JaCoW Logo

Reference Search

Warning
Some papers have malformed authors, please correct this before using these references.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	J. Dooling et al., “Photocathode drive laser upgrade for the Advanced Photon Source linac”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 63-66. doi:10.18429/JACoW-LINAC2024-MOPB008
[n]	Y. Miyahara and M. Y. Lin, “”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 481-484. 
[n]	J. A. Uythoven et al., “Experience with the LHC Beam Dump Post-Operational Checks System”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP029, pp. 1599-1601. 
[n]	J. Kamenik, “Management System Based on Open Source Tools”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper O3_010. 
[n]	M. Lieuvin, “Invited Paper: Status of SPIRAL, the Radioactive Beam Project at GANIL”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper M-04, pp. 651-658. 
[n]	M. Plesko and F. Amand, “Recent Highlights from Cosylab”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper TCO103, pp. 132-134. 
[n]	W. Liu et al., “Advancements in the development of beam dynamics software APES for CEPC”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper WECD2, unpublished. 
[n]	S. H. Liu, Y. He, and Z. J. Wang, “DESIGN STUDIES OF THE C-ADS MAIN LINAC WITH ONLY SPOKE CAVITIES”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWA025, pp. 1781-1783. 
[n]	M. Galonska, E. Feldmeier, Th. Haberer, A. Peters, and C. Schoemers, “Multi-Energy Trial Operation of the HIT Medical Synchrotron: Accelerator Model and Data Supply”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4644-4646. doi:10.18429/JACoW-IPAC2017-THPVA082
[n]	D. Haas, S. A. Chilingaryan, A. Kopmann, W. Mexner, and D. Ressmann, “ADEI and Tango Archiving System ÔÇô A Convenient Way to Archive and Represent Data”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper FPO026, pp. 210-212. 
[n]	S. Friederich and K. Aulenbacher, “Test electron source for increased brightness emission by near band gap photoemission”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1512-1514. doi:10.18429/JACoW-IPAC2015-TUPWA044
[n]	A. V. Mishin, “Multiple Beam Coupled Cavity Concept and Structure”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP120G, pp. 816-818. 
[n]	N. Hu, Z. H. Bai, W. Li, Q. Luo, and L. Wang, “Estimates of Collective Effects in the HALS Storage Ring Having the First Version Lattice”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3770-3773. doi:10.18429/JACoW-IPAC2017-THPAB032
[n]	A. T. Young, P. Chen, W. B. Kunkel, K. N. Leung, C. Y. Li, and J. Watson, “Quantum Yield Measurements of Photocathodes Illuminated by Pulsed Ultraviolet Laser Radiation”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1993-1996. 
[n]	J. Bernardini et al., “Final Design of the Pre-Production SSR2 Cryomodule for PIP-II Project at Fermilab”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 511-514. doi:10.18429/JACoW-LINAC2022-TUPOGE12
[n]	M. Ball, B. Hamilton, Wm. Manwaring, and T. Sloan, “Initial Performance of the IUCF Cooler Injector Synchrotron”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THCL1, pp. 498-502. 
[n]	G. Harris, Q. Ma, and D. R. Walters, “Coatings for the APS RF Cavity Tuners for the Reduction of Secondary Electrons”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA115, pp. 1342-1344. 
[n]	Y. P. Wu et al., “Experimental Demonstration of Energy-Chirp Reduction by a Plasma Dechirper”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1258-1260. doi:10.18429/JACoW-IPAC2017-TUOBB1
[n]	G. Fernqvist, M. C. Bastos, A. Cantone, and Q. King, “Developments in High-precision Aspects of Power Converter Control for LHC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN070, pp. 314-316. 
[n]	C. Zamantzas, M. Alsdorf, B. Dehning, S. Jackson, M. Kwiatkowski, and W. Vigano, “System Architecture for Measuring and Monitoring Beam Losses in the Injector Complex at CERN”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUPA09, pp. 347-350. 
[n]	C. Leemann and C. G. Yao, “A Highly Effective Deflecting Structure”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO465, pp. 232-234. 
[n]	A. Garonna et al., “Coupling of Cyclotrons to Linacs for Medical Applications”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 114-117. doi:10.18429/JACoW-Cyclotrons2016-MOE01
[n]	J. S. Chai, J. H. Ha, H. Y. Lee, Y. S. Kim, S. Oh, and M. Yoon, “New Design and Development of 13 MeV PET Cyclotron in Korea”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP80, pp. 3137-3139. 
[n]	J. V. Cresswell, D. R. Heywood, D. P. Gurd, R. R. Johnson, and W. K. Lacey, “The TRIUMF Control System”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 476-485. 
[n]	S. B. Leith, X. Jiang, R. Ries, E. Seiler, and M. Vogel, “Deposition Parameter Effects on Niobium Nitride (NbN) Thin Films Deposited Onto Copper Substrates with DC Magnetron Sputtering”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 945-949. doi:10.18429/JACoW-SRF2019-THP043
[n]	T. Satogata et al., “RHIC BPM System Performance, Upgrades, and Tools”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI102, pp. 1963-1965. 
[n]	D. Shu et al., “Mechanical Design of Compact Vertical and Horizontal Linear Nanopositioning Flexure Stages With Centimeter-Level Travel Range for X-Ray Beamline Instrumentation”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4096-4099. doi:10.18429/JACoW-IPAC2017-THPAB154
[n]	Y. S. Qiao, G. Lei, and Z. Zhao, “The Study of Accelerator Data Archiving and Retrieving Software”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4007-4009. doi:10.18429/JACoW-IPAC2017-THPAB121
[n]	V. S. Yu, C. E. Hansel, G. E. Lawler, J. I. Mann, M. Mills, and J. B. Rosenzweig, “Magneto-Optical Trap Cathode for High Brightness Applications”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4466-4469. doi:10.18429/JACoW-IPAC2021-THPAB344
[n]	G. H. Wei et al., “Complete Beam Dynamics of the JLEIC Ion Collider Ring Including Imperfections, Corrections, and Detector Solenoid Effects”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 57-60. doi:10.18429/JACoW-NAPAC2016-MOA4CO03
[n]	J. Marcos, A. Fontanet, J. R. García, and R. Monge, “Insertion devices for the ultralow emittance storage ring ALBA II”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPB047, unpublished. 
[n]	S. L. Birch, A. Nordt, and D. Paulic, “Personnel Safety Systems for the European Spallation Source”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1036-1038. doi:10.18429/JACoW-IPAC2015-MOPTY046
[n]	D. Longuevergne et al., “A Cold Tuner System With Mobile Plunger”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THIOD04, pp. 884-888. 
[n]	O. Piquet et al., “The Radiofrequency Quadrupole Accelerator for the Linac4”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper MOP040, pp. 157-159. 
[n]	S. V. Cao, M. L. Friend, M. Hartz, A. Nakamura, and K. Sakashita, “Development of a Beam Induced Fluorescence Monitor for Non-Destructively Profiling MW Proton Beam at the J-PARC Neutrino Beamline”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 358-362. doi:10.18429/JACoW-IBIC2019-TUPP024
[n]	A. C. Caruso, G. Gallo, A. Longhitano, F. Consoli, P. Z. Li, and J. Sura, “The New Axial Buncher at INFN-LNS”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TU2PB02, pp. 147-149. 
[n]	R. Maier, B. Seligmann, and H. J. Stein, “Electron Cooling in COSY-Juelich”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1580-1583. 
[n]	Q. S. Shu et al., “High Power Coupler for the TESLA Superstructure Cavities”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPT051, pp. 3141-3143. 
[n]	R. Winje and K. Bourkland, “A 110 kA Rapid-Pulsing Power Supply”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1242-1247. 
[n]	B. Vacaliuc et al., “Experiment Automation with a Robot Arm Using the Liquids Reflectometer Instrument at the Spallation Neutron Source”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC077, pp. 759-762. 
[n]	B. Bernstein and I. Smith, “Aurora, an Electron Accelerator”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 294-301. 
[n]	L. G. Goralczyk, A. F. Kostopoulos, B. Schofield, and J-C. Tournier, “CERN SCADA Systems 2020 Large Upgrade Campaign Retrospective”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 156-160. doi:10.18429/JACoW-ICALEPCS2021-MOPV017
[n]	E. W. Hoffman, “An Innovative Spin Precessor for Intermediate Energy Protons”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3995-3997. 
[n]	M. Fedorov et al., “Status of the National Ignition Facility (NIF) Integrated Computer Control and Information Systems”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 9-13. doi:10.18429/JACoW-ICALEPCS2021-MOAL02
[n]	L. Elementi et al., “Mu2e AC Dipole 300 kHz and 5.1 MHz Tests and Comparison of Nickel-Zinc Ferrites”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD017, pp. 3533-3535. 
[n]	T. B. Bolshakov and E. S. McCrory, “Portable SDA (Sequenced Data Acquisition) with a Native XML Database”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH128, pp. 3101-3103. 
[n]	K. Saito et al., “Superiority of Electropolishing over Chemical Polishing on High Gradients”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97D02, pp. 795-813. 
[n]	R. K. Agrawal, A. M. Gupta, B. Merh, P. Fatnani, and S. Gangopadhyay, “Software Scenario for Control System of INDUS-2”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper O3_014. 
[n]	P. H. Yang, Z. H. Bai, and L. Wang, “Preliminary Study of a Nine-Bend Achromat Lattice for a Diffraction-Limited Storage Ring”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3600-3602. doi:10.18429/JACoW-IPAC2018-THPAK148
[n]	O. Berrig, C. Fischer, and H. Schmickler Geneva, “Measuring Beta-Functions with K-Modulation”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper CT08, pp. XX-XX. 
[n]	T. J. P. Ellison, “Beam Diagnosis for Unmeasurably Cold Beams (Invited Paper)”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper VII-02, pp. 274-281. 
[n]	P. N. Koufalis and M. Liepe, “Insights into the Role of C, N, and O Introduced by Low Temperature Baking on Niobium Cavity Performance”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2455-2457. doi:10.18429/JACoW-IPAC2018-WEPMF041
[n]	Y. Kitagawa et al., “Inverse Compton Scattering by Laser Accelerated Electrons and its Application to Standoff Detection of Hidden Objects”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD054, pp. 4404-4406. 
[n]	P. Puppel, U. Ratzinger, and P. J. Spiller, “Simulation of the Long Term Beam Intensity Performance of the NEG-coated SIS18”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper MOPD16, pp. 91-95. 
[n]	A. M. Kozodaev, N. V. Lazarev, D. A. Liakin, A. M. Raskopin, and V. S. Skachkov, “Simulation of Proton Beam Behaviour in High Energy Linac with Few-Gaps Resonators at Failure of One or Some of Them”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP4B02, pp. 830-832. 
[n]	J. S. Kolski et al., “Diagnostic Pulse for Single-particle-like Beam Position Measurements During Accumulation/Production Mode in the Los Alamos Proton Storage Ring”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP097, pp. 3960-3962. 
[n]	S. Braccini, C. Belver-Aguilar, T. S. Carzaniga, G. Dellepiane, P. Haeffner, and P. Scampoli, “Novel Irradiation Methods for Theranostic Radioisotope Production With Solid Targets at the Bern Medical Cyclotron”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 127-131. doi:10.18429/JACoW-CYCLOTRONS2019-TUA02
[n]	W. Busse, “Status of the VICKSI Tandem Injector Project”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper E02, pp. 230-232. 
[n]	A. Markovik, K. Floettmann, G. P?Âplau, and U. van Rienen, “Simulation of 3D Space-charge Fields of Bunches in a Beam Pipe of Elliptical Shape”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH120, pp. 2200-2202. 
[n]	P. Chitnis, T. G. Robertazzi, and K. A. Brown, “Understanding the Failure Characteristics of the Beam Permit System of RHIC at BNL”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 382-385. doi:10.18429/JACoW-ICALEPCS2015-MOPGF129
[n]	F. O. Purser, F. J. Humphry, and J. M. Potter, “Practical Aspects of Tuning a Ringed RFQ”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper TUP0011, pp. 115-117. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search