Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] H. Gaiser, K. Kaspar, U. Ratzinger, S. Minaev, and B. Krietenstein, “Status of the 36 MHz Linac Cavities for the GSI High Current Injector”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA70, pp. 3552-3554.
[n] M. Bickley, P. Chevtsov, and T. Larrieu, “Device Configuration Handler for Accelerator Control Applications at Jefferson Lab”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP584, pp. XX-XX.
[n] E. Laface, “On Coordinate Systems in Beam Dynamics”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 243-246. doi:10.18429/JACoW-IPAC2019-MOPGW067
[n] V. M. Borin et al., “The Logitudinal Broadband Impedance and Energy Spread Measurements at the VEPP-4M Electron-Positron Collider”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3117-3119. doi:10.18429/JACoW-IPAC2017-WEPIK081
[n] K. Kumagai, N. Kumagai, K. Soutome, H. Tanaka, and C. Zhang, “Development and Installation of Skew Quadrupole Magnets for SPring-8 Storage Ring”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP4A03, pp. 2104-2106.
[n] J. Bahng, B. H. Choi, D. S. Kim, and E.-S. Kim, “Development of RFQ for BNCT Accelerator”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4260-4262. doi:10.18429/JACoW-IPAC2017-THPIK073
[n] Y.-H. Liu, Y.-C. Chung, C. K. Kuan, and Z.-D. Tsai, “The Data Acquisition System and Inspection Equipment on Vibration Evaluation for Deionized and Cooling Water Pumps in TPS”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3568-3570. doi:10.18429/JACoW-IPAC2017-WEPVA128
[n] N. R. Lobanov and D. C. Weisser, “Nb Sputter Coating on QWR in ANU”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97D36, pp. 1125-1155.
[n] J. L. Gonzalez, T. B. Bogey, C. Deplano, and J.-J. Savioz, “Development of a High Dynamic Range Beam Position Measurement System Using Logarithmic Amplifiers for the SPS at CERN”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPC18, pp. 89-92.
[n] O. B. van Dyck, “An 800-MeV Spin Precessor for Polarized H- Beams using H- to Ho Stripping”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3992-3995.
[n] M. Camarda et al., “Towards Full Silicon 4H-SiC Based X-Ray Beam Monitoring”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 665-668. doi:10.18429/JACoW-IBIC2019-THAO02
[n] S. R. Mane, “Space-Charge Effets in the Fermilab Main Ring at 8 GeV”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1804-1806.
[n] G. B. Shen, M. R. Kraimer, and L. Yang, “Prototype of Beam Commissioning Environment and its Applications for NSLS-II”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB026, pp. 2740-2742.
[n] D. K. Desjardins, A. C. Carcy, J. L. Giorgetta, C. Menneglier, M. Scheel, and T. Weitkamp, “Design of Indirect X-Ray Detectors for Tomography on the Anatomix Beamline”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 355-357. doi:10.18429/JACoW-MEDSI2018-THPH09
[n] J. Pflueger, “Insertion Devices For 4th Generation Light Sources”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUAR3, pp. 157-161.
[n] N. Kamikubota et al., “Updates on J-PARC MR Control Over the Last One Decade”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, paper WEPHA076, pp. XX-XX.
[n] N. R. Lobanov and D. C. Weisser, “Status Report on RFSC ANU”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper TUP002, pp. 124-128.
[n] P. Mandrillon, R. Ostojic, and G. Ryckewaert, “Magnet Design Studies for the European Light Ion Medical Accelerator”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1777-1780.
[n] J. S. Nielsen, N. Hertel, and S. P. M?©ller, “An Overview of the Proposed Beam Diagnostic for ASTRID2”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper MOPD24, pp. 101-103.
[n] H. Saito et al., “Crossed-Undulator Configuration for Variable Polarized THz Source”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 69-72. doi:10.18429/JACoW-FEL2019-TUP014
[n] M. Yamamoto et al., “Longitudinal Emittance Control and Beam Loading Effects on Proton Synchrotrons in JAERI-KEK Joint Project”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH030, pp. 2917-2919.
[n] L. J. Allen, C. D. Curtis, and B. M. Hanna, “Loss Monitors for the Fermilab Linac”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper B07, pp. 53-55.
[n] B. Goddard et al., “Beam Commissioning of the SPS LSS4 Extraction and the TT40 Transfer Line”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT017, pp. 569-571.
For LaTeX
Use Complete Form
For BibTeX
References
- H. Gaiser, K. Kaspar, U. Ratzinger, S. Minaev, and B. Krietenstein, “Status of the 36 MHz Linac Cavities for the GSI High Current Injector”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA70, pp. 3552-3554.
- M. Bickley, P. Chevtsov, and T. Larrieu, “Device Configuration Handler for Accelerator Control Applications at Jefferson Lab”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP584, pp. XX-XX.
- E. Laface, “On Coordinate Systems in Beam Dynamics”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 243-246.
- V. M. Borin et al., “The Logitudinal Broadband Impedance and Energy Spread Measurements at the VEPP-4M Electron-Positron Collider”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3117-3119.
- K. Kumagai, N. Kumagai, K. Soutome, H. Tanaka, and C. Zhang, “Development and Installation of Skew Quadrupole Magnets for SPring-8 Storage Ring”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP4A03, pp. 2104-2106.
- J. Bahng, B. H. Choi, D. S. Kim, and E.-S. Kim, “Development of RFQ for BNCT Accelerator”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4260-4262.
- Y.-H. Liu, Y.-C. Chung, C. K. Kuan, and Z.-D. Tsai, “The Data Acquisition System and Inspection Equipment on Vibration Evaluation for Deionized and Cooling Water Pumps in TPS”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3568-3570.
- N. R. Lobanov and D. C. Weisser, “Nb Sputter Coating on QWR in ANU”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97D36, pp. 1125-1155.
- J. L. Gonzalez, T. B. Bogey, C. Deplano, and J.-J. Savioz, “Development of a High Dynamic Range Beam Position Measurement System Using Logarithmic Amplifiers for the SPS at CERN”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPC18, pp. 89-92.
- O. B. van Dyck, “An 800-MeV Spin Precessor for Polarized H- Beams using H- to Ho Stripping”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3992-3995.
- M. Camarda et al., “Towards Full Silicon 4H-SiC Based X-Ray Beam Monitoring”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 665-668.
- S. R. Mane, “Space-Charge Effets in the Fermilab Main Ring at 8 GeV”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1804-1806.
- G. B. Shen, M. R. Kraimer, and L. Yang, “Prototype of Beam Commissioning Environment and its Applications for NSLS-II”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEB026, pp. 2740-2742.
- D. K. Desjardins, A. C. Carcy, J. L. Giorgetta, C. Menneglier, M. Scheel, and T. Weitkamp, “Design of Indirect X-Ray Detectors for Tomography on the Anatomix Beamline”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 355-357.
- J. Pflueger, “Insertion Devices For 4th Generation Light Sources”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUAR3, pp. 157-161.
- N. Kamikubota et al., “Updates on J-PARC MR Control Over the Last One Decade”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, paper WEPHA076, pp. XX-XX.
- N. R. Lobanov and D. C. Weisser, “Status Report on RFSC ANU”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper TUP002, pp. 124-128.
- P. Mandrillon, R. Ostojic, and G. Ryckewaert, “Magnet Design Studies for the European Light Ion Medical Accelerator”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1777-1780.
- J. S. Nielsen, N. Hertel, and S. P. M?©ller, “An Overview of the Proposed Beam Diagnostic for ASTRID2”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper MOPD24, pp. 101-103.
- H. Saito et al., “Crossed-Undulator Configuration for Variable Polarized THz Source”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 69-72.
- M. Yamamoto et al., “Longitudinal Emittance Control and Beam Loading Effects on Proton Synchrotrons in JAERI-KEK Joint Project”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH030, pp. 2917-2919.
- L. J. Allen, C. D. Curtis, and B. M. Hanna, “Loss Monitors for the Fermilab Linac”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper B07, pp. 53-55.
- B. Goddard et al., “Beam Commissioning of the SPS LSS4 Extraction and the TT40 Transfer Line”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT017, pp. 569-571.
Back to search