Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] C.-K. Ng, K. Ko, N. Kroll, and R. Rimmer, “Coupling Network Simulation for the PEP-II RF Cavityfff”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2140-2143.
[n] T. Chanwattana, P. Klysubun, T. Pulampong, and P. Sudmuang, “Design and Optimization of Full Energy Injector Linac for Siam Photon Source II”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1570-1572. doi:10.18429/JACoW-IPAC2019-TUPGW072
[n] J. van de Walle et al., “Dosimetry of Pulsed Beams in Proton Therapy”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper WEPF08, pp. 548-552.
[n] D. V. Mitchell et al., “SRF Main Linac Cryomodule Design at Fermilab”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO042, pp. 672-674.
[n] D. C. Weisser, M. Malev, and J. S. Sokolowski, “The Stub to Plate Weld in Quarter Wave Resonators - An Investigation”, in Proc. SRF'84, Geneva, Switzerland, Jul. 1984, paper SRF84-10, pp. XX-XX.
[n] G. Andonian et al., “Beam profile monitor using thin gas sheets”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPS111, unpublished.
[n] R. O. Bangerter and D. D-M. Ho, “Heavy Ion Induction Linacs for Fusion”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU202, pp. 286-288.
[n] T. K. Yang et al., “Status of Beam Diagnostics at KHIMA Facility”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 126-130. doi:10.18429/JACoW-IBIC2015-MOPB038
[n] M. Fuchs et al., “Laser-Wakefield Accelerators as Drivers for Undulator-Based Light Sources”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper THOBI1, pp. 552-552.
[n] J. C. Collins and Wm. Manwaring, “Use of Microcomputers in the IUCF Control System”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper FP-06, pp. 601-603.
[n] P. A. Chubunov, V. S. Anashin, A. Issatov, and S. V. Mitrofanov, “Recent Advances in Beam Monitoring During SEE Testing on ISDE&JINR Heavy Ion Facilities”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 36-39. doi:10.18429/JACoW-IBIC2018-MOPA06
[n] C. Compton et al., “High-Current Elliptical Cavity Design and Prototyping”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper THP073, pp. 752-754.
[n] A. Fedotov, V. Danilov, and J. Wei, “Effects of Space Charge and Nonlinearities on Collective Instabilities of a Long Bunch”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPB009, pp. 3032-3034.
[n] R. B. Meinke, A. Faltens, and R. O. Bangerter, “Conceptual Design of Superconducting Quadrupole Arrays for the Heavy-Ion Fusion”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP110, pp. 3215-3217.
[n] R. Garnett, T. Larkin, G. Lawrence, and D. Liska, “Design and Simulation of a Bridge-Coupled DTL Structure for the 20-80 MeV Region of a Proton Linac for Accelerator Transmutation of Waste”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-68, pp. 802-804.
[n] K. Ikeda et al., “Optimum Combination of Low-beta; Cavities for a Proton Linac”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper MO-28, pp. 116-118.
For LaTeX
Use Complete Form
For BibTeX
References
- C.-K. Ng, K. Ko, N. Kroll, and R. Rimmer, “Coupling Network Simulation for the PEP-II RF Cavityfff”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2140-2143.
- T. Chanwattana, P. Klysubun, T. Pulampong, and P. Sudmuang, “Design and Optimization of Full Energy Injector Linac for Siam Photon Source II”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1570-1572.
- J. van de Walle et al., “Dosimetry of Pulsed Beams in Proton Therapy”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper WEPF08, pp. 548-552.
- D. V. Mitchell et al., “SRF Main Linac Cryomodule Design at Fermilab”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO042, pp. 672-674.
- D. C. Weisser, M. Malev, and J. S. Sokolowski, “The Stub to Plate Weld in Quarter Wave Resonators - An Investigation”, in Proc. 2nd Int. Conf. RF Superconductivity (SRF'84), Geneva, Switzerland, Jul. 1984, paper SRF84-10, pp. XX-XX.
- G. Andonian et al., “Beam profile monitor using thin gas sheets”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPS111, this conference.
- R. O. Bangerter and D. D-M. Ho, “Heavy Ion Induction Linacs for Fusion”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU202, pp. 286-288.
- T. K. Yang et al., “Status of Beam Diagnostics at KHIMA Facility”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 126-130.
- M. Fuchs et al., “Laser-Wakefield Accelerators as Drivers for Undulator-Based Light Sources”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper THOBI1, pp. 552-552.
- J. C. Collins and Wm. Manwaring, “Use of Microcomputers in the IUCF Control System”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper FP-06, pp. 601-603.
- P. A. Chubunov, V. S. Anashin, A. Issatov, and S. V. Mitrofanov, “Recent Advances in Beam Monitoring During SEE Testing on ISDE&JINR Heavy Ion Facilities”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 36-39.
- C. Compton et al., “High-Current Elliptical Cavity Design and Prototyping”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper THP073, pp. 752-754.
- A. Fedotov, V. Danilov, and J. Wei, “Effects of Space Charge and Nonlinearities on Collective Instabilities of a Long Bunch”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPB009, pp. 3032-3034.
- R. B. Meinke, A. Faltens, and R. O. Bangerter, “Conceptual Design of Superconducting Quadrupole Arrays for the Heavy-Ion Fusion”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP110, pp. 3215-3217.
- R. Garnett, T. Larkin, G. Lawrence, and D. Liska, “Design and Simulation of a Bridge-Coupled DTL Structure for the 20-80 MeV Region of a Proton Linac for Accelerator Transmutation of Waste”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-68, pp. 802-804.
- K. Ikeda et al., “Optimum Combination of Low-beta; Cavities for a Proton Linac”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper MO-28, pp. 116-118.
Back to search