JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	S. Yamamoto, “Development of Very Short Period Undulators”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1735-1739. doi:10.18429/JACoW-IPAC2018-WEXGBD1
[n]	A. Fertman et al., “Measurement of Activation Induced by an Argon Beam in a Copper Target at the SIS18”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT105, pp. 1399-1401. 
[n]	A. Barry, B. Bowling, J. Kewisch, and J. Tang, “Orbit Correction Techniques for a Multipass Linac”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU450, pp. 444-446. 
[n]	E. Khabibullina et al., “Development of the Ion Beams HIPR-1 Transport Channel for Ion Energy Losses Measurement in Plasma Target”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 276-278. doi:10.18429/JACoW-RUPAC2018-TUPSA61
[n]	Yu. D. Kliuchevskaia, S. M. Polozov, A. Aryshev, M. Shevelev, N. Terunuma, and J. Urakawa, “Pre-bunched Electron Beam Emittance Simulation and Measurement”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1864-1866. doi:10.18429/JACoW-IPAC2016-TUPOW045
[n]	S. Jolly, J. J. Back, D. C. Faircloth, A. P. Letchford, J. K. Pozimski, and P. Savage, “LEBT Simulations and Ion Source Beam Measurements for the Front End Test Stand (FETS)”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS090, pp. 1714-1716. 
[n]	C. M. Pierce et al., “Understanding and Compensating Emittance Diluting Effects in Highly Optimized Ultrafast Electron Diffraction Beamlines”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3004-3006. doi:10.18429/JACoW-IPAC2018-THPAF024
[n]	H. R?Âcken, M. Abdel-Bary, E. M. Akcoeltekin, P. Budz, T. Stephani, and J. C. Wittschen, “The VARIAN 250 MeV Superconducting Compact Proton Cyclotron: Medical Operation of the 2nd Machine, Production and Commissioning Status of Machines No. 3 to 7”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper TUM1CCO04, pp. 283-285. 
[n]	Ya. V. Shashkov and A. Orlov, “Macros for Identification of Higher Order Modes Types, Their Transverse Shunt Impedance and Kick Factor”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2220-2223. doi:10.18429/JACoW-IPAC2016-WEPMB048
[n]	E. H. Maclean et al., “Non-linear Chromaticity Studies of the LHC at Injection”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC078, pp. 2199-2201. 
[n]	H. Li et al., “RF Test of ESS Superconducting Spoke Cavities at Uppsala University”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2227-2229. doi:10.18429/JACoW-IPAC2016-WEPMB050
[n]	M. Jensen et al., “Status of the Diamond Storage Ring Radio Frequency System”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH164, pp. 445-447. 
[n]	S. Fukuda et al., “Development of a High-Power VHF Klystron for JHF”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D015, pp. 112-114. 
[n]	M. Apollonio, A. Vorozhtsov, P. Tavares, A. Andersson, and J. Breunlin, “First results of the multipole injection kicker in the MAX IV 1.5 GeV ring”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 994-997. doi:10.18429/JACoW-IPAC2023-MOPM011
[n]	R. Keller, “Innovations in Ion Sources and Injectors”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper WE2-2, pp. 232-236. 
[n]	L. Martin, S. L. Sheehy, K. Ito, H. Okamoto, D. J. Kelliher, and S. Machida, “A new method to measure the Beta function in a Paul trap”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3262-3265. doi:10.18429/JACoW-IPAC2018-THPAK024
[n]	A. V. Samoshin and S. M. Polozov, “Development of Proton Therapy at the SC Linac with BEAMDULAC-SCL Code”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper TUPB070, pp. 633-635. 
[n]	G. Valentino et al., “Upgraded Control System for LHC Beam-Based Collimator Alignment”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 306-309. doi:10.18429/JACoW-ICALEPCS2015-MOPGF099
[n]	S. A. Samant and S. Krishnagopal, “Stability analysis of Free-Electron Laser Resonators”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPE012, pp. 2170-2172. 
[n]	H. Saugnac et al., “CRYHOLAB, A New Horizontal Test Cryostat for SCRF Cavities”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper WEP025, pp. 478-480. 
[n]	S. V. Matsievskiy and V. I. Kaminskiy, “Traveling Wave Accelerating Structure Power Input Calculation With Equivalent Circuit Method”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 864-866. doi:10.18429/JACoW-LINAC2016-THPLR011
[n]	T. Magome, H. Hanaki, T. Kobayashi, S. Suzuki, and T. Taniuchi, “Identification of Emitting Sources of Dark Currents From Gridded Thermionic Electron Gun and Measures to Suppress Dark Currents From Electron Gun in SPring-8 Linear Accelerator”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 888-890. doi:10.18429/JACoW-LINAC2016-THPLR021
[n]	R. Modic, M. Pavleski, T. Zagar, J. Belmans, P. Della Faille, and D. Vandeplassche, “MYRRHA Control System Development”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4823-4825. doi:10.18429/JACoW-IPAC2018-THPML075
[n]	F. C. Zhao et al., “Superconducting Elliptical Cavity (beta=0.45) and SRF Test Facility in IHEP”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP85, pp. XX-XX. 
[n]	R. Miyamoto et al., “Dynamics of Bunches Partially Chopped with the MEBT Chopper in the ESS Linac”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP039, pp. 146-148. 
[n]	W. Qin et al., “Start-to-End Simulations for the Soft X-Ray FEL at the MAX IV Laboratory”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 210-213. doi:10.18429/JACoW-FEL2019-TUP066
[n]	T. T. Arkan et al., “200 MV Record Voltage of vCM and LCLS-II-HE Cryomodules Production Start Fermilab”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 95-97. doi:10.18429/JACoW-LINAC2022-MOPOPA13
[n]	A. Schempp, H. Deitinghoff, H. Klein, C. Herrlander, A. K?ñllberg, and A. Soltan, “The Cryring RFQ”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-13, pp. 70-72. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search