JaCoW Logo

Reference Search

Favourites


For Word

[n]	C. Roderick, R. Billen, and D. D. Teixeira, “Instrumentation of the CERN Accelerator Logging Service: Ensuring Performance, Scalability, Maintenance and Diagnostics”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper THCHAUST06, pp. 1232-1235. 
[n]	D. U. L. Yu, G. D. Craig, and J. F. DeFord, “Relativistic Klystron Wakefields”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1178-1181. 
[n]	M. S. de Jong et al., “Ferrite-Loaded Higher-Order-Mode Absorbers for the MIT-Bates South Hall Ring”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2016-2019. 
[n]	N. Liu, A. Ibrahim, A. Semenov, and M. Wendt, “Digital Signal Processing for Bunched Beam Intensity Measurements”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper MOPG002, pp. 20-22. 
[n]	N. Xiong, P. Hathaway, N. Hauser, and T. K. Lam, “Multi-platform Processor Framework for Data Analysis, Data Acquisition and Simulation”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP076, pp. 815-817. 
[n]	C. Taylor et al., “A Novel Epoxy-Free Construction Method for Fabricating Dipole Magnets and Test Results”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3283-3286. 
[n]	G. Wright and R. Igarashi, “EPICS Data Acquisition Software at the CLS”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper THPL009, pp. 142-143. 
[n]	M. Piekarski, W. T. Kitka, and J. Jaworek-Korjakowska, “Deep Neural Network for Anomaly Detection in Accelerators”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1379. doi:10.18429/JACoW-ICALEPCS2019-WEPHA121
[n]	D. Gonnella et al., “RF Performance of Nitrogen-Doped Production SRF Cavities for LCLS-II”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1156-1159. doi:10.18429/JACoW-IPAC2017-MOPVA128
[n]	D. P. Brodrick et al., “Motion Control System for the European Spallation Source Target Wheel”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 717-721. doi:10.18429/JACoW-ICALEPCS2017-TUPHA129
[n]	A. Scheinker et al., “Preliminary Study of Advanced LLRF Controls at LANSCE for Beam Loading Compensation in the MaRIE X-FEL”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 411-413. doi:10.18429/JACoW-NAPAC2016-TUPOA63
[n]	P. Sagalo et al., “The State Machine for the Accelerator System Working in the National Synchrotron Radiation Centre Solaris”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 706-708. doi:10.18429/JACoW-ICALEPCS2017-TUPHA126
[n]	S. Nakamura et al., “High-quality Proton Beam Obtained by Combination of Phase Rotation and the Irradiation of the Intense Short-pulse Laser”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH155, pp. 3158-3160. 
[n]	S. M. Pattalwar, R. Bate, G. Cox, P. A. McIntosh, and A. Oates, “Instrumentation and Control System for the International ERL Cryomodule”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO053, pp. 710-714. 
[n]	D. P. Brodrick, T. Brys, T. Korhonen, and J. E. Sparger, “EPICS Architecture for Neutron Instrument Control at the European Spallation Source”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1043-1047. doi:10.18429/JACoW-ICALEPCS2017-WEBPL01
[n]	A. Pettersson, D. P. Brodrick, T. Brys, and M. A. Hartl, “Integration of Sample Environment Systems at ESS”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 741-744. doi:10.18429/JACoW-ICALEPCS2017-TUPHA141
[n]	M. Viti et al., “The Bunch Arrival Time Monitor at FLASH and European XFEL”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 701-705. doi:10.18429/JACoW-ICALEPCS2017-TUPHA125
[n]	P. Grand, “Vacuum Requirements for Linacs”, in Proc. LINAC'63, New Heaven, CT, USA, Oct. 1963, paper 13-01, pp. 421-430. 
[n]	V. Chouhan et al., “Vertical Electropolishing of 1.3 GHz Niobium Nine-cell SRF Cavity: Bulk Removal and RF Performance”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 491-493. doi:10.18429/JACoW-LINAC2018-TUPO068
[n]	P. Grand, K. Batchelor, R. Chasman, and R. Rheaume, “The Proposed Brookhaven Accelerator-Based Neutron Generator”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper C08, pp. 153-159. 
[n]	T. G. Lucas, P. J. Giansiracusa, D. J. Peake, R. P. Rassool, M. J. Boland, and R. J. Steinhagen, “An Optical Intra-Bunch Instability Monitor for Short Electron Bunches”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 161-164. doi:10.18429/JACoW-IBIC2015-MOPB049
[n]	G. T. Danby, J. E. Allinger, and J. W. Jackson, “Magnet Design for a Very High Energy Synchrotron Employing a Separated Function Magnet Lattice”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 431-437. 
[n]	E. Matias et al., “Canadian Light Source - Phase II Beamline Control System Status Update”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP075, pp. 254-256. 
[n]	G. H. Trilling, “Invited Paper- Impact of Storage Rings on Elementary Particle Physics”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4252-4258. 
[n]	K. Batchelor, T. Nishikawa, and T. Werntz, “Numerical Analysis of the RF Field in a Drift Tube Loaded Cavity”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 295-303. 
[n]	T. A. Welton, “Session V Introductory Comments”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59E01, pp. 223-223. 
[n]	Y. Jongen, M. Abs, S. Zaremba, T. Delvigne, and A. Herer, “Realignment of a Diverging Electron Beam: A New Beam Delivery System for Rhodotrons”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P103, pp. 3857-3859. 
[n]	G. Wright et al., “Recent Changes to Beamline Software at the Canadian Light Source”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC100, pp. 813-815. 
[n]	R. T. Dowd, M. J. Boland, G. LeBlanc, D. J. Peake, and Y. E. Tan, “Impedance Effects in the Australian Synchrotron Storage Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD026, pp. 1979-1981. 
[n]	T. A. Welton, “Computer Codes for Cyclotron Orbit Calculations”, in Proc. Cyclotrons'59, Oak Ridge, TN, USA, Jul. 1959, paper CYC59A11, pp. 48-54. 
[n]	L. Pavlovic, A. O. Borga, M. Ferianis, M. Predonzani, and F. Rossi, “Bunch Arrival Monitor at FERMI@Elettra”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM086, pp. 394-397. 
[n]	T. F. G??nzel, “Evaluation of the Vertical Transverse Impedance of the ESRF-machine by Element-wise Wakefield Calculation”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI010, pp. 1499-1501. 
[n]	D. Shoffstall, “Visible Wavelength Free Electron Oscillator”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE2-04, pp. 295-301. 
[n]	M. Steinberg, P. Grand, H. J. C. Kouts, J. R. Powell, and H. Takahashi, “The Linear Accelerator Fuel Enricher Regenerator (LAFER) and Fission Product Transmutor (APEX”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3002-3003. 
[n]	W. Decking, O. Kaul, H. Nesemann, and J. Roßbach, “Treatment of Wiggler and Undulator Field Errors in Tracking Codes”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAC19, pp. 2874-2876. 
[n]	L. Zhao et al., “Study on Cleaning of Copper Plated Bellows for LCLS-II”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 71-73. doi:10.18429/JACoW-LINAC2018-MOPO019
[n]	D. Shu et al., “Mechanical Design of Compact Vertical and Horizontal Linear Nanopositioning Flexure Stages With Centimeter-Level Travel Range for X-Ray Beamline Instrumentation”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4096-4099. doi:10.18429/JACoW-IPAC2017-THPAB154
[n]	D. Beauregard and J. Stampe, “Canadian Light Source developments of the ALBA/CLS DLLRF system”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3439-3441. doi:10.18429/JACoW-IPAC2024-THPG70
[n]	J. Rochford et al., “The Development of a Superconducting Undulator for the ILC Positron Source”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE2RAI01, pp. 1839-1843. 
[n]	J. Preble et al., “SNS Cryomodule Performance”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROAA001, pp. 457-461. 
[n]	B. Barish, “GDE Expectations from SRF Community”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper FRA09, pp. 642-642. 
[n]	W. V. Hassenzahl, S. Caspi, W. Gilbert, C. Peters, J. Rechen, and C. Taylor, “A Layer-Wound, 8.7 Tela Superconducting Dipole Magnet”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3396-3399. 
[n]	M. Risoldi, V. Amaral, B. F. Barroca, D. Buchs, and L. Masetti, “A Methodology for Control Systems GUI Prototyping - A Case Study”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper WEY01, pp. 151-153. 
[n]	J. A. Martin, J. B. Ball, E. D. Hudson, R. S. Lord, G. S. McNeilly, and S. W. Mosko, “Design Status of a Separated-Sector Cyclotron Booster Accelerator for the Holifield Heavy Ion Research Facility”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1165-1168. 
[n]	P. P. Goryl et al., “Tango Based Control System at SOLARIS Synchrotron”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4101-4103. doi:10.18429/JACoW-IPAC2016-THPOY008
[n]	H. Gassot, S. Bousson, G. Olry, and S. Rousselot, “Low- Triple Spoke Cavity Design Improvement for Proton Linac”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO039, pp. 177-179. 
[n]	I. Rodriguez, “Transient Simulation of the ISIS Synchrotron Singlet Quadrupoles Using OPERA 3D”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4334-4337. doi:10.18429/JACoW-IPAC2017-THPIK104
[n]	I. Bustinduy et al., “Low Energy Beam Transport Developments for the Bilbao Accelerator”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP011, pp. 1522-1524. 
[n]	I. Bustinduy et al., “Beam Dynamics Simulations for the ESS-Bilbao H- Ion Source”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC023, pp. 2052-2054. 
[n]	P. Gladkikh, A. Dovbnya, Yu. Tur, V. Shendrik, and A. Shcherbakov, “Electron Beam Monochromatization in the Linac used as an Injector to the Stretcher”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-27, pp. 595-597. 
[n]	E. B. Holzer et al., “Generation of 1.5 Million Beam Loss Threshold Values”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC147, pp. 3333-3335. 
[n]	N. Krupka et al., “Quality Control at the TTF-Cleanroom Infrastructure for Cavity-Processing”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP18, pp. 322-326. 
[n]	M. Pieck et al., “The LANSCE Control System Current State and Upgrade Outlook”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS052, pp. 554-556. 
[n]	W. X. Cheng and T. Obina, “Multi-bunch Feedback Activities at Photon Factory Advanced Ring”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEC3H101, pp. 330-332. 
[n]	S. Nagaitsev et al., “Commissioning of the Fermilab Electron Cooler Prototype Beam Line”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPAE036, pp. 2020-2022. 
[n]	F. Blas et al., “Conversion of the PS Complex as LHC Proton Pre-Injector”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9W011, pp. 973-975. 
[n]	G. K. Sahoo, F. Brinker, and F. Wedtstein, “Orbitkorrektur, a Java Client for Transverse Orbit Correction in PETRA-III”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 120-122. doi:10.18429/JACoW-PCAPAC2016-THPOPRPO22
[n]	J. Marcos et al., “Detailed Characterization of MEBT Quadrupoles for the Linear IFMIF Prototype Accelerator (LIPAc)”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1151-1153. doi:10.18429/JACoW-IPAC2016-TUPMB019
[n]	W. B. Herrmannsfeldt and R. H. Miller, “A 45[degree] Inflection System for the Stanford Two-Mile Accelerator”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 842-846. 
[n]	R. Tanner, M. de Jong, E. Matias, M. Silzer, J. Stampe, and G. Wright, “Canadian Light Source Storage Ring RF System”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THP32, pp. 532-534. 
[n]	R. Tanner, S. Hu, G. Wright, and E. D. Matias, “Integrating Siemens PLCs and EPICS over Ethernet at the Canadian Light Source”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WPO001, pp. 31-33. 
[n]	I. Rodriguez, F. J. Bermejo, J. L. Munoz, and D. de Cos, “Calculation, Design and Manufacturing of a Resistive Quadrupole for the ESS-Bilbao Transfer Lines”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPO012, pp. 2418-2420. 
[n]	R. Stassen, B. Breitkreutz, G. Schug, and H. Stockhorst, “Stochastic Cooling of Heavy Ions in the HESR”, in Proc. COOL'15, Newport News, VA, USA, Sep.-Oct. 2015, paper MOYAUD02, pp. 15-19. 
[n]	A. Basti et al., “Optimization of ILC Cryomodule Design Using Explosion Welding Technology”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 913-916. doi:10.18429/JACoW-IPAC2015-MOPHA052
[n]	A. Roy et al., “Status of Superconducting Linac Booster for NSC Pelletron”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97A30, pp. 265-268. 
[n]	G. Cavallari, Ph. Gayet, G. Geschonke, D. Kaiser, and J. M. Jimenez, “Beam Related Thermal Losses on the Cryogenic and Vacuum Systems of LEP”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97A13, pp. 122-132. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search