Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] C. Liu et al., “Update of the EIC HSR injection system design”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper TUP103, unpublished.
[n] A. Eager and S. Doebert, “Simulations and experimental commissioning results of the AWAKE Run 2 photoinjector”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1171-1174. doi:10.18429/JACoW-IPAC2025-TUPM004
[n] J. C. Smith, J. E. Doyle, L. Keller, S. A. Lundgren, and T. W. Markiewicz, “Mechanical and Thermal Prototype Testing for a Rotatable Collimator for the LHC Phase II Collimation Upgrade”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC095, pp. 286-288.
[n] J. P. Potier and L. Rinolfi, “The LEP Pre-Injector as a Multipurpose Facility”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP17H, pp. 859-861.
[n] V. A. Goryashko and V. G. Ziemann, “Longitudinal Coherence in an FEL With a Reduced Level of Shot Noise”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper WEOANO03, pp. 469-473.
[n] J. C. Smith, J. E. Doyle, L. Keller, L. Lari, S. A. Lundgren, and T. W. Markiewicz, “Design of a Rotatable Copper Collimator for the LHC Phase II Collimation Upgrade”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC096, pp. 289-291.
[n] A. Noda et al., “Experimental Strategy for Realization of 3-D Beam Ordering with Use of Tapered Cooling at S-LSR”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper WEAY06, pp. 231-235.
[n] S. Jolly, R. T. P. D, A. P. Letchford, and J. K. Pozimski, “Acceptance and Transmission Simulations of the FETS RFQ”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWA041, pp. 3720-3722.
[n] P. V. Verdier, R. Bourtembourg, J-F. B. Bouteille, P. Falaise, and J. M. Koch, “ESRF Ramping Injector Power Supply Controlled by Tango”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 739-740. doi:10.18429/JACoW-ICALEPCS2017-TUPHA139
[n] R. Corsini, J.-P. Potier, L. Rinolfi, and T. Risselada, “Isochronous Optics and Related Measurements in EPA”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP6B07, pp. 1021-1023.
[n] P. A. Coe, A. Reichold, D. Urner, and M. S. Warden, “Nanometre Precision Interferometric Stability Monitoring Systems for Key Accelerator Components”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC121, pp. 1350-1352.
[n] S. Udrea et al., “Preparatory Work for a Fluorescence Based Profile Monitor for an Electron Lens”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 528-531. doi:10.18429/JACoW-IBIC2016-TUPG73
[n] V. G. Dudnikov et al., “Saddle Antenna RF Ion Sources for Efficient Positive and Negative Ions Production”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 4060-4062. doi:10.18429/JACoW-IPAC2015-THPF143
[n] B. Xiao et al., “Commissioning of the SRF Surface Impedance Characterization System at Jefferson Lab”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP061, pp. 2144-2146.
[n] P. P. Schneider et al., “Space-Charge Compensation in the Transition Area Between LEBT and RFQ”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4425-4428. doi:10.18429/JACoW-IPAC2017-THPVA006
[n] L. Rinolfi, “Design of the NLC Positron Source”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper THP03, pp. 647-649.
[n] C. Hauviller, “The New ISR Absorber Blocks for High Intensity Beams”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4134-4137.
[n] F. Schmidt-Foehre, L. Froehlich, D. Noelle, R. Susen, and K. Wittenburg, “Commissioning of the New Online-Radiation-Monitoring-System at the New European XFEL Injector with First Tests of the High-Sensitivity-Mode for Intra-Tunnel Rack Surveillance”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 585-589. doi:10.18429/JACoW-IBIC2015-WECLA02
[n] M. Hamberg and V. G. Ziemann, “Status of the EU-XFELl Laser Heater”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUPSO25, pp. 271-275.
[n] M. Kobal, J. F. Bergoz, J. Dedic, and R. Stefanic, “A Complete Solution for Beam Loss Monitoring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC050, pp. 1170-1172.
[n] O. Groebner and C. Hauviller, “Design Aspects of LEP Experimental Vacuum Chambers”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1642-1645.
[n] F. Marhauser, T. S. Elliott, and R. A. Rimmer, “Investigations on Absorber Materials at Cryogenic Temperatures”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP009, pp. 2799-2801.
[n] A. Kurup et al., “Optimisation of the Beam Line for COMET Phase-I”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPEA074, pp. 2681-2683.
[n] A. Ferrari, A. Latina, L. Rinolfi, and F. Tecker, “Beam Dynamics Studies in the CLIC Injector Linac”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN058, pp. 2838-2840.
[n] L. Falbo, E. Bressi, and C. Priano, “Optimization of Carbon Treatments at CNAO”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1197-1199. doi:10.18429/JACoW-IPAC2017-MOPVA146
[n] K. Zhou et al., “Commissioning of the 2x4-cell Superconducting Accelerator for the CAEP THz-FEL Facility”, in Proc. SAP'17, Jishou, China, Aug. 2017, pp. 96-98. doi:10.18429/JACoW-SAP2017-MOPH30
[n] F. Stulle, A. Ferrari, A. Latina, L. Rinolfi, and D. Schulte, “CLIC Main Beam Dynamics in the Ring to Main Linac Transport”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP047, pp. 3814-3816.
[n] G. W. Foster, Jr. Kashikhin, and V. Kashikhin, “Pole Profile Optimization of VLHC Transmission Line Magnet”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP02A, pp. 1934-1936.
[n] L. Weissman et al., “Installation and Commissioning of the Upgraded SARAF 4-rods RFQ”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 75-79. doi:10.18429/JACoW-HB2018-TUA1WC01
[n] D. Lipka, “Cavity BPM Designs, Related Electronics and Measured Performances”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUOC02, pp. 280-284.
[n] Y. I. Kim et al., “Development of Electronics for the ATF2 Interaction Point Region Beam Position Monitor”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE035, pp. 1050-1052.
[n] V. V. Borisov et al., “Magnetic Measurements of NICA Booster Dipoles”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3458-3460. doi:10.18429/JACoW-IPAC2017-WEPVA087
[n] E. E. Donets, E. D. Donets, and E. M. Syresin, “HEAVY ION INJECTION INTO SYNCHROTRONS, BASED ON ELECTRON STRING ION SOURCES”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper TUIP17, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- C. Liu et al., “Update of the EIC HSR injection system design”, presented at the 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, paper TUP103, unpublished.
- A. Eager and S. Doebert, “Simulations and experimental commissioning results of the AWAKE Run 2 photoinjector”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPM004, pp. 1171-1174.
- J. C. Smith, J. E. Doyle, L. Keller, S. A. Lundgren, and T. W. Markiewicz, “Mechanical and Thermal Prototype Testing for a Rotatable Collimator for the LHC Phase II Collimation Upgrade”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC095, pp. 286-288.
- J. P. Potier and L. Rinolfi, “The LEP Pre-Injector as a Multipurpose Facility”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP17H, pp. 859-861.
- V. A. Goryashko and V. G. Ziemann, “Longitudinal Coherence in an FEL With a Reduced Level of Shot Noise”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper WEOANO03, pp. 469-473.
- J. C. Smith, J. E. Doyle, L. Keller, L. Lari, S. A. Lundgren, and T. W. Markiewicz, “Design of a Rotatable Copper Collimator for the LHC Phase II Collimation Upgrade”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC096, pp. 289-291.
- A. Noda et al., “Experimental Strategy for Realization of 3-D Beam Ordering with Use of Tapered Cooling at S-LSR”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper WEAY06, pp. 231-235.
- S. Jolly, R. T. P. D, A. P. Letchford, and J. K. Pozimski, “Acceptance and Transmission Simulations of the FETS RFQ”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWA041, pp. 3720-3722.
- P. V. Verdier, R. Bourtembourg, J-F. B. Bouteille, P. Falaise, and J. M. Koch, “ESRF Ramping Injector Power Supply Controlled by Tango”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 739-740.
- R. Corsini, J.-P. Potier, L. Rinolfi, and T. Risselada, “Isochronous Optics and Related Measurements in EPA”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP6B07, pp. 1021-1023.
- P. A. Coe, A. Reichold, D. Urner, and M. S. Warden, “Nanometre Precision Interferometric Stability Monitoring Systems for Key Accelerator Components”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC121, pp. 1350-1352.
- S. Udrea et al., “Preparatory Work for a Fluorescence Based Profile Monitor for an Electron Lens”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 528-531.
- V. G. Dudnikov et al., “Saddle Antenna RF Ion Sources for Efficient Positive and Negative Ions Production”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 4060-4062.
- B. Xiao et al., “Commissioning of the SRF Surface Impedance Characterization System at Jefferson Lab”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP061, pp. 2144-2146.
- P. P. Schneider et al., “Space-Charge Compensation in the Transition Area Between LEBT and RFQ”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4425-4428.
- L. Rinolfi, “Design of the NLC Positron Source”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper THP03, pp. 647-649.
- C. Hauviller, “The New ISR Absorber Blocks for High Intensity Beams”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4134-4137.
- F. Schmidt-Foehre, L. Froehlich, D. Noelle, R. Susen, and K. Wittenburg, “Commissioning of the New Online-Radiation-Monitoring-System at the New European XFEL Injector with First Tests of the High-Sensitivity-Mode for Intra-Tunnel Rack Surveillance”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 585-589.
- M. Hamberg and V. G. Ziemann, “Status of the EU-XFELl Laser Heater”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper TUPSO25, pp. 271-275.
- M. Kobal, J. F. Bergoz, J. Dedic, and R. Stefanic, “A Complete Solution for Beam Loss Monitoring”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC050, pp. 1170-1172.
- O. Groebner and C. Hauviller, “Design Aspects of LEP Experimental Vacuum Chambers”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1642-1645.
- F. Marhauser, T. S. Elliott, and R. A. Rimmer, “Investigations on Absorber Materials at Cryogenic Temperatures”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP009, pp. 2799-2801.
- A. Kurup et al., “Optimisation of the Beam Line for COMET Phase-I”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPEA074, pp. 2681-2683.
- A. Ferrari, A. Latina, L. Rinolfi, and F. Tecker, “Beam Dynamics Studies in the CLIC Injector Linac”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN058, pp. 2838-2840.
- L. Falbo, E. Bressi, and C. Priano, “Optimization of Carbon Treatments at CNAO”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1197-1199.
- K. Zhou et al., “Commissioning of the 2x4-cell Superconducting Accelerator for the CAEP THz-FEL Facility”, in Proc. 13th Symposium on Accelerator Physics (SAP'17), Jishou, China, Aug. 2017, pp. 96-98.
- F. Stulle, A. Ferrari, A. Latina, L. Rinolfi, and D. Schulte, “CLIC Main Beam Dynamics in the Ring to Main Linac Transport”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6PFP047, pp. 3814-3816.
- G. W. Foster, Jr. Kashikhin, and V. Kashikhin, “Pole Profile Optimization of VLHC Transmission Line Magnet”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP02A, pp. 1934-1936.
- L. Weissman et al., “Installation and Commissioning of the Upgraded SARAF 4-rods RFQ”, in Proc. 61st ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'18), Daejeon, Korea, Jun. 2018, pp. 75-79.
- D. Lipka, “Cavity BPM Designs, Related Electronics and Measured Performances”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUOC02, pp. 280-284.
- Y. I. Kim et al., “Development of Electronics for the ATF2 Interaction Point Region Beam Position Monitor”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE035, pp. 1050-1052.
- V. V. Borisov et al., “Magnetic Measurements of NICA Booster Dipoles”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3458-3460.
- E. E. Donets, E. D. Donets, and E. M. Syresin, “HEAVY ION INJECTION INTO SYNCHROTRONS, BASED ON ELECTRON STRING ION SOURCES”, in Proc. 19th Russian Particle Accelerator Conf. (RuPAC'04), Dubna, Russia, Oct. 2004, paper TUIP17, pp. XX-XX.
Back to search