JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	W. T. Weng, “The Lattice Design and Tolerance Analysis of the CBA Transport Line”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2463-2466. 
[n]	U. Wienands et al., “The Vacuum System for the PEP II High Energy Ring Straight Sections”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAA22, pp. 2129-2131. 
[n]	W. H. Li, I. V. Bazarov, C. M. Gulliford, and J. M. Maxson, “Novel Photocathode Geometry Optimization: Field Enhancing Photoemission Tips”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1605-1608. doi:10.18429/JACoW-IPAC2018-TUPML029
[n]	I. Will, “Drive Lasers for Photoinjectors”, in Proc. ERL'07, Daresbury, UK, May 2007, paper 13, pp. XX-XX. 
[n]	M. Jensen et al., “Operational Experience of Diamond`s Superconducting Cavities”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper TUPPO019, pp. 228-230. 
[n]	J. G. De Villiers et al., “Numerical Orbit Tracking in 3D Through the Injector Cyclotron for Heavy Ions at iThemba LABS”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 71-74. doi:10.18429/JACoW-Cyclotrons2016-MOP10
[n]	S. Ohnuma and R. L. Gluckstern, “Width of Nonlinear Difference Resonances”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2261-2264. 
[n]	J. M. Brennan et al., “Design of Ferrite Loaded High Voltage Barrier Cavity”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP22G, pp. 1829-1831. 
[n]	K. C. D. Chan et al., “Progress of APT Superconducting Linac Engineering Development”, presented at the LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4097, unpublished. 
[n]	J. Brossard et al., “Low Energy Beam Measurements Using PHIL Accelerator at LAL, Comparison with PARMELA Simulations”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP210, pp. 1885-1887. 
[n]	C. A. Martins, G. G?Âransson, M. Kalafatic, and M. Collins, “Pulsed High Power Klystron Modulators for ESS Linac Based on the Stacked Multi-Level Topology”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 359-362. doi:10.18429/JACoW-LINAC2016-TU2A02
[n]	C. Yao, Y.-C. Chae, S. H. Kim, L. H. Morrison, and H. Shang, “Development of a Horizontal Drive Stripline for the APS Transverse Feedback System”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper TUPG046, pp. 228-230. 
[n]	E. F. Parker, “Recent Measurement of the ZGS Injector Beam Characteristics”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper C03, pp. 63-66. 
[n]	J. Dietrich et al., “Beam Diagnostics at COSY-Juelich”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1088-1091. 
[n]	M. Alkadi, C. Bruni, M. El Khaldi, M. Jacquet, and H. Monard, “Electromagnetic and Beam Dynamics Studies of the ThomX LINAC”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2721-2724. doi:10.18429/JACoW-IPAC2021-WEPAB054
[n]	S. A. Antipov, A. Didenko, V. A. Lebedev, and A. Valishev, “Stripline Kicker for Integrable Optics Test Accelerator”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3390-3392. doi:10.18429/JACoW-IPAC2015-WEPTY051
[n]	C. Christou et al., “Commissioning of the Hybrid Superconducting/Normal Conducting RF System in the Diamond Storage Ring”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4042-4045. doi:10.18429/JACoW-IPAC2018-THPMF007
[n]	V. Serriere et al., “352.2 MHz HOM Damped Normal Conducting ESRF Cavity: Design and Fabrication”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC004, pp. 68-70. 
[n]	A. Y. Molodozhentsev, A. Ando, T. Koseki, M. J. Shirakata, J. Takano, and M. Tomizawa, “Study of the Beam Dynamics for the 'Fast Extraction' Operating Scenario of the J-PARC Main Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD009, pp. 1937-1939. 
[n]	R. A. Marsh, S. G. Anderson, D. J. Gibson, J. Hall, and B. Rusnak, “Fluorescence-Based Imaging Diagnostic for High Average Power Deuteron Beam”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2777-2779. doi:10.18429/JACoW-IPAC2019-WEPGW120
[n]	P. Duval, P. K. Bartkiewicz, S. W. Herb, S. Weisse, and H. Wu, “TINE Release 4 in Operation”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper MOX01, pp. XX-XX. 
[n]	S. E. Karnaev, E. V. Goman, O. A. Plotnikova, and E. A. Simonov, “The Database of the VEPP-4 Accelerating Facility Parameters”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper MOW04, pp. 40-42. 
[n]	F. Furuta et al., “Vertical Electropolishing Studies at Cornell with KEK and Marui”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2295-2297. doi:10.18429/JACoW-IPAC2016-WEPMR016
[n]	U. Krause et al., “Integration of Renovated Networking Middleware into a Running Control System Environment”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper MOW03, pp. 37-39. 
[n]	D. T. Fourie et al., “Non-Destructive Beam Position Measurement in a Proton Therapy Beam Line”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper MOPD01, pp. 41-43. 
[n]	K. Breymayer et al., “SLAC Control Room Consolidation Using Linked Computers”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 409-412. 
[n]	I. Chaikovska, C. Bruni, S. Chanc?®, A. R. Gamelin, H. Monard, and A. Loulergue, “Status of the Preparation to the Commissioning of the ThomX Storage Ring”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 833-836. doi:10.18429/JACoW-IPAC2016-MOPOW052
[n]	S. A. Antipov, P. Adamson, S. Nagaitsev, and M.-J. Yang, “Study of Fast Instability in Fermilab Recycler”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1728-1730. doi:10.18429/JACoW-IPAC2016-TUPOR029
[n]	A. Gotz, M. W. Gerring, O. Svensson, and S. Brockhauser, “Data Analysis Workbench”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKS019, pp. 823-826. 
[n]	B. Hendricks, R. P. Johnson, R. Joshel, E. Martensson, and D. Siergiej, “The Tevatron Orbit Program”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1293-1296. 
[n]	A. Y. Molodozhentsev, T. Koseki, and M. Tomizawa, “Space Charge Effects for JPARC Main Ring”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN039, pp. 3315-3317. 
[n]	A. Ratti et al., “Using the BRAN Luminosity Detectors for Beam Emittance Monitoring During LHC Physics Runs”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR076, pp. 966-968. 
[n]	L. Cooley et al., “Analyses of Defects in the Heat Affected Zone of Welded Niobium Coupons”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP057, pp. 956-956. 
[n]	J. A. Gore et al., “A FPGA Based High Speed Data Acquisition Card”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper FRCC02, pp. 271-273. 
[n]	O. Holme, D. R. S. Di Calafiori, G. Dissertori, W. Lustermann, and S. Zelepoukine, “Maintaining an Effective and Efficient Control System for the Electromagnetic Calorimeter of the Compact Muon Solenoid Experiment During Long-term CERN Large Hadron Collider Operations”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper FRCB01, pp. 254-256. 
[n]	S. U. De Silva and J. R. Delayen, “Design and Development of Superconducting Parallel-bar Deflecting/Crabbing Cavities”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC102, pp. 2453-2455. 
[n]	M. El Khaldi, M. Alkadi, C. Bruni, L. Garolfi, A. Gonnin, and H. Monard, “Design Study of High Gradient Compact S-band TW Accelerating Structure for the ThomX LINAC Upgrade”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2807-2810. doi:10.18429/JACoW-IPAC2019-WEPRB008
[n]	R. Avery et al., “The Era 4 MeV Injector”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 479-484. 
[n]	Y.-G. Song, Y.-S. Cho, J.-H. Jang, and H.-J. Kwon, “Development of the Control System for PEFP 100-MeV Proton Linear Accelerator”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper FRCB02, pp. 257-259. 
[n]	H. L. Rutkowski et al., “The Berkeley 2MV Heavy Ion Fusion Injector”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 959-962. 
[n]	W. H. Cheng, A. V. Fedotov, and R. L. Gluckstern, “Frequency Dependence of the Polarizability and Susceptibility of a Circular Hole in a Thick Conducting Wall”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPR12, pp. 3266-3268. 
[n]	C. Christou and V. C. Kempson, “Operation of the Diamond Light Source Injector”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN086, pp. 1112-1114. 
[n]	B. Tang et al., “The Progress of the BRISOL Facility at CIAE”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI027, pp. 339-341. 
[n]	D. Shu, J. W. J. Anton, S. P. Kearney, A. Li, C. Mao, and Y. Pan, “Precision Mechanical Design of a Miniature Dynamic Mirror Bender for the SSRF Beamline Upgrade Project”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 108-111. doi:10.18429/JACoW-MEDSI2016-TUAA01
[n]	L. O. Dallin and M. S. de Jong, “Coherent Synchrotron Radiation Production at the Canadian Light Source”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5RFP017, pp. 1126-1128. 
[n]	C. Curtis, “Ion Source and Injector Development”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper D01, pp. 179-188. 
[n]	H. A. Day, R. M. Jones, F. Caspers, E. Métral, and B. Salvant, “Comparison of the Current LHC Collimators and the SLAC Phase 2 Collimator Impedances”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS080, pp. 790-792. 
[n]	D. Kostin et al., “S1-Global Module Tests at STF/KEK”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOODA02, pp. 38-40. 
[n]	B. Jeram, G. Chiozzi, R. J. Tobar, R. Amestica, and M. Watanabe, “Reimplementing the Bulk Data System with DDS in ALMA ACS”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUCOCB08, pp. 969-973. 
[n]	F. Voelker and G. Lambertson, “Beam Impedance of Ferrite Kicker Magnets”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 851-854. 
[n]	J. L. Conradie et al., “Improvements To The Ithemba Labs Cyclotron Facilities”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 140-142. 
[n]	P. Yamin, “IBCM: Internal Bunch Coordinate Monitor”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 603-605. 
[n]	R. Valdiviez, L. Earley, R. P. LaFave, F. Martinez, D. Nguyen, and A. Rendon, “The High-Heat Flux Testing of an Interceptive Device for an Intense Proton Beam”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH044, pp. 1321-1323. 
[n]	C. C. Friedrichs, B. M. Campbell, and L. Walling, “Design of an Accelerating Cavity for the Superconducting Super Collider Low-Energy Booster”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1020-1023. 
[n]	M. Wedekind et al., “IUCF High Intensity Polarized Ion Source”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1922-1925. 
[n]	H. Gassot, S. Bousson, G. Olry, and S. Rousselot, “Low- Triple Spoke Cavity Design Improvement for Proton Linac”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO039, pp. 177-179. 
[n]	C. Hovater et al., “The LCLS-II LLRF System”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1195-1197. doi:10.18429/JACoW-IPAC2015-MOPWI021
[n]	D. Shu et al., “Mechanical Design of Compact Vertical and Horizontal Linear Nanopositioning Flexure Stages With Centimeter-Level Travel Range for X-Ray Beamline Instrumentation”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4096-4099. doi:10.18429/JACoW-IPAC2017-THPAB154
[n]	J. T. Keane and A. J. McNerney, “Experimental Results on the RCA 7835, and Initial Operating Parameters of the FTH 515”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper IV-08, pp. 183-190. 
[n]	F. Chautard et al., “GANIL Operation Status and Upgrade of SPIRAL1”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper PO02, pp. 51-53. 
[n]	G. Sattonnay et al., “Is it Possible to Use Additive Manufacturing for Accelerator UHV Beam Pipes?”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2240-2243. doi:10.18429/JACoW-IPAC2019-WEXXPLS3
[n]	N. Cutic, F. Lindau, E. Mansten, and S. Werin, “On-Line Arrival Time and Jitter Measurements Using Electro-Optical Spectral Decoding”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper THOA4, pp. 548-551. 
[n]	V. Granatstein, W. Lawson, and A. Mondelli, “A Review of Gyroklystrons and a Cost Estimate for a Gyroklystron-Driven Supercollider”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH2-01, pp. 503-507. 
[n]	K. Zagar et al., “ACS - Overview of Technical Features”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP704, pp. XX-XX. 
[n]	R. Bossart, J. Bosser, L. Burnod, A. Chapman-Hatchett, E. D, and P. Mills, “The SPS Beam Instrumentation and Closed Orbit Correction”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1733-1736. 
[n]	J. R. Boyce, W. Brown, D. Douglas, F. Hartemann, and H. Toyokawa, “Sub-Picosecond, High Flux, Thomson X-Ray Sources at Jefferson Lab's High Power FEL”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB055, pp. 938-940. 
[n]	M. Abs et al., “The IBA PET-Dedicated Cyclotrons: Main Features and Improvements”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper C-05, pp. 120-123. 
[n]	N. Angert et al., “Commissioning and First Operation Experience of the New Heavy Ion Injector of the UNILAC”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 167-170. 
[n]	C. K. Kim and C. D. Park, “Vacuum Performance of PLS Electron Storage Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP078L, pp. 2521-2523. 
[n]	P. Lebasque, R. Ben El Fekih, M. Bol, J.-P. Lavieville, A. Loulergue, and D. Muller, “Improvement on Pulsed Magnetic Systems at SOLEIL”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC081, pp. 2183-2185. 
[n]	J. T. Seeman et al., “Experimental Beam Dynamics in the SLC Linac”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 73-77. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search