Favourites
For Word
[n] M. W. Guetg and S. Reiche, “Optimization of FEL Performanceby Dispersion-based Beam-tilt Correction”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP016, pp. 714-717.
[n] M. Ahammed et al., “Fabrication and Installation of Radio Frequency System for K500 Superconducting Cyclotron at Kolkata”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA001, pp. 3673-3675.
[n] J. Jacob, P. B. Borowiec, A. D'Elia, G. Gautier, and V. Serri?¿re, “ESRF-EBS 352.37 MHz Radio Frequency System”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 395-398. doi:10.18429/JACoW-IPAC2021-MOPAB108
[n] L. W. Lai et al., “The Application of Direct RF Sampling System on Cavity BPM Signal Processing”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 278-280. doi:10.18429/JACoW-IBIC2017-TUPWC01
[n] V. Roger et al., “Optimization of static heat loads of the PIP-II cryomodules based on prototype HB650 cryomodule test results”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 695-698. doi:10.18429/JACoW-LINAC2024-THPB029
[n] N. Ohuchi et al., “Design and Construction of the QC2 Superconducting Magnets in the SuperKEKB IR”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1174-1176. doi:10.18429/JACoW-IPAC2016-TUPMB033
[n] Y.-C. Chen, R. Agustsson, O. Chimalpopoca, and A. Schillaci, “Finalizing the multiphysics design of a high heat-load superconducting undulator”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPM071, unpublished.
[n] E. Echeverria, A. Galdi, C. Pennington, J. Maxson, M. Hines, and Q. Zhu, “Correlation between the stoichiometry of $Cs_xSb_y$ and its photoemission properties and oxidation response”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPA134, unpublished.
[n] R. Neswold and CA. King, “Further Developments in Generating Type-Safe Messaging”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKS023, pp. 836-839.
[n] S. Szustkowski, B. T. Freemire, S. Chattopadhyay, and D. J. Crawford, “Development of a Gas Sheet Beam Profile Monitor for IOTA”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2326-2329. doi:10.18429/JACoW-IPAC2018-WEPAL065
[n] Y. Gao et al., “Experiment of Bayesian Optimization for Trajectory Alignment at Low Energy RHIC Electron Cooler”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 987-990. doi:10.18429/JACoW-IPAC2022-TUPOST054
[n] R. J. Ducar, “Tevatron Serial Data Repeater System”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2301-2303.
[n] L. Faillace et al., “Design, fabrication and mechanical tests of TIG-welded Ka-band accelerating structures for ultra-high gradient applications”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2976-2979. doi:10.18429/JACoW-IPAC2023-WEPA134
[n] G. Shen et al., “High Performance Data Acquisition for a Modern Accelerator”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 303-306. doi:10.18429/JACoW-IBIC2020-FRAO05
[n] D. P. Piso, M. Rescic, G. Cijan, and R. Schmidt, “A PLC Test Bench at ESS”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3171-3173. doi:10.18429/JACoW-IPAC2014-THPRO118
[n] J. M. Potter, “An RF Power Manifold for the Radio Frequency Quadrupole Linear Accelerator”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S3-2, pp. 138-143.
For LaTeX
Use Complete Form
For BibTeX
References
- M. W. Guetg and S. Reiche, “Optimization of FEL Performanceby Dispersion-based Beam-tilt Correction”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper THP016, pp. 714-717.
- M. Ahammed et al., “Fabrication and Installation of Radio Frequency System for K500 Superconducting Cyclotron at Kolkata”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEA001, pp. 3673-3675.
- J. Jacob, P. B. Borowiec, A. D'Elia, G. Gautier, and V. Serri?¿re, “ESRF-EBS 352.37 MHz Radio Frequency System”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 395-398.
- L. W. Lai et al., “The Application of Direct RF Sampling System on Cavity BPM Signal Processing”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 278-280.
- V. Roger et al., “Optimization of static heat loads of the PIP-II cryomodules based on prototype HB650 cryomodule test results”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 695-698.
- N. Ohuchi et al., “Design and Construction of the QC2 Superconducting Magnets in the SuperKEKB IR”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1174-1176.
- Y.-C. Chen, R. Agustsson, O. Chimalpopoca, and A. Schillaci, “Finalizing the multiphysics design of a high heat-load superconducting undulator”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPM071, this conference.
- E. Echeverria, A. Galdi, C. Pennington, J. Maxson, M. Hines, and Q. Zhu, “Correlation between the stoichiometry of $Cs_xSb_y$ and its photoemission properties and oxidation response”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA134, unpublished.
- R. Neswold and CA. King, “Further Developments in Generating Type-Safe Messaging”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPKS023, pp. 836-839.
- S. Szustkowski, B. T. Freemire, S. Chattopadhyay, and D. J. Crawford, “Development of a Gas Sheet Beam Profile Monitor for IOTA”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2326-2329.
- Y. Gao et al., “Experiment of Bayesian Optimization for Trajectory Alignment at Low Energy RHIC Electron Cooler”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 987-990.
- R. J. Ducar, “Tevatron Serial Data Repeater System”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2301-2303.
- L. Faillace et al., “Design, fabrication and mechanical tests of TIG-welded Ka-band accelerating structures for ultra-high gradient applications”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA134, pp. 2976-2979.
- G. Shen et al., “High Performance Data Acquisition for a Modern Accelerator”, in Proc. 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, pp. 303-306.
- D. P. Piso, M. Rescic, G. Cijan, and R. Schmidt, “A PLC Test Bench at ESS”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3171-3173.
- J. M. Potter, “An RF Power Manifold for the Radio Frequency Quadrupole Linear Accelerator”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S3-2, pp. 138-143.
Back to search