Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Bosotti et al., “Full Characterization of the Piezo Blade Tuner for Superconducting RF Cavities”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP120, pp. 838-840.
[n] S. C. Mun et al., “Study of Geant4 Simulation for Cyclotron Radioisotope Production in Various Target Size”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 105-107. doi:10.18429/JACoW-Cyclotrons2016-MOP20
[n] H. Sakai et al., “Precise Studies on He-Processing and HPR for Recovery From Field Emission by Using X-Ray Mapping System”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THAA06, pp. 1019-1023.
[n] C. A. Kitegi et al., “Development of a PrFeB Cryogenic Undulator at NSLS-II”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPP089, pp. 762-764.
[n] C. He?ƒler et al., “Commissioning of the Offline-teststand for the S-DALINAC Polarized Injector SPIN”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPD027, pp. 1482-1484.
[n] T. Natsui, Y. Ogawa, M. Yoshida, and X. Zhou, “Quasi Traveling Wave Side Couple RF Gun for SuperKEKB”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUOCB103, pp. 1117-1119.
[n] V. L. Auslender et al., “TRIODE RF GUN FOR LINEAR ELECTRON ACCELERATORS”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper WEHP28, pp. XX-XX.
[n] T. Bahlo, C. Burandt, R. Eichhorn, J. Enders, M. Konrad, and P. N. Nonn, “Design of a Computer Based Resonator-Simulator for Tests of RF Control Systems”, in Proc. ICAP'12, Rostock-Warnemunde, Germany, Aug. 2012, paper WEAAC4, pp. 127-129.
[n] R. Ganter et al., “Status of Athos, the Soft X-Ray FEL Line of SwissFEL”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 753-756. doi:10.18429/JACoW-FEL2019-THP085
[n] L. Leduc, G. Corti, and R. Veness, “Design of a Highly Optimised Vacuum Chamber Support for the LHCb Experiment”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS025, pp. 1581-1583.
[n] R. Stegmann et al., “Installation and Test of a Beam Loss Monitor System for the S-DALINAC”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPR014, pp. 804-806.
[n] J. C. Lee et al., “Design and Analysis of an Electron Beam in an Electron Gun for X-Ray Radiotherapy”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 688-691. doi:10.18429/JACoW-IPAC2014-MOPRI040
[n] V. P. Cherepanov, E. N. Dementyev, E. B. Levichev, A. S. Medvedko, V. V. Smaluk, and D. P. Sukhanov, “Transverse Bunch-by-Bunch Feedback for the VEPP-4M Electron-Positron Collider”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper WEPC26, pp. 367-369.
[n] D. Olsson et al., “Commissioning Status of the Chopper System for the MAX IV Injector”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 316-319. doi:10.18429/JACoW-LINAC2016-MOP106015
For LaTeX
Use Complete Form
For BibTeX
References
- A. Bosotti et al., “Full Characterization of the Piezo Blade Tuner for Superconducting RF Cavities”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP120, pp. 838-840.
- S. C. Mun et al., “Study of Geant4 Simulation for Cyclotron Radioisotope Production in Various Target Size”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 105-107.
- H. Sakai et al., “Precise Studies on He-Processing and HPR for Recovery From Field Emission by Using X-Ray Mapping System”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THAA06, pp. 1019-1023.
- C. A. Kitegi et al., “Development of a PrFeB Cryogenic Undulator at NSLS-II”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPP089, pp. 762-764.
- C. He?ƒler et al., “Commissioning of the Offline-teststand for the S-DALINAC Polarized Injector SPIN”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPD027, pp. 1482-1484.
- T. Natsui, Y. Ogawa, M. Yoshida, and X. Zhou, “Quasi Traveling Wave Side Couple RF Gun for SuperKEKB”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUOCB103, pp. 1117-1119.
- V. L. Auslender et al., “TRIODE RF GUN FOR LINEAR ELECTRON ACCELERATORS”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper WEHP28, pp. XX-XX.
- T. Bahlo, C. Burandt, R. Eichhorn, J. Enders, M. Konrad, and P. N. Nonn, “Design of a Computer Based Resonator-Simulator for Tests of RF Control Systems”, in Proc. 11th Int. Computational Accelerator Physics Conf. (ICAP'12), Rostock-Warnemunde, Germany, Aug. 2012, paper WEAAC4, pp. 127-129.
- R. Ganter et al., “Status of Athos, the Soft X-Ray FEL Line of SwissFEL”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 753-756.
- L. Leduc, G. Corti, and R. Veness, “Design of a Highly Optimised Vacuum Chamber Support for the LHCb Experiment”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS025, pp. 1581-1583.
- R. Stegmann et al., “Installation and Test of a Beam Loss Monitor System for the S-DALINAC”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPR014, pp. 804-806.
- J. C. Lee et al., “Design and Analysis of an Electron Beam in an Electron Gun for X-Ray Radiotherapy”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 688-691.
- V. P. Cherepanov, E. N. Dementyev, E. B. Levichev, A. S. Medvedko, V. V. Smaluk, and D. P. Sukhanov, “Transverse Bunch-by-Bunch Feedback for the VEPP-4M Electron-Positron Collider”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper WEPC26, pp. 367-369.
- D. Olsson et al., “Commissioning Status of the Chopper System for the MAX IV Injector”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 316-319.
Back to search