Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. N. Matveenko, O. A. Shevchenko, and N. A. Vinokurov, “ISOCHRONOUS BEND FOR HIGH GAIN RING FEL”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper TUDP02, pp. XX-XX.
[n] D. Welsh et al., “Planned Beam Transport and Two-Cavity Amplifier Experiments on the University of Maryland Gyroklystron”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 144-147.
[n] J. A. Mitchell et al., “HOM Coupler Alterations for the LHC DQW Crab Cavity”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 249-253. doi:10.18429/JACoW-SRF2017-MOPB079
[n] M. R. Rehman et al., “Progress of the Novel Three-dimensional Spiral Injection Scheme Test Experiment”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 717-720. doi:10.18429/JACoW-LINAC2018-THPO017
[n] R. Eichhorn and U. Ratzinger, “Development of a Superconducting H-mode Cavity for the Low-Beta Regime”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper WEP022, pp. 462-464.
[n] T. Kamei and Y. Kimura, “KEK Accelerator Facilities and Tristan Project”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2052-2055.
[n] Q. Wu, I. Ben-Zvi, Y. Hao, S. Verdu-Andres, and B. P. Xiao, “eRHIC Crab Cavity Choice for Ring-ring Design”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 43-46. doi:10.18429/JACoW-SRF2017-MOPB002
[n] C. Serrano et al., “RF Controls for High-Q Cavities for the LCLS-II”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2929-2933. doi:10.18429/JACoW-IPAC2018-THYGBE3
[n] J. A. Mitchell et al., “Simulation and Measurements of Crab Cavity HOMs and HOM Couplers for HL-LHC”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 881-885. doi:10.18429/JACoW-SRF2017-THPB059
[n] J. Peng et al., “Commissioning Plan for the CSNS Linac”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO045, pp. 3869-3871.
[n] N. A. Tahir, J. Blanco, R. Schmidt, R. Piriz, and A. Shutov, “LHC Beam Impact on Materials Considering the Time Structure of the Beam”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS088, pp. 3639-3641.
[n] P. Rullhusen, “Novel X-Ray Sources Produced by Electron Beams”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 240-245.
[n] A. V. Aleksandrov et al., “Feasibility Study of Using an Electron Beam for Profile Measurements in the SNS Accumulator Ring”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT039, pp. 2586-2588.
[n] A. Basti et al., “Optimization of ILC Cryomodule Design Using Explosion Welding Technology”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 913-916. doi:10.18429/JACoW-IPAC2015-MOPHA052
[n] M. Guinchard, K. Artoos, A. H. J. Gerardin, and A. M. Kuzmin, “New Techniques for Mechanical Measurements in the Superconducting Magnet Models”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB043, pp. 370-372.
[n] Q. Wu, I. Ben-Zvi, S. Verdu-Andres, and B. P. Xiao, “Higher Order Mode Coupling Options for the eRHIC Crab Cavity”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 121-124. doi:10.18429/JACoW-IPAC2018-MOPMF020
[n] H. Schmickler et al., “Sub-nm Beam Motion Analysis Using a Standard BPM with High Resolution Electronics”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUCNB01, pp. 69-73.
[n] L. Xiao, A. Dhar, V. Dolgashev, and M. Othman, “RF window ghost mode analysis”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2447-2449. doi:10.18429/JACoW-IPAC2025-WEPS135
[n] S. Belomestnykh, S. Henderson, and R. Kaplan, “Superconducting RF Control Issues at CESR”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH125, pp. 1065-1067.
[n] R. Schmidt et al., “Results of an Experiment on Hydrodynamic Tunnelling at the SPS HiRadMat High Intensity Proton Facility”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOODB103, pp. 37-39.
[n] H. Ouyang, S. Fu, X. Guan, W. Xu, and T. Xu, “The Study on the Design of an Intense-Beam RFQ with Stability”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP21016, pp. XX-XX.
[n] S. Verdu-Andres, I. Ben-Zvi, Q. Wu, and R. Calaga, “Crab Cavity Systems for Future Colliders”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2474-2477. doi:10.18429/JACoW-IPAC2017-WEYA1
[n] H. Matsumoto, M. Akemoto, H. Hayano, T. Naito, and S. Takeda, “High-Gradient S-Band Test Linac for Japan Linear Collider”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-02, pp. 296-298.
[n] O. Yavas, H.-H. Braun, R. Corsini, and S. Sultansoy, “CLIC Drive Beam and LHC Based FEL-Nucleus Collider”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAT097, pp. 4320-4322.
[n] A. Almomani and U. Ratzinger, “Status of a 325 MHz High Gradient CH - Cavity”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 982-984. doi:10.18429/JACoW-LINAC2016-THPLR059
For LaTeX
Use Complete Form
For BibTeX
References
- A. N. Matveenko, O. A. Shevchenko, and N. A. Vinokurov, “ISOCHRONOUS BEND FOR HIGH GAIN RING FEL”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper TUDP02, pp. XX-XX.
- D. Welsh et al., “Planned Beam Transport and Two-Cavity Amplifier Experiments on the University of Maryland Gyroklystron”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 144-147.
- J. A. Mitchell et al., “HOM Coupler Alterations for the LHC DQW Crab Cavity”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 249-253.
- M. R. Rehman et al., “Progress of the Novel Three-dimensional Spiral Injection Scheme Test Experiment”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 717-720.
- R. Eichhorn and U. Ratzinger, “Development of a Superconducting H-mode Cavity for the Low-Beta Regime”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper WEP022, pp. 462-464.
- T. Kamei and Y. Kimura, “KEK Accelerator Facilities and Tristan Project”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2052-2055.
- Q. Wu, I. Ben-Zvi, Y. Hao, S. Verdu-Andres, and B. P. Xiao, “eRHIC Crab Cavity Choice for Ring-ring Design”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 43-46.
- C. Serrano et al., “RF Controls for High-Q Cavities for the LCLS-II”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2929-2933.
- J. A. Mitchell et al., “Simulation and Measurements of Crab Cavity HOMs and HOM Couplers for HL-LHC”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 881-885.
- J. Peng et al., “Commissioning Plan for the CSNS Linac”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO045, pp. 3869-3871.
- N. A. Tahir, J. Blanco, R. Schmidt, R. Piriz, and A. Shutov, “LHC Beam Impact on Materials Considering the Time Structure of the Beam”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS088, pp. 3639-3641.
- P. Rullhusen, “Novel X-Ray Sources Produced by Electron Beams”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 240-245.
- A. V. Aleksandrov et al., “Feasibility Study of Using an Electron Beam for Profile Measurements in the SNS Accumulator Ring”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT039, pp. 2586-2588.
- A. Basti et al., “Optimization of ILC Cryomodule Design Using Explosion Welding Technology”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 913-916.
- M. Guinchard, K. Artoos, A. H. J. Gerardin, and A. M. Kuzmin, “New Techniques for Mechanical Measurements in the Superconducting Magnet Models”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB043, pp. 370-372.
- Q. Wu, I. Ben-Zvi, S. Verdu-Andres, and B. P. Xiao, “Higher Order Mode Coupling Options for the eRHIC Crab Cavity”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 121-124.
- H. Schmickler et al., “Sub-nm Beam Motion Analysis Using a Standard BPM with High Resolution Electronics”, in Proc. 14th Beam Instrumentation Workshop (BIW'10), Santa Fe, NM, USA, May 2010, paper TUCNB01, pp. 69-73.
- L. Xiao, A. Dhar, V. Dolgashev, and M. Othman, “RF window ghost mode analysis”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPS135, pp. 2447-2449.
- S. Belomestnykh, S. Henderson, and R. Kaplan, “Superconducting RF Control Issues at CESR”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH125, pp. 1065-1067.
- R. Schmidt et al., “Results of an Experiment on Hydrodynamic Tunnelling at the SPS HiRadMat High Intensity Proton Facility”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOODB103, pp. 37-39.
- H. Ouyang, S. Fu, X. Guan, W. Xu, and T. Xu, “The Study on the Design of an Intense-Beam RFQ with Stability”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper THP21016, pp. XX-XX.
- S. Verdu-Andres, I. Ben-Zvi, Q. Wu, and R. Calaga, “Crab Cavity Systems for Future Colliders”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2474-2477.
- H. Matsumoto, M. Akemoto, H. Hayano, T. Naito, and S. Takeda, “High-Gradient S-Band Test Linac for Japan Linear Collider”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-02, pp. 296-298.
- O. Yavas, H.-H. Braun, R. Corsini, and S. Sultansoy, “CLIC Drive Beam and LHC Based FEL-Nucleus Collider”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAT097, pp. 4320-4322.
- A. Almomani and U. Ratzinger, “Status of a 325 MHz High Gradient CH - Cavity”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 982-984.
Back to search