Favourites
For Word
[n] A. McElderry, B. Billett, J. A. Carter, and O. K. Mulvany, “Vacuum Pumping Crosses and Keyhole Vacuum Chambers for the APS-Upgrade Storage Ring Vacuum System”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 85. doi:10.18429/JACoW-MEDSI2020-MOPC14
[n] C. Sydlo et al., “Femtosecond Timing Distribution at the European XFEL”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 669-671. doi:10.18429/JACoW-FEL2015-WEP047
[n] M. Wilcox, “European Industry's Potential Capabilities for High Power RF Systems for the Future IlC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THIBKI05, pp. 2693-2695.
[n] I. A. Koop et al., “Concept for a Polarised Electron-Proton Collider with 15-30 GeV c.m. Energy and 1033 cm-2s-1 Luminosity”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH043, pp. 3320-3322.
[n] E. Meller, C. R. Dunnam, and D. C. Sagan, “Beam Position Monitors for the CESR Linac”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1468-1471.
[n] H. Schlarb et al., “First Operation of the FLASH Machine Protection System with Long Bunch Trains”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper TUP009, pp. 262-264.
[n] S. Takagi, H. Hara, and N. Shigeoka, “Unusual electron emission characteristics of CeB6 cathodes”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 652-655. doi:10.18429/JACoW-IPAC2024-MOPR84
[n] Yu. S. Fedotov, E. A. Myae, A. A. Asseev, and S. V. Sokolov, “Increase a Bent Crystal Extraction Efficiency by Means of Thin Internal Target”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 318-320.
[n] J. K. Boyd, G. J. Caporaso, A. G. Cole, and J. T. Weir, “Beam Quality of the ATA Injector”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 925-928.
[n] N. Sakamoto et al., “RF Sytem for Heavy Ion Cyclotrons at RIKEN RIBF”, in Proc. HIAT'09, Venice, Italy, Jun. 2009, paper TU-10, pp. 69-73.
[n] B. Podobedov et al., “X-ray beam position monitor with pixelated GaAs detectors for high-power synchrotron radiation beams”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPS064, unpublished.
[n] H. Herminghaus and U. Ludwig-Mertin, “The Design of the End Magnets for the Third Stage of MAMI”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper TUP0041, pp. 203-205.
[n] E. B. Anderson, T. I. Banks, and J. T. Rogers, “ODYSSEUS: Description of and Results from a Strong-Strong Beam-Beam Simulation for Storage Rings”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP89, pp. 1686-1688.
[n] H. Herminghaus, K.-H. Kaiser, and U. Ludwig-Mertin, “The Design of Double Sided Microtrons”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper H02, pp. 260-262.
For LaTeX
Use Complete Form
For BibTeX
References
- A. McElderry, B. Billett, J. A. Carter, and O. K. Mulvany, “Vacuum Pumping Crosses and Keyhole Vacuum Chambers for the APS-Upgrade Storage Ring Vacuum System”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 85.
- C. Sydlo et al., “Femtosecond Timing Distribution at the European XFEL”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 669-671.
- M. Wilcox, “European Industry's Potential Capabilities for High Power RF Systems for the Future IlC”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THIBKI05, pp. 2693-2695.
- I. A. Koop et al., “Concept for a Polarised Electron-Proton Collider with 15-30 GeV c.m. Energy and 1033 cm-2s-1 Luminosity”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH043, pp. 3320-3322.
- E. Meller, C. R. Dunnam, and D. C. Sagan, “Beam Position Monitors for the CESR Linac”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1468-1471.
- H. Schlarb et al., “First Operation of the FLASH Machine Protection System with Long Bunch Trains”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper TUP009, pp. 262-264.
- S. Takagi, H. Hara, and N. Shigeoka, “Unusual electron emission characteristics of CeB6 cathodes”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPR84, pp. 652-655.
- Yu. S. Fedotov, E. A. Myae, A. A. Asseev, and S. V. Sokolov, “Increase a Bent Crystal Extraction Efficiency by Means of Thin Internal Target”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 318-320.
- J. K. Boyd, G. J. Caporaso, A. G. Cole, and J. T. Weir, “Beam Quality of the ATA Injector”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 925-928.
- N. Sakamoto et al., “RF Sytem for Heavy Ion Cyclotrons at RIKEN RIBF”, in Proc. 11th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'09), Venice, Italy, Jun. 2009, paper TU-10, pp. 69-73.
- B. Podobedov et al., “X-ray beam position monitor with pixelated GaAs detectors for high-power synchrotron radiation beams”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS064, this conference.
- H. Herminghaus and U. Ludwig-Mertin, “The Design of the End Magnets for the Third Stage of MAMI”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper TUP0041, pp. 203-205.
- E. B. Anderson, T. I. Banks, and J. T. Rogers, “ODYSSEUS: Description of and Results from a Strong-Strong Beam-Beam Simulation for Storage Rings”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUP89, pp. 1686-1688.
- H. Herminghaus, K.-H. Kaiser, and U. Ludwig-Mertin, “The Design of Double Sided Microtrons”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper H02, pp. 260-262.
Back to search