requirement Engineering for the European XFEL”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper THP103, pp. 1033-1035.
- E. R. Harms et al., “Experience With LCLS-II Cryomodule Testing at Fermilab”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 1018-1022.
- G. Johnson and R. White, “History Data Facility in the SLC Control System”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1540-1543.
- C. Sun, G. Rusev, A. Tonchev, and Y. K. Wu, “End-to-End Spectrum Reconstruction of Compton Gamma-Ray Beam to Determine Electron Beam Parameters”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6PFP037, pp. 1363-1365.
- L. Liu, J. Qiu, J. Tang, and T. Wei, “Simulations of Longitudinal Phase Space Painting for the CSNS RCS Injection”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6PFP054, pp. 1403-1405.
- N. Stapley et al., “An Integration Testing Facility for the CERN Accelerator Controls System”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP085, pp. 838-840.
- M. Z. Zhang, J. Hou, B. C. Jiang, H. H. Li, and S. Q. Tian, “Vertical Beam Size Correction at the SSRF Storage Ring”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC017, pp. 2043-2045.
Back to search