Warning
Some papers titles are all uppercase, you must correct this before using this reference.
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Fouaidy, S. Bousson, J. Lesrel, S. M, and V. Palmieri, “Tests Results of SRF 3 GHz Bulk Niobium Spun Cavities”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPDO037, pp. 2232-2234.
[n] M. K. Dey et al., “Design of the Proposed 250 Mev Superconducting Cyclotron Magnet”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA022, pp. 661-663.
[n] T. Snijder, T. Juerges, and J. J. D. Mol, “Tango Controls Device Attribute extension in Python3”, presented at the ICALEPCS'21, Shanghai, China, Oct. 2021, paper MOPV046, unpublished.
[n] R. Pana, A. Curcio, and A. I. Wawrzyniak, “LUMOS: A Visible Diagnostic Beamline for the Solaris Storage Ring”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3901-3903. doi:10.18429/JACoW-IPAC2021-THPAB064
[n] Z. Ahmed and R. C. Sethi, “An Analytical Method to Determine the Geometry of the Sectors”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I1-07, pp. 305-308.
[n] G. Bisoffi, A. Lombardi, A. Pisent, and V. A. Andreev, “Studies of a Superconducting RFQ for Legnaro”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-29, pp. 774-776.
[n] Y. C. Yang et al., “Development of the TPS Vacuum Interlock and Monitor Systems”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2387-2389. doi:10.18429/JACoW-IPAC2014-WEPME051
[n] K. T. Nguyen, R. F. Schneider, J. R. Smith, and H. S. Uhm, “Relativistic Electron Beam Ion Hose Instability in Beam-Induced Channels”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1096-1099.
[n] A. E. Levichev, A. M. Barnyakov, V. M. Pavlov, Y. D. Chernousov, V. Ivannikov, and I. V. Shebolaev, “Linear Accelerator based on Parallel Coupled Accelerating Structure”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper SUPB009, pp. 19-21.
[n] R. Valizadeh et al., “Optimization of deposition parameters of Nb3Sn thin film on copper with and without buffer layer”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPB069, unpublished.
[n] A. J. Jason, D. W. Hudgings, and O. B. van Dyck, “Neutralization of H- Beams by Magnetic Stripping”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2704-2707.
[n] K. Cerff, M. Hagelstein, W. Mexner, and T. Spangenberg, “A Modular Control System Based on ACS for Present and Future ANKA Insertion Devices”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper TUP003, pp. 82-84.
[n] A. Gholampour, S. Amiri, H. Ghasem, H. Khosroabadi, J. Rahighi, and M. Lamehi Rashti, “Effect of the Electron Beam Emittance on the ILSF Radiation of Sources and Beamline Design”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2075-2077. doi:10.18429/JACoW-IPAC2014-WEPRO057
[n] D. W. Storey, Y.-C. Chao, and L. Merminga, “Beam Dynamics Driven Requirements on the ARIEL e-linac SRF Separator Cavity”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPBA01, pp. 1223-1225.
[n] Q. Wu, I. Ben-Zvi, S. Verdu-Andres, and B. P. Xiao, “Higher Order Mode Coupling Options for the eRHIC Crab Cavity”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 121-124. doi:10.18429/JACoW-IPAC2018-MOPMF020
[n] N. I. Tarantin, “NEW METHOD OF ELECTROSTATIC ACCELERATING AND STRONG QUADRUPOLE FOCUSING OF CHARGED PARTICLES ON HIGH VOLTAGE ACCELERATORS OF DIRECT ACTION AND ITS POSSIBLE APPLICATIONS”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THBP26, pp. XX-XX.
[n] M. Neroni et al., “Characterization of the longitudinal beam coupling impedance and mitigation strategy for the fast extraction kicker KFA79 in the CERN PS”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3458-3461. doi:10.18429/JACoW-IPAC2023-WEPL150
[n] L. Faillace et al., “High Gradient Normal Conducting Radio-frequency Photoinjector System for Sincrotrone Trieste”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI089, pp. 2905-2907.
[n] N. J. Evans, S. E. Kopp, and E. Prebys, “Precision Monitoring of Relative Beam Intensity”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP093, pp. 271-273.
[n] P. A. Schmelzbach and Th. Stammbach for the Injector, “Beam Intensity Modulation at the PSI Philips Cyclotron”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P2-12, pp. XX-XX.
[n] E. Wang and K. Aulenbacher, “ERL17 Workshop, WG1 Summary: Injectors”, in Proc. ERL'17, Geneva, Switzerland, Jun. 2017, pp. 77-78. doi:10.18429/JACoW-ERL2017-FRIBCC001
[n] J. C. Brutus et al., “Mechanical Design of the 704 MHz 5-cell SRF Cavity Cold Mass for CeC PoP Experiment”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2678-2680. doi:10.18429/JACoW-IPAC2014-WEPRI081
[n] F. Pellegrin and C. Rosenquist, “The ELT Linux Development Environment”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1125-1130. doi:10.18429/JACoW-ICALEPCS2017-THBPL05
[n] J. L. Bol et al., “High Intensity H- Cyclotrons for Radioisotope Production”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 764-767.
[n] I. Kaganovich, R. C. Davidson, H. E. Mebane, and A. Shnidman, “Calculation of Charge-Changing Cross Sections of Ions or Atoms Colliding with Fast Ions Using the Classical Trajectory Method”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP039, pp. 442-444.
[n] G. Cun?¡ et al., “ALBA Controls System Software Stack Upgrade”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 222-229. doi:10.18429/JACoW-ICALEPCS2021-MOPV037
[n] Z. B. du Toit, S. J. Burger, P. J. Celliers, G. S. Z. Guasco, L. Roels, and H. A. Smit, “Aspects of the Design of an 8 MeV Cyclotron as Injector for a 200 MeV Separated-Sector Cyclotron”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper ABP-09, pp. 129-131.
[n] H. H. Slepicka and M. L. Gibbs, “PyDM - Extension Points”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 540. doi:10.18429/JACoW-ICALEPCS2019-MOPHA135
[n] A. D. Yeremian, V. A. Dolgashev, and S. G. Tantawi, “High Power S-band RF Window Optimized to Minimize Electric and Magnetic Field on the Surface”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPFI084, pp. 2893-2895.
[n] E. Acerbi, M. Sorbi, M. Castiglioni, N. Fi?®tier, and P. Mandrillon, “Design of the RF Cavity for a 200 MeV Proton Superconducting Cyclotron”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper E-21, pp. 245-248.
[n] P. Di Marcantonio, R. Cirami, B. Jeram, and G. Chiozzi, “Transmitting huge amounts of data design implementation and performance of the Bulk Data transfer mechanism in ACS”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P1_032.
[n] J. A. Avarias, G. Chiozzi, and H. Sommer, “Data Distribution Service as an Alternative to CORBA Notify Service of the ALMA Common Software”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEA006, pp. 373-375.
[n] D. A. Walsh, S. P. Jamison, E. W. Snedden, and T. Lefevre, “A High Resolution Single-Shot Longitudinal Profile Diagnostic Using Electro-Optic Transposition”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 752-755. doi:10.18429/JACoW-IBIC2016-WEPG49
[n] T. Tran Ngoc and J.-P. Labrie, “Boiling Heat Transfer Process in the Design of High Power Linac Structures”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper MO3-19, pp. 90-92.
[n] R. Borghes, V. Chenda, A. Gianoncelli, and G. Kourousias, “Evolving a LabVIEW End-Station Software to a TANGO-Based Solution at the TwinMic Elettra Beamline”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 948-952. doi:10.18429/JACoW-ICALEPCS2017-TUPHA208
[n] A. Canabal, J. D. Bowyer, P. Chacon, N. A. Gillespie, M. A. Madrid, and T. Tajima, “Development of a Temperature Mapping System for 1.3-GHz 9-Cell SRF Cavities”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS031, pp. 2406-2408.
[n] M. K. Dey, A. Chakrabarti, and A. Dutta Gupta, “Design of Ultra-Light Superconducting Proton Cyclotron for Production of Isotopes for Medical Applications”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TH2PB01, pp. 446-450.
[n] P. H??lsmann, H.-W. Glock, H. Klein, M. Kurz, and W. F. O. M??ller, “The Effect of a Single HOM-Damper Cell within a Channel of Undamped Cells”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO-06, pp. 56-58.
[n] C. Liu, S.-H. Chen, W.-Y. Chiang, and W. Lau, “Simulation study of a planar dielectric-lined waveguide structure for manipulation of femtosecond high brightness electron beam in longitudinal phase space”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1881-1884. doi:10.18429/JACoW-IPAC2023-TUPL056
For LaTeX
Use Complete Form
For BibTeX
References
- M. Fouaidy, S. Bousson, J. Lesrel, S. M, and V. Palmieri, “Tests Results of SRF 3 GHz Bulk Niobium Spun Cavities”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPDO037, pp. 2232-2234.
- M. K. Dey et al., “Design of the Proposed 250 Mev Superconducting Cyclotron Magnet”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THPMA022, pp. 661-663.
- T. Snijder, T. Juerges, and J. J. D. Mol, “Tango Controls Device Attribute extension in Python3”, presented at the 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, paper MOPV046, unpublished.
- R. Pana, A. Curcio, and A. I. Wawrzyniak, “LUMOS: A Visible Diagnostic Beamline for the Solaris Storage Ring”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3901-3903.
- Z. Ahmed and R. C. Sethi, “An Analytical Method to Determine the Geometry of the Sectors”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I1-07, pp. 305-308.
- G. Bisoffi, A. Lombardi, A. Pisent, and V. A. Andreev, “Studies of a Superconducting RFQ for Legnaro”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-29, pp. 774-776.
- Y. C. Yang et al., “Development of the TPS Vacuum Interlock and Monitor Systems”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2387-2389.
- K. T. Nguyen, R. F. Schneider, J. R. Smith, and H. S. Uhm, “Relativistic Electron Beam Ion Hose Instability in Beam-Induced Channels”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1096-1099.
- A. E. Levichev, A. M. Barnyakov, V. M. Pavlov, Y. D. Chernousov, V. Ivannikov, and I. V. Shebolaev, “Linear Accelerator based on Parallel Coupled Accelerating Structure”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper SUPB009, pp. 19-21.
- R. Valizadeh et al., “Optimization of deposition parameters of Nb3Sn thin film on copper with and without buffer layer”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPB069, this conference.
- A. J. Jason, D. W. Hudgings, and O. B. van Dyck, “Neutralization of H- Beams by Magnetic Stripping”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2704-2707.
- K. Cerff, M. Hagelstein, W. Mexner, and T. Spangenberg, “A Modular Control System Based on ACS for Present and Future ANKA Insertion Devices”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper TUP003, pp. 82-84.
- A. Gholampour, S. Amiri, H. Ghasem, H. Khosroabadi, J. Rahighi, and M. Lamehi Rashti, “Effect of the Electron Beam Emittance on the ILSF Radiation of Sources and Beamline Design”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2075-2077.
- D. W. Storey, Y.-C. Chao, and L. Merminga, “Beam Dynamics Driven Requirements on the ARIEL e-linac SRF Separator Cavity”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPBA01, pp. 1223-1225.
- Q. Wu, I. Ben-Zvi, S. Verdu-Andres, and B. P. Xiao, “Higher Order Mode Coupling Options for the eRHIC Crab Cavity”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 121-124.
- N. I. Tarantin, “NEW METHOD OF ELECTROSTATIC ACCELERATING AND STRONG QUADRUPOLE FOCUSING OF CHARGED PARTICLES ON HIGH VOLTAGE ACCELERATORS OF DIRECT ACTION AND ITS POSSIBLE APPLICATIONS”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper THBP26, pp. XX-XX.
- M. Neroni et al., “Characterization of the longitudinal beam coupling impedance and mitigation strategy for the fast extraction kicker KFA79 in the CERN PS”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL150, pp. 3458-3461.
- L. Faillace et al., “High Gradient Normal Conducting Radio-frequency Photoinjector System for Sincrotrone Trieste”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI089, pp. 2905-2907.
- N. J. Evans, S. E. Kopp, and E. Prebys, “Precision Monitoring of Relative Beam Intensity”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP093, pp. 271-273.
- P. A. Schmelzbach and Th. Stammbach for the Injector, “Beam Intensity Modulation at the PSI Philips Cyclotron”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper P2-12, pp. XX-XX.
- E. Wang and K. Aulenbacher, “ERL17 Workshop, WG1 Summary: Injectors”, in Proc. 59th Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'17), Geneva, Switzerland, Jun. 2017, pp. 77-78.
- J. C. Brutus et al., “Mechanical Design of the 704 MHz 5-cell SRF Cavity Cold Mass for CeC PoP Experiment”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2678-2680.
- F. Pellegrin and C. Rosenquist, “The ELT Linux Development Environment”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1125-1130.
- J. L. Bol et al., “High Intensity H- Cyclotrons for Radioisotope Production”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 764-767.
- I. Kaganovich, R. C. Davidson, H. E. Mebane, and A. Shnidman, “Calculation of Charge-Changing Cross Sections of Ions or Atoms Colliding with Fast Ions Using the Classical Trajectory Method”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6RFP039, pp. 442-444.
- G. Cun?¡ et al., “ALBA Controls System Software Stack Upgrade”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 222-229.
- Z. B. du Toit, S. J. Burger, P. J. Celliers, G. S. Z. Guasco, L. Roels, and H. A. Smit, “Aspects of the Design of an 8 MeV Cyclotron as Injector for a 200 MeV Separated-Sector Cyclotron”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper ABP-09, pp. 129-131.
- H. H. Slepicka and M. L. Gibbs, “PyDM - Extension Points”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 540.
- A. D. Yeremian, V. A. Dolgashev, and S. G. Tantawi, “High Power S-band RF Window Optimized to Minimize Electric and Magnetic Field on the Surface”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPFI084, pp. 2893-2895.
- E. Acerbi, M. Sorbi, M. Castiglioni, N. Fi?®tier, and P. Mandrillon, “Design of the RF Cavity for a 200 MeV Proton Superconducting Cyclotron”, in Proc. 14th Int. Cyclotron Conf. and Their Applications (Cyclotrons'95), Cape Town, South Africa, Oct. 1995, paper E-21, pp. 245-248.
- P. Di Marcantonio, R. Cirami, B. Jeram, and G. Chiozzi, “Transmitting huge amounts of data design implementation and performance of the Bulk Data transfer mechanism in ACS”, in Proc. 10th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'05), Geneva, Switzerland, Oct. 2005, paper P1_032.
- J. A. Avarias, G. Chiozzi, and H. Sommer, “Data Distribution Service as an Alternative to CORBA Notify Service of the ALMA Common Software”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEA006, pp. 373-375.
- D. A. Walsh, S. P. Jamison, E. W. Snedden, and T. Lefevre, “A High Resolution Single-Shot Longitudinal Profile Diagnostic Using Electro-Optic Transposition”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 752-755.
- T. Tran Ngoc and J.-P. Labrie, “Boiling Heat Transfer Process in the Design of High Power Linac Structures”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper MO3-19, pp. 90-92.
- R. Borghes, V. Chenda, A. Gianoncelli, and G. Kourousias, “Evolving a LabVIEW End-Station Software to a TANGO-Based Solution at the TwinMic Elettra Beamline”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 948-952.
- A. Canabal, J. D. Bowyer, P. Chacon, N. A. Gillespie, M. A. Madrid, and T. Tajima, “Development of a Temperature Mapping System for 1.3-GHz 9-Cell SRF Cavities”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS031, pp. 2406-2408.
- M. K. Dey, A. Chakrabarti, and A. Dutta Gupta, “Design of Ultra-Light Superconducting Proton Cyclotron for Production of Isotopes for Medical Applications”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper TH2PB01, pp. 446-450.
- P. H??lsmann, H.-W. Glock, H. Klein, M. Kurz, and W. F. O. M??ller, “The Effect of a Single HOM-Damper Cell within a Channel of Undamped Cells”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper MO-06, pp. 56-58.
- C. Liu, S.-H. Chen, W.-Y. Chiang, and W. Lau, “Simulation study of a planar dielectric-lined waveguide structure for manipulation of femtosecond high brightness electron beam in longitudinal phase space”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL056, pp. 1881-1884.
Back to search