Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. T. Maier et al., “Status of the Linac-commissioning for the Heavy Ion Cancer Therapy Facility HIT”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS036, pp. 1571-1573.
[n] H. D. Thomsen, A. I. S. Holm, and S. P. Møller, “The Beam Expander System for the European Spallation Source”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS031, pp. 3487-3489.
[n] S. P. M?©ller, N. Hertel, and J. S. Nielsen, “Status and Very First Commissioning of the ASTRID2 Synchrotron Light Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP003, pp. 1605-1607.
[n] J. S. Nielsen, N. Hertel, and S. P. Møller, “Installation of the ASTRID2 Synchrotron Light Source”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC003, pp. 2909-2911.
[n] O. S. Adeyemi et al., “Evolution of Pressure in Positron Source for Future Linear e+e- Collider”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC005, pp. 994-996.
[n] P. Frigola et al., “A Novel Fabrication Technique for the Production of RF Photoinjectors”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP086, pp. 751-753.
[n] R. M. Brodhage, A. Almomani, and U. Ratzinger, “Design Study of a High Frequency Proton Ladder RFQ”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO014, pp. 3788-3790.
[n] P. Strolin and E. J. N. Wilson, “The Effect of Momentum Spread in Slow Extraction at an Integer Resonance - A Theoretical Study”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 255-260.
[n] F. Staufenbiel et al., “Heat Load Studies in Target and Collimator Materials for the ILC Positron Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD032, pp. 2576-2578.
[n] J. S. Nielsen, N. Hertel, and S. P. M?©ller, “Beam Lifetime in the ASTRID and ASTRID2 Synchrotron Light Sources: Excitations and Vacuum Dependences”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA004, pp. 67-69.
[n] P. Forck, A. Peters, and P. Strehl, “Beam Diagnostics for the upgraded UNILAC at GSI”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP02A, pp. 1500-1502.
[n] S. Buhler, A. Caruette, M. Fouaidy, and T. Junquera, “Activities on Cryostats and SRF Cavities at the IPN ORSAY Laboratory”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93I42, pp. XX-XX.
[n] S. P. M?©ller, N. Hertel, and J. S. Nielsen, “Status and Very First Commissioning of the ASTRID2 Synchrotron Light Source”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA003, pp. 64-66.
[n] M. Borland et al., “Design and Performance of the Traveling-Wave Beam Chopper for the SSRL Injector”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 976-979.
[n] S. Boucher et al., “The Radiatron: A High Average Current Betatron for Industrial and Security Applications”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPP150, pp. 1860-1862.
[n] B. L. Butler and M. Featherby, “Metallized Ceramic Vacuum Pipe for Particle Beams”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1785-1788.
[n] W. Kernaghan and M. Ehsani, “A Solid State DC Circuit Breaker Based on the Gate Turn Off Thyristor (GTO)”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1492-1496.
[n] B. Cluggish et al., “Measurements of X-Ray Spectra on ECR-II”, in Proc. ECRIS'08, Chicago, IL, USA, Sep. 2008, paper MOPO-07, pp. 73-76.
[n] O. S. Adeyemi et al., “Pressure Acoustic Waves in Positron Production Targets for Future Lepton Colliders”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THEPPB012, pp. 3257-3259.
[n] E. J. N. Wilson, “The Lattice of the SPS”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1458-1461.
[n] A. I. S. Holm, S. P. Møller, and H. D. Thomsen, “The High Energy Beam Transport System for the European Spallation Source”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS050, pp. 3538-3540.
[n] M. Ehsani and R. L. Kustom, “A Bilateral Power Supply with Energy Storage Buffer for the Superconductive Coils of Large Particle Accelerators”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3781-3784.
[n] K. Knaack, M. Wendt, K. Wittenburg, R. Neubert, W. Vodel, and A. Peters, “Cryogenic Current Comparator for Absolute Measurements of the Dark Current of Superconducting Cavities for TESLA”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI118, pp. 1915-1917.
[n] A. Wheelhouse et al., “Testing and delivery of high beta cavities for the European Spallation Source by UKRI-STFC Daresbury Laboratory”, presented at the SRF'25, Tokyo, Japan, Sep. 2025, paper MOP27, unpublished.
[n] A. Peters, T. Hoffmann, and M. Schwickert, “Beam Diagnostic Devices and Data Acquisition for the HICAT Facility”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POT001, pp. XX-XX.
[n] B. Chen, S. Chen, and E. J. N. Wilson, “A Computer Simulation of Injection into a Superconducting Synchrotron”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2599-2602.
[n] R. Varela et al., “Beam Diagnostics Design for a Compact Superconducting Cyclotron for Radioisotope Production”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 108-110. doi:10.18429/JACoW-IBIC2016-MOPG29
[n] G. Andonian, S. Boucher, P. Frigola, A. Y. Murokh, and G. Travish, “A Real-time Bunch Length Terahertz Interferometer”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC073, pp. 1218-1220.
[n] R. Billinge et al., “An e-p Facility in the CERN SPS”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1191-1194.
[n] A. V. Smirnov et al., “A Metal-Dielectric Micro-Linac for Radiography Source Replacement”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1992-1994. doi:10.18429/JACoW-IPAC2016-TUPOY041
[n] A. A. Galatis, J. M. Belleman, A. Peters, U. Raich, and A. M. Zoubir, “Digital Beam Position Measurement at GSI-SIS and CERN-PS”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POT018, pp. XX-XX.
[n] W. Vodel et al., “SQUID Based Cryogenic Current Comparator for Measurements of the Dark Current of Superconducting Cavities”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POT009, pp. XX-XX.
[n] K. Elliott et al., “First FRIB =0.041 Production Coldmass Build”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 541-543. doi:10.18429/JACoW-LINAC2016-TUPLR033
[n] J. Pasternak, M. Aslaninejad, K. R. Long, and J. K. Pozimski, “Feasibility of a Common Proton Driver for a Neutron Spallation Source and a Neutrino Factory”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP064, pp. 1433-1435.
[n] T. O. Raubenheimer and P. Chen, “Ions in the Linacs of Future Linear Colliders”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-10, pp. 630-632.
[n] M. Fouaidy, T. Junquera, and A. Caruette, “Surface Temperature Measurements on Superconducting Cavities in Superfluid Helium”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91E18, pp. XX-XX.
[n] C. Krantz et al., “Slow Extraction Techniques at the Marburg Ion-Beam Therapy Centre”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1084-1086. doi:10.18429/JACoW-IPAC2018-TUPAL036
[n] D. Mishra and B. Kumar, “Role of twisted and two-color laser pulses in particle defocussing and acceleration gradients”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPA053, unpublished.
[n] P. Chen and D. Yu, “Simulation Results of RF Coupler Controllable by Dielectric Fluid”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP129, pp. 1073-1075.
For LaTeX
Use Complete Form
For BibTeX
References
- M. T. Maier et al., “Status of the Linac-commissioning for the Heavy Ion Cancer Therapy Facility HIT”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS036, pp. 1571-1573.
- H. D. Thomsen, A. I. S. Holm, and S. P. Møller, “The Beam Expander System for the European Spallation Source”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS031, pp. 3487-3489.
- S. P. M?©ller, N. Hertel, and J. S. Nielsen, “Status and Very First Commissioning of the ASTRID2 Synchrotron Light Source”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPP003, pp. 1605-1607.
- J. S. Nielsen, N. Hertel, and S. P. Møller, “Installation of the ASTRID2 Synchrotron Light Source”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC003, pp. 2909-2911.
- O. S. Adeyemi et al., “Evolution of Pressure in Positron Source for Future Linear e+e- Collider”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC005, pp. 994-996.
- P. Frigola et al., “A Novel Fabrication Technique for the Production of RF Photoinjectors”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP086, pp. 751-753.
- R. M. Brodhage, A. Almomani, and U. Ratzinger, “Design Study of a High Frequency Proton Ladder RFQ”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO014, pp. 3788-3790.
- P. Strolin and E. J. N. Wilson, “The Effect of Momentum Spread in Slow Extraction at an Integer Resonance - A Theoretical Study”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 255-260.
- F. Staufenbiel et al., “Heat Load Studies in Target and Collimator Materials for the ILC Positron Source”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD032, pp. 2576-2578.
- J. S. Nielsen, N. Hertel, and S. P. M?©ller, “Beam Lifetime in the ASTRID and ASTRID2 Synchrotron Light Sources: Excitations and Vacuum Dependences”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPEA004, pp. 67-69.
- P. Forck, A. Peters, and P. Strehl, “Beam Diagnostics for the upgraded UNILAC at GSI”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP02A, pp. 1500-1502.
- S. Buhler, A. Caruette, M. Fouaidy, and T. Junquera, “Activities on Cryostats and SRF Cavities at the IPN ORSAY Laboratory”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93I42, pp. XX-XX.
- S. P. M?©ller, N. Hertel, and J. S. Nielsen, “Status and Very First Commissioning of the ASTRID2 Synchrotron Light Source”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPEA003, pp. 64-66.
- M. Borland et al., “Design and Performance of the Traveling-Wave Beam Chopper for the SSRL Injector”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 976-979.
- S. Boucher et al., “The Radiatron: A High Average Current Betatron for Industrial and Security Applications”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPP150, pp. 1860-1862.
- B. L. Butler and M. Featherby, “Metallized Ceramic Vacuum Pipe for Particle Beams”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1785-1788.
- W. Kernaghan and M. Ehsani, “A Solid State DC Circuit Breaker Based on the Gate Turn Off Thyristor (GTO)”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1492-1496.
- B. Cluggish et al., “Measurements of X-Ray Spectra on ECR-II”, in Proc. 18th Int. Workshop on ECR Ion Sources (ECRIS'08), Chicago, IL, USA, Sep. 2008, paper MOPO-07, pp. 73-76.
- O. S. Adeyemi et al., “Pressure Acoustic Waves in Positron Production Targets for Future Lepton Colliders”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THEPPB012, pp. 3257-3259.
- E. J. N. Wilson, “The Lattice of the SPS”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1458-1461.
- A. I. S. Holm, S. P. Møller, and H. D. Thomsen, “The High Energy Beam Transport System for the European Spallation Source”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS050, pp. 3538-3540.
- M. Ehsani and R. L. Kustom, “A Bilateral Power Supply with Energy Storage Buffer for the Superconductive Coils of Large Particle Accelerators”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3781-3784.
- K. Knaack, M. Wendt, K. Wittenburg, R. Neubert, W. Vodel, and A. Peters, “Cryogenic Current Comparator for Absolute Measurements of the Dark Current of Superconducting Cavities for TESLA”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI118, pp. 1915-1917.
- A. Wheelhouse et al., “Testing and delivery of high beta cavities for the European Spallation Source by UKRI-STFC Daresbury Laboratory”, presented at the 22st International Conference on RF Superconductivity (SRF'25), Tokyo, Japan, Sep. 2025, paper MOP27, unpublished.
- A. Peters, T. Hoffmann, and M. Schwickert, “Beam Diagnostic Devices and Data Acquisition for the HICAT Facility”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POT001, pp. XX-XX.
- B. Chen, S. Chen, and E. J. N. Wilson, “A Computer Simulation of Injection into a Superconducting Synchrotron”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2599-2602.
- R. Varela et al., “Beam Diagnostics Design for a Compact Superconducting Cyclotron for Radioisotope Production”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 108-110.
- G. Andonian, S. Boucher, P. Frigola, A. Y. Murokh, and G. Travish, “A Real-time Bunch Length Terahertz Interferometer”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC073, pp. 1218-1220.
- R. Billinge et al., “An e-p Facility in the CERN SPS”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1191-1194.
- A. V. Smirnov et al., “A Metal-Dielectric Micro-Linac for Radiography Source Replacement”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1992-1994.
- A. A. Galatis, J. M. Belleman, A. Peters, U. Raich, and A. M. Zoubir, “Digital Beam Position Measurement at GSI-SIS and CERN-PS”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POT018, pp. XX-XX.
- W. Vodel et al., “SQUID Based Cryogenic Current Comparator for Measurements of the Dark Current of Superconducting Cavities”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POT009, pp. XX-XX.
- K. Elliott et al., “First FRIB =0.041 Production Coldmass Build”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 541-543.
- J. Pasternak, M. Aslaninejad, K. R. Long, and J. K. Pozimski, “Feasibility of a Common Proton Driver for a Neutron Spallation Source and a Neutrino Factory”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6PFP064, pp. 1433-1435.
- T. O. Raubenheimer and P. Chen, “Ions in the Linacs of Future Linear Colliders”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-10, pp. 630-632.
- M. Fouaidy, T. Junquera, and A. Caruette, “Surface Temperature Measurements on Superconducting Cavities in Superfluid Helium”, in Proc. 5th Int. Conf. RF Superconductivity (SRF'91), Hamburg, Germany, Aug. 1991, paper SRF91E18, pp. XX-XX.
- C. Krantz et al., “Slow Extraction Techniques at the Marburg Ion-Beam Therapy Centre”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1084-1086.
- D. Mishra and B. Kumar, “Role of twisted and two-color laser pulses in particle defocussing and acceleration gradients”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA053, unpublished.
- P. Chen and D. Yu, “Simulation Results of RF Coupler Controllable by Dielectric Fluid”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP129, pp. 1073-1075.
Back to search