Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. M. Barker, W. P. Grice, and W. Blokland, “Drift Compensation for the SNS Laserwire”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper RPPA30, pp. 576-578.
[n] M. Dach, T. Korhonen, and T. Pal, “Interfacing CANbus to EPICS at the Swiss Light Source”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP569, pp. XX-XX.
[n] S. Kato, H. Hayano, T. Kubo, T. Noguchi, T. Saeki, and M. Sawabe, “Study on Niobium Scratch and Tantalum or Carbonaceous Contamination at Niobium Surface with Field Emission Scanner”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP108, pp. 731-735.
[n] K. Ohmi, Y. Funakoshi, S. Hiramatsu, K. Oide, and M. Tobiyama, “Beam-beam Limit and Feedback Noise”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS033, pp. 619-621.
[n] A. V. Fedotov, M. Blaskiewicz, W. Fischer, T. Satogata, and S. Tepikian, “Interplay of Space-charge and Beam-beam Effects in a Collider”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper THO1C03, pp. 634-638.
[n] Y. Zhang et al., “A PARMELA Model of the CEBAF Injector valid over a Wide Range of Parameters”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT165, pp. 1515-1517.
[n] F. S. Rafael, J. Apfelbaum, A. C. Lira, and J. A. Pomilio, “A High Voltage Resonant Converter for Pulsed Magnets”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1429-1432.
[n] M. Giannella, B. V. Horn, J. G. Patton, and T. A. Pelaia, “SNS Logbook”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper RPPB04, pp. 609-611.
[n] T. Toyama, K. Ohmi, and Y. Shobuda, “Study of Impedances and Instabilities in J-PARC”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT078, pp. 1336-1338.
[n] L. R. Brederode and L. Van den Heever, “MeerKAT Project Status Report”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1531-1535. doi:10.18429/JACoW-ICALEPCS2017-THPHA066
[n] P. Chevtsov, T. Pal, and M. Dach, “MATLAB Control Applications Embedded Into Epics Process Controllers (IOC) and their Impact on Facility Operations at Paul Scherrer Institute”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 416-419. doi:10.18429/JACoW-ICALEPCS2017-TUPHA020
[n] H. Fukuma, Z. Y. Guo, and K. Ohmi, “Simulation Study of the Beam-Photoelectron Instability in BEPC”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP15H, pp. 957-959.
[n] Y. Arakaki et al., “Electrostatic Septum for 50GeV Proton Synchrotron in J-PARC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEB010, pp. 3900-3902.
[n] C. Montag et al., “Design update on the EIC electron storage ring”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPS136, unpublished.
[n] H. J. Kim and T. Sen, “Recent Improvement of Tracking Code BBSIMC”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper THPSC022, pp. 304-307.
[n] P. Chevtsov, “Device Control Tool for CEBAF Beam Diagnostics Software”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper RPPB06, pp. 615-617.
[n] T. Schietinger, “H5PartRoot - A Visualization And Post-Processing Tool For Accelerator Simulations”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper THPSC049, pp. 343-346.
[n] K. Ohmi, K. Oide, and E. Perevedentsev, “Beam-beam Limit and the Degree of Freedom”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPLS032, pp. 616-618.
[n] T. Yamazaki, M. Chiwaki, T. Mikado, T. Noguchi, S. Sugiyama, and T. Tomimasu, “Generation of Quasi-Monochromatic Photon Beams from Compton Backscatterred Laser Light at ETL Electron Storage Ring”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3406-3409.
[n] G. C. Gualco et al., “First Test of a 1.5 GHz Single Cell Accelerating Cavity Obtained by Magnetron Sputtering of Niobium”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2399-2402.
[n] S. Binello, T. D, R. A. Katz, and J. Morris, “Cybersecurity and User Accountability in the C-AD Control System”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPB30, pp. 457-459.
[n] M. T. F. Pivi et al., “Simulation of the Electron Cloud for Various Configurations of a Damping Ring for the ILC”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH075, pp. 2958-2960.
[n] A. Rousse, K. Ta Phuoc, N. Vinokurov, and O. A. Shevchenko, “Generation of X-ray FEL Light Using Laser Wakefield Accelerated Electron Beams”, in Proc. FEL'07, Novosibirsk, Russia, Aug. 2007, paper TUPPH014, pp. 252-255.
[n] Y. Luo et al., “Overview of Magnetic Nonlinear Beam Dynamics in RHIC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP006, pp. 2489-2491.
[n] M. Pugliese and M. Prica, “Remote Operations of an Accelerator Using the Grid”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WOPA02, pp. 303-306.
[n] M. G. Cherney et al., “The Development of Detector Alignment Monitoring System for the ALICE ITS”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper RPPB08, pp. 621-623.
[n] C. P. Hauri et al., “Wavelength-tunable UV Laser for Electron Beam Generation with Low Intrinsic Emittance”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD052, pp. 3213-3215.
[n] K.-U. Kasemir and E. Danilova, “Integrating the EPICS IOC Log into the CSS Message Log”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKN025, pp. 151-153.
[n] T. Sen, “Anomalous Diffusion Near Resonances”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC017, pp. 495-497.
[n] T. Tomimasu, T. Mikado, T. Noguchi, S. Sugiyama, and T. Yamazaki, “An Electron Undulating Ring for VLSI Lithography”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3403-3406.
[n] T. Saeki et al., “Studies on the Electro-Polishing process with Nb sample plates at KEK.”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO086, pp. 829-829.
[n] M. Nishiwaki et al., “Surface Study Using Niobium Sample Coupons for Super Conducting RF Cavity”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP070, pp. 984-986.
[n] O. R. Bagnato, L. Jahnel, A. C. Lira, and P. Tavares, “An Electron Gun for the LNLS Pre-Injector”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 685-688.
[n] Y. Jongen, M. Lacroix, G. Ryckewaert, and S. Zaremba, “Beam Dynamics Aspects of a High Intensity Isotope Production Cyclotron”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper G-11, pp. 260-262.
[n] M. Sekoranja, I. Verstovsek, and J. Bobnar, “Evolution of Visual DCT”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WOPA05, pp. 313-315.
[n] C. Montag et al., “Operational Experience with a Near-integer Working Point at RHIC”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP018, pp. 2563-2565.
[n] D. Neuffer, D. Stratakis, J. Eldred, and S. Nagaitsev, “Adaptation of the Fermilab proton source to support new muon facilities”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1100-1103. doi:10.18429/JACoW-IPAC2024-TUPC41
[n] M. Boscolo et al., “Machine Detector Interface for the e+e- Future Circular Collider”, in Proc. eeFACT'18, Hong Kong, China, Sep. 2018, pp. 201. doi:10.18429/JACoW-eeFACT2018-WEXBA02
[n] O. Geithner et al., “Ion-optical Measurements at CRYRING@ESR during Commissioning”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3161-3164. doi:10.18429/JACoW-IPAC2018-THPAF077
[n] K. Ohmi, S. Kamada, K. Oide, and M. Tawada, “Diffusion caused by Beam-beam Interactions with Couplings”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT108, pp. 2104-2106.
[n] E. Zimoch and A. Luedeke, “Purpose and Benefit of Control System Training for Operators”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper THBHAUST03, pp. 1186-1188.
[n] P. K. Bartkiewicz, C. Gindler, and G. K. Sahoo, “Further Improvements in Power Supply Controller Transient Recorders for Post-Mortem Analysis of BPM Orbit Dumps at PETRA-III”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 220-223. doi:10.18429/JACoW-PCaPAC2018-THP23
[n] A. V. Fedotov et al., “Beam Lifetime and Limitations during Low-Energy RHIC Operation”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP081, pp. 2285-2287.
[n] J. W. Flanagan et al., “Further Studies on Betatron Sidebands due to Electron Clouds”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH050, pp. 2898-2900.
[n] T. Sen et al., “Expected Results From Channeling Radiation Experiments at Fast”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1873-1876. doi:10.18429/JACoW-IPAC2016-TUPOW049
[n] S. Kato, M. Nishiwaki, T. Noguchi, V. Chouhan, and P. V. Tyagi, “Novel Field Emission Scanner for Surface Study of Niobium SRF Cavity”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC093, pp. 295-297.
[n] A. Winter et al., “High-precision Laser Master Oscillators for Optical Timing Distribution Systems in Future Light Sources”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH029, pp. 1064-1066.
[n] F. C. Pilat et al., “Reduction of Beta* and Increase of Luminosity at RHIC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP008, pp. 2495-2497.
[n] M. Balcewicz and J. Eldred, “Observation of a synchro-betatron instability in Fermilab booster”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2598-2600. doi:10.18429/JACoW-IPAC2024-WEPR45
[n] R. Baer, M. Schwickert, U. Weinrich, and T. Fleck, “Experiences with an Industrial Control System: Traceability of Specifications, Commissioning Support and Conclusions from the HICAT Project”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPB39, pp. 247-249.
[n] A. van der Linden et al., “80 kV Electrostatic Wire Septum for AmPS”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1510-1513.
[n] K. Fan, Y. Arakaki, and I. Sakai, “Eddy Current Effects in an Opposite-field Septum”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAN032, pp. 227-229.
[n] J. A. Pomilio, A. C. Lira, and D. Wisnivesky, “Power Supplies for the LNLS Magnets”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1922-1925.
[n] D. Mihalcea, P. Piot, D. R. Edstrom, T. Sen, and W. D. Rush, “Channeling Radiation Experiment at Fermilab ASTA”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 95-98. doi:10.18429/JACoW-IPAC2015-MOPWA009
[n] A. Winter, F. O. Ilday, and B. Steffen, “Femtosecond Yb-Doped Fiber Laser System at 1 um of Wavelength with 100-nm Bandwidth and Variable Pulse Structure for Accelerator Diagnostics”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper WEPB03, pp. 235-237.
[n] R. Nagaoka, L. Cassinari, M. D. Diop, M.-P. Level, C. Mariette, and R. Sreedharan, “Fast Beam-ion Instability Studies at SOLEIL”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD028, pp. 1985-1987.
For LaTeX
Use Complete Form
For BibTeX
References
- A. M. Barker, W. P. Grice, and W. Blokland, “Drift Compensation for the SNS Laserwire”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper RPPA30, pp. 576-578.
- M. Dach, T. Korhonen, and T. Pal, “Interfacing CANbus to EPICS at the Swiss Light Source”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP569, pp. XX-XX.
- S. Kato, H. Hayano, T. Kubo, T. Noguchi, T. Saeki, and M. Sawabe, “Study on Niobium Scratch and Tantalum or Carbonaceous Contamination at Niobium Surface with Field Emission Scanner”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper TUP108, pp. 731-735.
- K. Ohmi, Y. Funakoshi, S. Hiramatsu, K. Oide, and M. Tobiyama, “Beam-beam Limit and Feedback Noise”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS033, pp. 619-621.
- A. V. Fedotov, M. Blaskiewicz, W. Fischer, T. Satogata, and S. Tepikian, “Interplay of Space-charge and Beam-beam Effects in a Collider”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper THO1C03, pp. 634-638.
- Y. Zhang et al., “A PARMELA Model of the CEBAF Injector valid over a Wide Range of Parameters”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT165, pp. 1515-1517.
- F. S. Rafael, J. Apfelbaum, A. C. Lira, and J. A. Pomilio, “A High Voltage Resonant Converter for Pulsed Magnets”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1429-1432.
- M. Giannella, B. V. Horn, J. G. Patton, and T. A. Pelaia, “SNS Logbook”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper RPPB04, pp. 609-611.
- T. Toyama, K. Ohmi, and Y. Shobuda, “Study of Impedances and Instabilities in J-PARC”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT078, pp. 1336-1338.
- L. R. Brederode and L. Van den Heever, “MeerKAT Project Status Report”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1531-1535.
- P. Chevtsov, T. Pal, and M. Dach, “MATLAB Control Applications Embedded Into Epics Process Controllers (IOC) and their Impact on Facility Operations at Paul Scherrer Institute”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 416-419.
- H. Fukuma, Z. Y. Guo, and K. Ohmi, “Simulation Study of the Beam-Photoelectron Instability in BEPC”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP15H, pp. 957-959.
- Y. Arakaki et al., “Electrostatic Septum for 50GeV Proton Synchrotron in J-PARC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEB010, pp. 3900-3902.
- C. Montag et al., “Design update on the EIC electron storage ring”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS136, this conference.
- H. J. Kim and T. Sen, “Recent Improvement of Tracking Code BBSIMC”, in Proc. 10th Int. Computational Accelerator Physics Conf. (ICAP'09), San Francisco, CA, USA, Aug.-Sep. 2009, paper THPSC022, pp. 304-307.
- P. Chevtsov, “Device Control Tool for CEBAF Beam Diagnostics Software”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper RPPB06, pp. 615-617.
- T. Schietinger, “H5PartRoot - A Visualization And Post-Processing Tool For Accelerator Simulations”, in Proc. 10th Int. Computational Accelerator Physics Conf. (ICAP'09), San Francisco, CA, USA, Aug.-Sep. 2009, paper THPSC049, pp. 343-346.
- K. Ohmi, K. Oide, and E. Perevedentsev, “Beam-beam Limit and the Degree of Freedom”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPLS032, pp. 616-618.
- T. Yamazaki, M. Chiwaki, T. Mikado, T. Noguchi, S. Sugiyama, and T. Tomimasu, “Generation of Quasi-Monochromatic Photon Beams from Compton Backscatterred Laser Light at ETL Electron Storage Ring”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3406-3409.
- G. C. Gualco et al., “First Test of a 1.5 GHz Single Cell Accelerating Cavity Obtained by Magnetron Sputtering of Niobium”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2399-2402.
- S. Binello, T. D, R. A. Katz, and J. Morris, “Cybersecurity and User Accountability in the C-AD Control System”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WPPB30, pp. 457-459.
- M. T. F. Pivi et al., “Simulation of the Electron Cloud for Various Configurations of a Damping Ring for the ILC”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH075, pp. 2958-2960.
- A. Rousse, K. Ta Phuoc, N. Vinokurov, and O. A. Shevchenko, “Generation of X-ray FEL Light Using Laser Wakefield Accelerated Electron Beams”, in Proc. 29th Int. Free Electron Laser Conf. (FEL'07), Novosibirsk, Russia, Aug. 2007, paper TUPPH014, pp. 252-255.
- Y. Luo et al., “Overview of Magnetic Nonlinear Beam Dynamics in RHIC”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP006, pp. 2489-2491.
- M. Pugliese and M. Prica, “Remote Operations of an Accelerator Using the Grid”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WOPA02, pp. 303-306.
- M. G. Cherney et al., “The Development of Detector Alignment Monitoring System for the ALICE ITS”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper RPPB08, pp. 621-623.
- C. P. Hauri et al., “Wavelength-tunable UV Laser for Electron Beam Generation with Low Intrinsic Emittance”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD052, pp. 3213-3215.
- K.-U. Kasemir and E. Danilova, “Integrating the EPICS IOC Log into the CSS Message Log”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPKN025, pp. 151-153.
- T. Sen, “Anomalous Diffusion Near Resonances”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEC017, pp. 495-497.
- T. Tomimasu, T. Mikado, T. Noguchi, S. Sugiyama, and T. Yamazaki, “An Electron Undulating Ring for VLSI Lithography”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3403-3406.
- T. Saeki et al., “Studies on the Electro-Polishing process with Nb sample plates at KEK.”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO086, pp. 829-829.
- M. Nishiwaki et al., “Surface Study Using Niobium Sample Coupons for Super Conducting RF Cavity”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP070, pp. 984-986.
- O. R. Bagnato, L. Jahnel, A. C. Lira, and P. Tavares, “An Electron Gun for the LNLS Pre-Injector”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 685-688.
- Y. Jongen, M. Lacroix, G. Ryckewaert, and S. Zaremba, “Beam Dynamics Aspects of a High Intensity Isotope Production Cyclotron”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper G-11, pp. 260-262.
- M. Sekoranja, I. Verstovsek, and J. Bobnar, “Evolution of Visual DCT”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WOPA05, pp. 313-315.
- C. Montag et al., “Operational Experience with a Near-integer Working Point at RHIC”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP018, pp. 2563-2565.
- D. Neuffer, D. Stratakis, J. Eldred, and S. Nagaitsev, “Adaptation of the Fermilab proton source to support new muon facilities”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPC41, pp. 1100-1103.
- M. Boscolo et al., “Machine Detector Interface for the e+e- Future Circular Collider”, in Proc. 62nd ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders (eeFACT'18), Hong Kong, China, Sep. 2018, pp. 201.
- O. Geithner et al., “Ion-optical Measurements at CRYRING@ESR during Commissioning”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3161-3164.
- K. Ohmi, S. Kamada, K. Oide, and M. Tawada, “Diffusion caused by Beam-beam Interactions with Couplings”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT108, pp. 2104-2106.
- E. Zimoch and A. Luedeke, “Purpose and Benefit of Control System Training for Operators”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper THBHAUST03, pp. 1186-1188.
- P. K. Bartkiewicz, C. Gindler, and G. K. Sahoo, “Further Improvements in Power Supply Controller Transient Recorders for Post-Mortem Analysis of BPM Orbit Dumps at PETRA-III”, in Proc. 12th International Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'18), Hsinchu City, Taiwan, Oct. 2018, pp. 220-223.
- A. V. Fedotov et al., “Beam Lifetime and Limitations during Low-Energy RHIC Operation”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP081, pp. 2285-2287.
- J. W. Flanagan et al., “Further Studies on Betatron Sidebands due to Electron Clouds”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH050, pp. 2898-2900.
- T. Sen et al., “Expected Results From Channeling Radiation Experiments at Fast”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1873-1876.
- S. Kato, M. Nishiwaki, T. Noguchi, V. Chouhan, and P. V. Tyagi, “Novel Field Emission Scanner for Surface Study of Niobium SRF Cavity”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC093, pp. 295-297.
- A. Winter et al., “High-precision Laser Master Oscillators for Optical Timing Distribution Systems in Future Light Sources”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH029, pp. 1064-1066.
- F. C. Pilat et al., “Reduction of Beta* and Increase of Luminosity at RHIC”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP008, pp. 2495-2497.
- M. Balcewicz and J. Eldred, “Observation of a synchro-betatron instability in Fermilab booster”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPR45, pp. 2598-2600.
- R. Baer, M. Schwickert, U. Weinrich, and T. Fleck, “Experiences with an Industrial Control System: Traceability of Specifications, Commissioning Support and Conclusions from the HICAT Project”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TPPB39, pp. 247-249.
- A. van der Linden et al., “80 kV Electrostatic Wire Septum for AmPS”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1510-1513.
- K. Fan, Y. Arakaki, and I. Sakai, “Eddy Current Effects in an Opposite-field Septum”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAN032, pp. 227-229.
- J. A. Pomilio, A. C. Lira, and D. Wisnivesky, “Power Supplies for the LNLS Magnets”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1922-1925.
- D. Mihalcea, P. Piot, D. R. Edstrom, T. Sen, and W. D. Rush, “Channeling Radiation Experiment at Fermilab ASTA”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 95-98.
- A. Winter, F. O. Ilday, and B. Steffen, “Femtosecond Yb-Doped Fiber Laser System at 1 um of Wavelength with 100-nm Bandwidth and Variable Pulse Structure for Accelerator Diagnostics”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper WEPB03, pp. 235-237.
- R. Nagaoka, L. Cassinari, M. D. Diop, M.-P. Level, C. Mariette, and R. Sreedharan, “Fast Beam-ion Instability Studies at SOLEIL”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPD028, pp. 1985-1987.
Back to search