JaCoW Logo

Reference Search
Warning
Some papers titles are all uppercase, you must correct this before using this reference.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	M. A. Plum et al., “SNS Stripper Foil Failure Modes and Their Cures”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEB039, pp. 3969-3971. 
[n]	A. S. Fisher et al., “THz Pump and X-Ray Probe Development at LCLS”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper TUPB22, pp. 304-307. 
[n]	S. Ohnuma, “Possible Benefits from Shuffling Dipoles in the RHIC”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1176-1179. 
[n]	J. Klabunde, A. A. Kolomiets, V. Pershin, I. Vorobyov, and S. Yaramishev, “DYNAMION - The Code for Beam Dynamics Simulations in High Current Ion Linac”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP04F, pp. 1201-1203. 
[n]	H. P. Bohlen, “Advanced High-Power Microwave Vacuum Electron Device Development”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THBL3, pp. 445-449. 
[n]	S. Ohnuma, “A Study of the One-Third Integer Resonance Extraction for the 200 GeV Accelerator”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 1015-1018. 
[n]	M. Bai et al., “Distributed coupling linac for efficient acceleration of high charge electron bunches”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2064-2066. doi:10.18429/JACoW-IPAC2023-TUPL141
[n]	I. M. Kapchinskij, A. M. Kozodaev, N. V. Lazarev, and V. S. Skachkov, “Design and Development of Permanent Magnet Quadrupoles for Ion Linacs”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper F07, pp. 350-351. 
[n]	I. Almog, J. Jaeger, M. Lee, and M. Woodley, “On-Line Model Driven Control of the SLC Electron Damping Ring”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2098-2101. 
[n]	A. Fisher, P. Gilad, F. Goldin, and N. Rostoker, “Studies of an Unneutral Electron Cloud in the CFIA”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3383-3386. 
[n]	T. Zhang, S. Ninomiya, K. Sato, S. Morioka, H. Saito, and Y. Sasaki, “Development for Large Dynamical Field Range,Wide Good Field Region C-Magnet”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH153, pp. 3603-3605. 
[n]	H. Lim, D. H. Jeong, M. W. Lee, M. J. Lee, S. W. Shin, and J. Yi, “Design of a Radiotherapy Machine using the 6 MeV C-Band Standing-Wave Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1921-1923. doi:10.18429/JACoW-IPAC2016-TUPOY008
[n]	D. W. Hudgings and A. J. Jason, “Los Alamos Proton Storage Ring Extraction System”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2791-2794. 
[n]	H. Zhang, S. V. Benson, M. W. Bruker, and Y. Zhang, “JSPEC - A Simulation Program for IBS and Electron Cooling”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 49-52. doi:10.18429/JACoW-IPAC2021-MOPAB004
[n]	R. Fedele and V. I. Man, “Quantum-like Corrections and Tomography in Beam Physics”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP01D, pp. 1268-1270. 
[n]	W. B. Cottingame, G. P. Boicourt, J. H. Cortez, W. W. Higgins, O. R. Sander, and D. P. Sandoval, “Noninterceptive Techniques for the Measurement of Longitudinal Parameters for Intense H- Beams”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1871-1874. 
[n]	M. Jain et al., “The L-CAPE Project at FNAL”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 719-722. doi:10.18429/JACoW-NAPAC2022-WEPA40
[n]	D. Greenwald, Y. Bao, and A. Caldwell, “Frictional Cooling Demonstration Experiment”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEB030, pp. 1590-1592. 
[n]	Y. Cai and I. Reichel, “New Method of Dispersion Correction in the PEP-II Low Energy Ring”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP3A09, pp. 1069-1070. 
[n]	R. P. Wells et al., “Development of a Compact Permanent Magnet Cyclotron for Accelerator Mass Spectrometry”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1727-1730. 
[n]	Y. K. Semertzidis et al., “Electro-Optical Detection of Charged Particle Beams”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THBR4, pp. 490-491. 
[n]	S. Morioka, S. Ninomiya, H. Saito, Y. Sasaki, K. Sato, and T. Zhang, “An Improved Method for the Dipole and Quadrupole Magnet Design”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP4B10, pp. 2119-2121. 
[n]	J. E. Spencer, “Optimal, Real-Time Control-Colliders”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1440-1443. 
[n]	T. S. Wang, “A Three-Dimensional Kinetic Theory of Continuous-Beam Stability”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPB036, pp. 3092-3094. 
[n]	P. Golonka and M. Gonzalez-Berges, “Integrated Access Control for PVSS-based SCADA Systems at CERN”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP101, pp. 597-599. 
[n]	N. Suradet, G. G. Hoyes, P. Klysubun, S. Krainara, P. Sudmuang, and S. Teawphet, “Improvement of the Siam Photon Source Beam Loss Monitor System”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 190-192. doi:10.18429/JACoW-IBIC2015-MOPB058
[n]	Y. Shoji, T. Asaka, Y. Hisaoka, T. Matsubara, T. Mitsui, and S. Suzuki, “Circulation of a Short, Intense Electron Bunch in the NewSUBARU Storage Ring”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH055, pp. 163-165. 
[n]	R. Olsen, “PEP-II 16-Channel Corrector Controller Using BITBUS”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P015, pp. 3485-3487. 
[n]	J. Keil and K. Balewski, “Correction of the Linear Optics at PETRA III”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD085, pp. 4482-4484. 
[n]	S. Eylon, E. Henestroza, M. Vella, S. S. Yu, and C. Ekdahl, “Electron Beam, 3.5MV, 2kA Injector Diode Diagnostics for the DARHT Facility”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH126, pp. 2380-2382. 
[n]	J. Dehen et al., “Beam Dynamics in an Energy-variable RF-Accelerator for Ion Implantation”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2641-2644. 
[n]	D. Boussard, L. Evans, J. Gareyte, T. Linnecar, W. Mills, and E. J. N. Wilson, “Acceleration and Storage of a Dense Single Bunch in the CERN SPS”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3484-3487. 
[n]	J. A. Martin, “The Separated-Orbit Cyclotron”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper E-004, pp. XX-XX. 
[n]	R. E. Shafer, B. Blind, E. R. Gray, J. D. Gilpatrick, D. Barlow, and G. P. Lawrence, “Overview of the APT High-Energy Beam Transport and Beam Expanders”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2B011, pp. 83-85. 
[n]	O. Nezhevenko, D. Myakishev, V. Tarnetsky, and V. Yakovlev, “TW Accelerating Structures with Minimal Surface Electric Field”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPA12, pp. 1076-1078. 
[n]	T. Tajima, M. Cavenago, and B. Newberger, “Neutral Composite Particle Transport in Crystal X-Ray Accelerators”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 637-640. 
[n]	C. Kwankasem and S. Chunjarean, “Storage Ring Beam Dynamics Modeling with Limited Instrumentation”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP029, pp. 4369-4371. 
[n]	G. M. wang et al., “Experimental Progress of DC-SC Photoinjector at Peking University”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP048, pp. XX-XX. 
[n]	M. H. Zhao et al., “Commissioning of the 150 MeV SSRF Linac”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP124, pp. 3649-3651. 
[n]	W. Treutterer et al., “Software Structure and Real-Time Signal Exchange for the ASDEX Upgrade Tokamak Control System”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper TH111, pp. XX-XX. 
[n]	R. Perry, “An Extended RF Ion Source with Small Phase Space Emittance Area”, in Proc. LINAC'64, Madison, WI, USA, Jul. 1964, paper PART5-3, pp. 474-479. 
[n]	G. Andonian et al., “Beam profile monitor using thin gas sheets”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPS111, unpublished. 
[n]	M. Li and S. Ohnuma, “Comparison of Analytical and Computational Estimates of Reduction in Linear Aperture in the Presence of Sextupole Field”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 897-900. 
[n]	H. Suzuki et al., “Synchrotron of SPring-8”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2039-2042. 
[n]	I. Reichel and A. Wolski, “Intrabeam Scattering Studies for the ILC Damping Rings Using a New Matlab Code”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH146, pp. 2266-2268. 
[n]	R. MacGill and R. Yourd, “Mechanical Design of a Heavy Ion RFQ”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3004-3007. 
[n]	V. Sabaiduc, G. Gold, B. A. Versteeg, and J. Panama, “Resonator System for the BEST 70 MeV Cyclotron”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TU2PB04, pp. 153-155. 
[n]	N. Kumar, I. Maltusch, O. Stringer, C. P. Welsch, J. Wolfenden, and H. D. Zhang, “Development of Quantum Gas Jet Beam Profile Monitor for Sub-mm Beams”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 223-226. doi:10.18429/JACoW-LINAC2022-MOPORI03
[n]	G. G. Kelley, “Ion Source and Column Performance at ORNL”, in Proc. LINAC'64, Madison, WI, USA, Jul. 1964, paper PART4-9, pp. 456-464. 
[n]	H. Deruyter, R. Miller, A. V. Mishin, J. Potter, T. Roumbanis, and R. Schonberg, “Properties and Possible Applications of Multiple Beam Coupled Cavity Structure”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP118G, pp. 810-812. 
[n]	A. S. King, M. J. Lee, and P. L. Morton, “Closed Orbit Correctiion in SPEAR”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 898-900. 
[n]	D. W. Reid, A. Harvey, G. W. Rodenz, and R. F. Holsinger, “SUPERFISH”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper C04, pp. 99-101. 
[n]	A. Adelmann, Y. J. Bi, Y. Ineichen, C. Kraus, S. J. Russell, and J. J. Yang, “The Object Oriented Parallel Accelerator Library (OPAL), Design, Implementation and Application”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper WE3IOPK01, pp. 107-110. 
[n]	V. K. Grishin, B. S. Ishkhanov, T. A. Novikova, and V. I. Shvedunov, “Free Electron Laser - FEL - Study in Institute of Nuclear Physics of MSU”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAA14, pp. 225-227. 
[n]	M. Stirbet, J. Popielarski, T. L. Grimm, and M. Johnson, “RF Conditioning and Testing of Fundamental Power Couplers for the RIA Project”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper THP26, pp. 682-684. 
[n]	R. Ruo et al., “Design of the Low Energy Beam Transport Line for Xi`an Proton Application Facility”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1343-1345. doi:10.18429/JACoW-IPAC2016-TUPMR041
[n]	I. Reichel and A. Wolski, “Tracking Studies to Determine the Required Wiggler Aperture for the ILC Damping Rings”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS137, pp. 879-881. 
[n]	R. Valdiviez et al., “The Mechanical Design of a Proton Microscope for Radiography at 800 MeV”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB020, pp. 1664-1666. 
[n]	J. T. M. Lyles, W. C. Barkley, R. E. Bratton, M. S. Prokop, and D. Rees, “Design, Fabrication, Installation and Operation of New 201 MHz RF Systems at LANSCE”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 564-567. doi:10.18429/JACoW-LINAC2016-TUPLR046
[n]	G. Schmidt, U. Berges, J. Friedl, E. Kasel, K. Wille, and D. Zimoch, “Position Sensors for Monitoring Accelerator Magnet Motion at DELTA (Dortmund Electron Accelerator)”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI118, pp. 2658-2660. 
[n]	B. C. Heisen et al., “Karabo: An Integrated Software Framework Combining Control, Data Management, and Scientific Computing Tasks”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper FRCOAAB02, pp. 1465-1468. 
[n]	S. Shchelkunov, S. Kazakov, V. Yakovlev, A. Kanareykin, E. Nenasheva, and J. Hirshfield, “Fast Ferroelectric Phase Shifter Design for ERLs”, in Proc. ERL'09, Ithaca, NY, USA, Jun. 2009, paper WG317, pp. 67-71. 
[n]	J. Xia, Z. Bai, C. Chen, J. Xu, and Z. Zhu, “Preliminary electromagnetic design of a high-temperature superconducting superbend for the Hefei Advanced Light Facility”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPM066, unpublished. 
[n]	J. Berg, “A Fixed Field Alternating Gradient Lattice Design for Acceleration to energies as high as 5 TeV”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPL160, unpublished. 
[n]	A. M. Vetter, J. L. Adamski, R. W. Kruse, and A. G. Krycuk, “High Power RF Tests of 433 MHz Single-Cell Accelerator Cavities and Associated Feed System”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 183-186. 
[n]	L. Bernard et al., “Wide Dynamic Range (7 Decades) Beam Position and Profile Measurement for the CERN LEAR”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2247-2250. 
[n]	S. Lenci, E. Eisen, and B. Stockwell, “Development of An 805-MHz, 550 kW Pulsed Klystron for The Spallation Neutron Source”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU484, pp. 512-514. 
[n]	K. Horioka et al., “Rapidly Switched Accelerating Devices for Induction Synchrotrons”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP4A14, pp. 1966-1968. 
[n]	M. J. Rhee, “Fully Stripped Ion Beams Produced by Pulse Powered Plasma Focus Device”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2663-2666. 
[n]	A. Zucker, “Sector - Focused Cyclotrons for Nuclear Physics Research”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63C01, pp. XX-XX. 
[n]	T. Hori, T. Mitsumoto, Y. Sasaki, and M. Sugitani, “Improvement of 150 MeV Racetrack Microtron”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2877-2880. 
[n]	J. D. Bailey, “Axial Injection and Phase Selection Studies of the MSU K1200 Cyclotron”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAP09, pp. 372-374. 
[n]	J. J. Petillo, D. P. Chernin, and A. A. Mondelli, “Beam Dynamics in the Spiral-Line Inducton Accelerator”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1055-1058. 
[n]	M. Dehnel et al., “The TR16/8, Dual Particle Cyclotron for Clinical Isotope Production”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1682-1685. 
[n]	R. H. Helm, H. A. Hogg, R. F. Koontz, G. A. Loew, R. H. Miller, and R. B. Neal, “Recent Beam Performance and Developments a SLAC”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 311-316. 
[n]	V. L. Granatstein, L. R. Barnett, and M. E. Read, “Gyrotrons:  Using Relativistic Electronics to Produce High Power, High Efficiency, Millimeter-Wave Sources”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2733-2737. 
[n]	J. P. Edelen et al., “A Flexible EPICS Framework for Sample Alignment at Neutron Beamlines”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 836-840. doi:10.18429/JACoW-ICALEPCS2023-TUPDP113
[n]	A. J. Dick, J. D. Jarvis, and P. Piot, “Characterization and Simulation of Optical Delay System for the Proof-of-Principle Experiment of Optical Stochastic Cooling at IOTA”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3269-3272. doi:10.18429/JACoW-IPAC2021-WEPAB270
[n]	S. De Silva and T. Satogata, “SRF cavities for crabbing at the Electron-Ion Collider”, presented at the IPAC'23, Venice, Italy, May 2023, paper THYG1, unpublished. 
[n]	B. Anderberg et al., “The 500 MeV Injector for MAX-lab using a Recirculated Linac”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP1B06, pp. 1687-1692. 
[n]	D. Wisnivesky et al., “Upgrading of the LNLS Injection System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9W031, pp. 1209-1211. 
[n]	U. Becker et al., “New Simulation Results for the S-DALINAC Electron Source”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA154, pp. 2951-2953. 
[n]	S. Chunjarean, C.-S. Hwang, J. C. Jan, F.-Y. Lin, and P. H. Lin, “Field Optimization in Superconducting Undulators”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP079, pp. 2450-2452. 
[n]	F. Brinker, “Towards the sub-Ångström regime at EuXFEL: simulations and first experimental results”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUZD2, unpublished. 
[n]	M. Lonza et al., “Status Report of the FERMI@Elettra Control System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper TUDAUST02, pp. 589-592. 
[n]	S. Dewan et al., “1400A,+/-900V Peak Pulse Switch Mode Power Supplies for SNS Injection Kickers”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPE015, pp. 770-772. 
[n]	F. Becker, F. M. Bieniosek, P. Forck, D. H. H. Hoffmann, and P. N. Ni, “Beam Induced Fluorescence (BIF) Monitor for Intense Heavy Ion Beams”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper TUPTPF054, pp. 236-240. 
[n]	M. J. Lee, W. J. Corbett, and J. Wu, “A New Model-Independent Method for Optimization of Machine Settings and Electron Beam Parameters”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper THPSC023, pp. 308-310. 
[n]	K. R. Crandall, “A Numerical Experiment on Space-Charge Effects”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper V-07, pp. 233-236. 
[n]	G. Liu et al., “The Upgrade of HLS Linac Control System”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPE014, pp. 2357-2359. 
[n]	W. C. Barry, P. K. Kloeppel, and R. Rossmanith, “Absolute Measurement of Beam Energy by Compton Scattering”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1136-1139. 
[n]	C. H. Kim and H. Nishimura, “Dynamic Aperture of the ALS Booster Synchrotron”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1328-1331. 
[n]	M. J. Barnes and G. D. Wait, “Low Power Measurements on an AGS Injection Kicker Magnet”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN069, pp. 2188-2190. 
[n]	I. V. Pogorelov et al., “Machine Learning Based Noise Reduction of Neutron Camera Images at ORNL”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 841-845. doi:10.18429/JACoW-ICALEPCS2023-TUPDP114
[n]	A. H. Ball, H. Burkhardt, and G. von Holtey, “Particle Background at LEP with Head-On Colliding Bunch Trains”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP029G, pp. 430-432. 
[n]	F. E. Merrill et al., “Imaging Systems for 800 MeV Proton Radiography”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 4057-4059. doi:10.18429/JACoW-IPAC2014-FRXBA01
[n]	Y. Bao, A. Caldwell, and D. Greenwald, “A Sphere Cooler Scheme for Muon Cooling”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP017, pp. 139-141. 
[n]	V. L. Granatstein et al., “Prospects for Developing Microwave Amplifiers to Drive Multi-TeV Linear Colliders”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAQ17, pp. 1561-1562. 
[n]	?à. Andersson, M. Eriksson, M. Georgsson, G. LeBlanc, L.-J. Lindgren, and S. Werin, “MAX-III, a 700 MeV Storage Ring for Synchrotron Radiation”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP4A19, pp. 643-644. 
[n]	M. J. Barnes, C. B. Figley, and G. D. Wait, “A Variable Duty Factor Beam Chopper for a 300 keV Injection Beamline”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2541-2544. 
[n]	Yu. K. Alekseev and V. I. Shvedunov, “An Open Resonator Particle Accelerator”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2B03, pp. 892-894. 
[n]	T. K. Khoe and L. C. Teng, “Depolarization Process in Sector - Focusing Cyclotrons”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63C05, pp. XX-XX. 
[n]	C. H. Kim, “Comparison of Electric and Magnetic Quadrupole Focusing for the Low Energy End of an Induction-Linac-ICF Driver”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 951-954. 
[n]	Y. Shoji, S. H. Hisao, and T. Matsubara, “Quasi-isochronus Operation at NewSUBARU”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPKF037, pp. 2356-2358. 
[n]	M. L. Mallory, J. B. Ball, D. Dowling, E. D. H. Hudson, R. S. L. Lord, and A. Tatum, “ORIC Beam Energy Increase”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAE032, pp. 2257-2259. 
[n]	J. F. DeFord, G. D. Craig, G. Kamin, and L. Walling, “Computation of Wakefields in Structures containing Dispersive Materials”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper WE1-04, pp. 550-554. 
[n]	R. Garnett, T. Larkin, G. Lawrence, and D. Liska, “Design and Simulation of a Bridge-Coupled DTL Structure for the 20-80 MeV Region of a Proton Linac for Accelerator Transmutation of Waste”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-68, pp. 802-804. 
[n]	N. Fewell and R. Witkover, “Beam Diagnostics at the BNL 200 MeV Linac”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper C02, pp. 54-62. 
[n]	P. R. Sarma, “Ideal Coil-Shape for Perfect Field in Superconducting Sextupole Magnets”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA020, pp. 658-660. 
[n]	I. A. Chernyavskiy, T. M. Antonsen, S. J. Cooke, B. Levush, and A. N. Vlasov, “Code TESLA for Modeling and Design of High-Power, High-Efficiency Klystrons”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP010, pp. 826-828. 
[n]	M. C. Ross et al., “Generation and Acceleration of High Intensity Beams in the SLC Injector”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3160-3163.

For LaTeX

Use Complete Form

For BibTeX

References

Back to search