Favourites
For Word
[n] M. Filtz, “Coupling Impedances of Muffin-Tin Structures with Closed and Open Sides”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPC28, pp. 2373-2375.
[n] H. Tochon-Danguy, G. Egan, J. I. Sachinidis, P. U, and B. Mukherjee, “Occupational Radiation Exposure at the Self-Shielded IBA cyclone 10/5 Cyclotron of the ARMC, Melbourne Australia”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper A-25, pp. 105-107.
[n] M. A. Zavialov, “Accelerators Application for Radiation Processing of Foodstuffs”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper FRCB03, pp. 470-472.
[n] P. Antonini et al., “Diagnostic Tool and Instrumentation for Handling 50 kW Beam Power”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 184-185. doi:10.18429/JACoW-Cyclotrons2016-TUP09
[n] D. E. Young, “Drift Tube Structures”, in Proc. LINAC'63, New Heaven, CT, USA, Oct. 1963, paper 6-01, pp. 204-220.
[n] M. A. Araya et al., “A New ACS Bulk Data Transfer Service for CTA”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1116-1120. doi:10.18429/JACoW-ICALEPCS2017-THBPL03
[n] M. V. Zdorovets, V. V. Alexandrenko, I. A. Ivanov, M. V. Koloberdin, and Y. K. Sambayev, “Accelerator Complex Based on DC-60 Cyclotron”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper THCA01, pp. 287-289.
[n] M. G. Giacchini et al., “The Control System of SPES Target: Current Status and Perspectives.”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP086, pp. 278-280.
[n] U. Ratzinger and B. Schlitt, “Design of a Carbon Injector for a Medical Accelerator Complex”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP08C, pp. 2377-2382.
[n] A. Galat?á et al., “Towards the First Beams from the ADIGE Injector for the SPES Project”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3647-3649. doi:10.18429/JACoW-IPAC2019-THPGW030
[n] B. Mukherjee, “Research Applications of the Health Physics Surveillance System at the Australian National Medical Cyclotron”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper B-31, pp. 264-267.
[n] M. Filtz, “Analytical Calculation of Radiation in a Side Coupled mm-Wave Accelerating Structure”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP067G, pp. 1277-1279.
[n] D. Carbajo Perez et al., “Operational Feedback and Analysis of Current and Future Designs of the Injection Protection Absorbers in the Large Hadron Collider at CERN”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3517-3520. doi:10.18429/JACoW-IPAC2017-WEPVA108
[n] X. Yang, M. Li, W. Li, and X. J. Shu, “The FEL-THz Facility Driven by a Photo-cathode Injector”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUOD03, pp. 452-454.
[n] S. M. Wei, S. An, M. Li, P. Z. Li, G. F. Song, and T. J. Zhang, “Envelope Control of the Extracted Beam From Compact Cyclotron”, in Proc. SAP'17, Jishou, China, Aug. 2017, pp. 31-33. doi:10.18429/JACoW-SAP2017-MOPH03
[n] C.-F. Wu et al., “Prelimimary Study of the Higher-harmonic Cavity for the Upgrade Project of Hefei Light Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA028, pp. 3741-3743.
[n] Y. Ishi et al., “Practical Betatron Tune Behavior During Acceleration in Scaling FFAG Rings at KURNS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3287-3289. doi:10.18429/JACoW-IPAC2018-THPAK034
[n] Y. Mori, S. Fukumoto, K. Ikegami, and A. Takagi, “Optically Pumped Polarized Ion Source with 16.5-GHz ECR Ion Source”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2740-2743.
[n] A. Oeftiger, “Requirements and Results for Quadrupole Mode Measurements”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 393-398. doi:10.18429/JACoW-HB2018-THA1WE02
[n] T. Toyama, K. Ohmi, and Y. Shobuda, “Study of Impedances and Instabilities in J-PARC”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT078, pp. 1336-1338.
[n] B. Salvachua et al., “Handling 1 MW Losses with the LHC Collimation System”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 174-177. doi:10.18429/JACoW-IPAC2014-MOPRO043
[n] P. L. Fan, X. He, J. Pang, and L. Yang, “The Beam Dynamics Simulation of an L-band Electron Gun using Genetic Algorithm”, in Proc. SAP'17, Jishou, China, Aug. 2017, pp. 47-48. doi:10.18429/JACoW-SAP2017-MOPH10
[n] M. Won and B. S. Lee, “The Design of 28 GHz ECR Ion Source for the Compact Linear Accelerator in Korea”, in Proc. ECRIS'10, Grenoble, France, Aug. 2010, paper MOPOT014, pp. 67-67.
[n] C. Campisano, L. Celona, G. Ciavola, S. Gammino, and S. Marletta, “Installation of TRIPS at INFN-LNS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP6B03, pp. 1592-1594.
[n] J. Preble, “Operating Experience in SRF Electron Linacs”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95E04, pp. 173-180.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Filtz, “Coupling Impedances of Muffin-Tin Structures with Closed and Open Sides”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPC28, pp. 2373-2375.
- H. Tochon-Danguy, G. Egan, J. I. Sachinidis, P. U, and B. Mukherjee, “Occupational Radiation Exposure at the Self-Shielded IBA cyclone 10/5 Cyclotron of the ARMC, Melbourne Australia”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper A-25, pp. 105-107.
- M. A. Zavialov, “Accelerators Application for Radiation Processing of Foodstuffs”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper FRCB03, pp. 470-472.
- P. Antonini et al., “Diagnostic Tool and Instrumentation for Handling 50 kW Beam Power”, in Proc. 21th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'16), Zurich, Switzerland, Sep. 2016, pp. 184-185.
- D. E. Young, “Drift Tube Structures”, in Proc. 1963 Conf. on Proton Linear Accelerators (LINAC'63), New Heaven, CT, USA, Oct. 1963, paper 6-01, pp. 204-220.
- M. A. Araya et al., “A New ACS Bulk Data Transfer Service for CTA”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1116-1120.
- M. V. Zdorovets, V. V. Alexandrenko, I. A. Ivanov, M. V. Koloberdin, and Y. K. Sambayev, “Accelerator Complex Based on DC-60 Cyclotron”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper THCA01, pp. 287-289.
- M. G. Giacchini et al., “The Control System of SPES Target: Current Status and Perspectives.”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP086, pp. 278-280.
- U. Ratzinger and B. Schlitt, “Design of a Carbon Injector for a Medical Accelerator Complex”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP08C, pp. 2377-2382.
- A. Galat?á et al., “Towards the First Beams from the ADIGE Injector for the SPES Project”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3647-3649.
- B. Mukherjee, “Research Applications of the Health Physics Surveillance System at the Australian National Medical Cyclotron”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper B-31, pp. 264-267.
- M. Filtz, “Analytical Calculation of Radiation in a Side Coupled mm-Wave Accelerating Structure”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP067G, pp. 1277-1279.
- D. Carbajo Perez et al., “Operational Feedback and Analysis of Current and Future Designs of the Injection Protection Absorbers in the Large Hadron Collider at CERN”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3517-3520.
- X. Yang, M. Li, W. Li, and X. J. Shu, “The FEL-THz Facility Driven by a Photo-cathode Injector”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper TUOD03, pp. 452-454.
- S. M. Wei, S. An, M. Li, P. Z. Li, G. F. Song, and T. J. Zhang, “Envelope Control of the Extracted Beam From Compact Cyclotron”, in Proc. 13th Symposium on Accelerator Physics (SAP'17), Jishou, China, Aug. 2017, pp. 31-33.
- C.-F. Wu et al., “Prelimimary Study of the Higher-harmonic Cavity for the Upgrade Project of Hefei Light Source”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEA028, pp. 3741-3743.
- Y. Ishi et al., “Practical Betatron Tune Behavior During Acceleration in Scaling FFAG Rings at KURNS”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3287-3289.
- Y. Mori, S. Fukumoto, K. Ikegami, and A. Takagi, “Optically Pumped Polarized Ion Source with 16.5-GHz ECR Ion Source”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2740-2743.
- A. Oeftiger, “Requirements and Results for Quadrupole Mode Measurements”, in Proc. 61st ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'18), Daejeon, Korea, Jun. 2018, pp. 393-398.
- T. Toyama, K. Ohmi, and Y. Shobuda, “Study of Impedances and Instabilities in J-PARC”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT078, pp. 1336-1338.
- B. Salvachua et al., “Handling 1 MW Losses with the LHC Collimation System”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 174-177.
- P. L. Fan, X. He, J. Pang, and L. Yang, “The Beam Dynamics Simulation of an L-band Electron Gun using Genetic Algorithm”, in Proc. 13th Symposium on Accelerator Physics (SAP'17), Jishou, China, Aug. 2017, pp. 47-48.
- M. Won and B. S. Lee, “The Design of 28 GHz ECR Ion Source for the Compact Linear Accelerator in Korea”, in Proc. 19th Int. Workshop on ECR Ion Sources (ECRIS'10), Grenoble, France, Aug. 2010, paper MOPOT014, pp. 67-67.
- C. Campisano, L. Celona, G. Ciavola, S. Gammino, and S. Marletta, “Installation of TRIPS at INFN-LNS”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP6B03, pp. 1592-1594.
- J. Preble, “Operating Experience in SRF Electron Linacs”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95E04, pp. 173-180.
Back to search