JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	N. A. Brown, G. H. Gillespie, B. W. Hill, M. C. Lampel, H. Martono, and J. M. Moore, “The Particle Beam Optics Laboratory PBO Lab Trade Mark: A New Education and Training Aid”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP09C, pp. 1183-1185. 
[n]	S. Sabounchi, H. Afarideh, R. Solhju, M. R. Asadi, J.-S. Chai, and M. Ghergherehchi, “Stress and Strain Analysis of the 10 MeV Cyclotron Magnet”, in Proc. ICAP'15, Shanghai, China, Oct. 2015, pp. 71-73. doi:10.18429/JACoW-ICAP2015-WEP03
[n]	G. H. Gillespie and B. W. Hill, “Table of Contents - xxviii New Graphic User Interface for the Charged Particle Beam Program PARMILA”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPB14, pp. 2300-2302. 
[n]	P. Zisopoulos, F. Antoniou, H. Bartosik, and Y. Papaphilippou, “Optics considerations for the Delay Loop in the CLIC Damping Rings Complex”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC049, pp. 1108-1110. 
[n]	P. Fasella, “Science and Technology in the European Community”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 374-377. 
[n]	V. Pirozhenko et al., “Compact Electron Linacs for Radiation Technology Systems”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH031, pp. 2515-2517. 
[n]	L. W. Alvarez, “History of Proton Linear Accelerators”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper MO1-1, pp. 3-9. 
[n]	V. Pirozhenko, T. Myers, and O. and HILBILAC Study Team Plink, “Scheme and Parameters of a 250-mA, 20 MeV CW Proton Accelerator”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 261-264. 
[n]	A. Susini and R. Ahgren, “Design and Operation of the RF-System for the Vicksi Cyclotron”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1710-1713. 
[n]	T. S. Ueng, K. T. Hsu, C. S. Fang, Y. M. Chang, and K. K. Lin, “Turn-by-Turn Beam Position Measurement for 1.3 GeV Booster Synchrotron”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPQ32, pp. 2524-2526. 
[n]	R. E. Laxdal, “Acceleration above the Coulomb Barrier - Completion of the ISAC-II Project at TRIUMF”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper THM1CIO02, pp. 359-364. 
[n]	D. Boussard, P. Baudrenghien, T. Linnecar, G. Rogner, and W. Sinclair, “The 100 MHz RF System for the CERN Collider”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 991-994. 
[n]	M. Venturini, A. Dragt, and A. Wolski, “Wigglers and Single-Particle Dynamics in the NLC Damping Rings”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAB023, pp. 2772-2774. 
[n]	H. Nair, V. Dev, M. K. Nayak, P. K. Sarkar, D. N. Sharma, and V. Verma, “Radiation Safety Considerations of the Operation of INDUS-1 Synchrotron Radiation Source”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUPMA015, pp. 121-123. 
[n]	R. T. Avery, W. W. Chupp, H. P. Hernandez, J. R. Meneghetti, and W. W. Salsig, “Mechanical Features of Electron-Ring Compressors”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 488-491. 
[n]	J. L. Vignet et al., “The Beam Profile Monitor for SPIRAL2”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPB07, pp. 176-178. 
[n]	R. B. Meinke, J. Lammers, P. J. Masson, and G. M. Stelzer, “Direct Double-Helix Magnet Technology”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP041, pp. 229-231. 
[n]	D. Shuman, E. Henestroza, G. Ritchie, D. L. Vanecek, W. Waldron, and S. Yu, “A Pulsed Solenoid for Intense Ion Beam Transport”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT069, pp. 3798-3800. 
[n]	G. H. Gillespie, B. W. Hill, and J. M. Moore, “Solving Complex Beamline Fitting and Optimization Problems with the Particle Beam Optics Lab PBO LabTM”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP6A10, pp. 1375-1377. 
[n]	R. T. Avery, A. Faltens, and E. C. Hartwig, “Non-Intercepting Monitor of Beam Current and Position”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 920-923. 
[n]	G. Brianti LHC Working Group, “The Large Hadron Collider (LHC) in the LEP Tunnel”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 361-366. 
[n]	P. Mandrillon, N. Brassart, F. Farley, J. Herault, R. Ostojic, and A. Susini, “Commissioning and Implementation of the MEDICYC Cyclotron Programme”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper E-05, pp. 156-159. 
[n]	P. Bertrand and A. Savalle, “Post-acceleration of High Intensity RIB through the CIME Cyclotron in the Frame of the SPIRAL2 Project at GANIL”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper THM1CIO01, pp. 354-358. 
[n]	P. Chauvel et al., “Status Report on the Installation of Proton and Neutrontherapy in Centre Antoine-Lacassagne”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1815-1818. 
[n]	R. A. Early, J. K. Cobb, and J. E. Oijala, “Design Calculations and Measurements of a Dipole Magnet with Permendur Pole Pieces”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 351-354. 
[n]	C. E. Mitchell and A. Dragt, “Computation of transfer maps from magnetic field data in large aspect-ratio apertures”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper WEPPP08, pp. 198-200. 
[n]	J. L. Belmont, J. M. Bois, and J. Ferm, “Status Report on Axial Injection in the Grenoble Cyclotron”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 204-211. 
[n]	K. Torikai, Y. Arakida, Y. Shimosaki, and K. Takayama, “Fully Digitized Synchronizing and Orbit Feed-back Control System in the KEK Induction Synchrotron”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH094, pp. 3012-3013. 
[n]	C. E. Mitchell and A. Dragt, “Calculation of Realistic Charged-Particle Transfer Maps”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper MO3IOPK03, pp. XX-XX. 
[n]	R. M. Hutcheon, F. P. Adams, P. Lucuta, J. E. McGregor, B. H. Smith, and M. S. de Jong, “Measurements of High-Temperature rf and Microwave Properties of Selected Aluminas and Ferrites Used in Accelerators”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 795-798. 
[n]	N. Rahimpour Kalkhoran, H. Afarideh, R. Solhju, and M. Ghergherehchi, “Design and Simulation of 18 MeV Cyclotron Magnet by TOSCA Code”, in Proc. ICAP'15, Shanghai, China, Oct. 2015, pp. 77-80. doi:10.18429/JACoW-ICAP2015-WEP09
[n]	X. Chang et al., “Rotating Dipole and Quadrupole Field for a Multiple Cathode System”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP147, pp. 1106-1108. 
[n]	M. N. Smolyakov, “Analytical Calculation of Three-Dimensional Magnetic Fields for Insertion Devices”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH017, pp. 2479-2481. 
[n]	P. A. Corlett, A. J. Moss, and J. F. Orrett, “MICE RF Test Stand”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH152, pp. 1379-1381. 
[n]	G. O. Rodrigues, D. Kanjilal, N. Kumar, K. Mal, Y. Mathur, and A. Roy, “Frequency Tuning Effect On The Bremsstrahlung Spectra, Beam Intensity And Shape In An ECR Ion Source”, in Proc. ECRIS'14, Nizhny Novgorod, Russia, Aug. 2014, paper MOOBMH03, pp. 15-19. 
[n]	E. G. Michaelis, “Review of Meson Factories”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1385-1397. 
[n]	M. A. Green et al., “Insertion Device Commmissioning at SRC”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH009, pp. 2462-2464. 
[n]	Y. Higurashi, T. Nakagawa, J. Ohnishi, and K. Ozeki, “Emittance Measurements For RIKEN 28 GHz SC-ECRIS”, in Proc. ECRIS'14, Nizhny Novgorod, Russia, Aug. 2014, paper MOOBMH02, pp. 10-14. 
[n]	D. Stratakis, “Phase-Space Analysis Using Tomography for the Muon g-2 Experiment at Fermilab”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 462-465. doi:10.18429/JACoW-IPAC2017-MOPAB140
[n]	G. H. Gillespie et al., “A Multi-Platform Graphic User Interface for the Particle Optics Code MARYLIE”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4035, pp. 848-850. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search