Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] F. Trinkel, F. Hinder, D. Shergelashvili, and H. Soltner, “Beam Based Calibration of a Rogowski Coil Used as a Horizontal and Vertical Beam Position Monitor”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 302-306. doi:10.18429/JACoW-IBIC2016-TUPG01
[n] G.-T. Park, J. Guo, H. Wang, A. Overstreet, B. P. Xiao, and T. Xin, “Improvement of Wire-Stretching Technique to the RF Measurements of E-Center and Multipole Field for the Dipole Cavities”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4885-4888. doi:10.18429/JACoW-IPAC2018-THPML095
[n] Y. Dutheil, “Bmad Model of COSY, Status and Progress”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3437-3439. doi:10.18429/JACoW-IPAC2016-THPMR021
[n] S. Danzeca, “Developing Electronics for Radiation Environments”, presented at the IBIC'20, Santos, Brazil, Sep. 2020, paper FRAO01, unpublished.
[n] Y. Ma et al., “The TRIUMF/VECC Injector Cryomodule Performance”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 144-147. doi:10.18429/JACoW-SRF2017-MOPB042
[n] A. Ushakov, P. Echevarria, and A. Neumann, “Detuning Compensation in SC Cavities Using Kalman Filters”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3938-3940. doi:10.18429/JACoW-IPAC2017-THPAB095
[n] H. S. Xu, W.-H. Huang, C.-X. Tang, and S.-Y. Lee, “Design of a Compact Storage Ring for the TTX”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC045, pp. 3005-3007.
[n] I. Hofmann, G. Franchetti, and S.-Y. Lee, “Scaling laws for space charge resonances”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper WEBX05, pp. 268-270.
[n] F. Meot, H. Huang, and N. Tsoupas, “Stable Spin Direction Investigations in RHIC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2442-2444. doi:10.18429/JACoW-IPAC2016-WEPMW011
[n] R. B. Palmer et al., “Cooling Scheme for a Muon Collider”, in Proc. COOL'07, Bad Kreuznach, Germany, Sep. 2007, paper TUM2I06, pp. 77-81.
[n] M. Blaskiewicz, J. M. Brennan, and F. Severino, “Stochastic Cooling of High-Energy Bunched Beams”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEYC02, pp. 2014-2018.
[n] K. A. Brown, L. Ahrens, F. Severino, K. S. Smith, and M. Wilinski, “AGS Booster Beam Position, Tune, and Longitudinal Profile Data Acquisition System”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB012, pp. 2441-2443.
[n] T. Katayama et al., “Bunched Beam Stochastic Cooling at COSY”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD064, pp. 834-836.
[n] P. Schnizer, K. Aulenbacher, E. S. Fischer, A. Jankowiak, U. Ludwig-Mertin, and C. Montag, “Magnet Design of the ENC@FAIR Interaction Region”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB026, pp. 334-336.
[n] M. Marchetto et al., “The ISAC-II Linac Performance”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper WEM2I01, pp. 175-179.
[n] F. Zimmermann, M. Benedikt, and A.-S. Mueller, “The Future Circular Collider Study”, in Proc. IPAC'20, Caen, France, May 2020, pp. 6. doi:10.18429/JACoW-IPAC2020-MOVIR01
[n] H. Maesaka, “Full Energy Injection from the Sacla into the Spring-8 Storage Ring”, in Proc. IPAC'20, Caen, France, May 2020, paper FRXPLM02, pp. XX-XX.
[n] K. Zhao et al., “Research on Peking University Superconducting Accelerator Facility (PKU-SCAF)”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH312, pp. 2426-2428.
[n] L. X. Hu et al., “Collimator for Beam Position Measurement and Beam Collimation for Cyclotron”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 224-227. doi:10.18429/JACoW-IBIC2018-TUPA07
[n] W. Zhang and Y. Zhu, “A Novel Attempt to Develop a Linear Polarization Adjustable Undulator Based on Magnetic Force Compensation Technology”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 140-142. doi:10.18429/JACoW-MEDSI2018-TUPH42
For LaTeX
Use Complete Form
For BibTeX
References
- F. Trinkel, F. Hinder, D. Shergelashvili, and H. Soltner, “Beam Based Calibration of a Rogowski Coil Used as a Horizontal and Vertical Beam Position Monitor”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 302-306.
- G.-T. Park, J. Guo, H. Wang, A. Overstreet, B. P. Xiao, and T. Xin, “Improvement of Wire-Stretching Technique to the RF Measurements of E-Center and Multipole Field for the Dipole Cavities”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4885-4888.
- Y. Dutheil, “Bmad Model of COSY, Status and Progress”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3437-3439.
- S. Danzeca, “Developing Electronics for Radiation Environments”, presented at the 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, paper FRAO01, unpublished.
- Y. Ma et al., “The TRIUMF/VECC Injector Cryomodule Performance”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 144-147.
- A. Ushakov, P. Echevarria, and A. Neumann, “Detuning Compensation in SC Cavities Using Kalman Filters”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3938-3940.
- H. S. Xu, W.-H. Huang, C.-X. Tang, and S.-Y. Lee, “Design of a Compact Storage Ring for the TTX”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC045, pp. 3005-3007.
- I. Hofmann, G. Franchetti, and S.-Y. Lee, “Scaling laws for space charge resonances”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper WEBX05, pp. 268-270.
- F. Meot, H. Huang, and N. Tsoupas, “Stable Spin Direction Investigations in RHIC”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2442-2444.
- R. B. Palmer et al., “Cooling Scheme for a Muon Collider”, in Proc. 6th Workshop on Beam Cooling and Related Topics (COOL'07), Bad Kreuznach, Germany, Sep. 2007, paper TUM2I06, pp. 77-81.
- M. Blaskiewicz, J. M. Brennan, and F. Severino, “Stochastic Cooling of High-Energy Bunched Beams”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEYC02, pp. 2014-2018.
- K. A. Brown, L. Ahrens, F. Severino, K. S. Smith, and M. Wilinski, “AGS Booster Beam Position, Tune, and Longitudinal Profile Data Acquisition System”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB012, pp. 2441-2443.
- T. Katayama et al., “Bunched Beam Stochastic Cooling at COSY”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD064, pp. 834-836.
- P. Schnizer, K. Aulenbacher, E. S. Fischer, A. Jankowiak, U. Ludwig-Mertin, and C. Montag, “Magnet Design of the ENC@FAIR Interaction Region”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB026, pp. 334-336.
- M. Marchetto et al., “The ISAC-II Linac Performance”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper WEM2I01, pp. 175-179.
- F. Zimmermann, M. Benedikt, and A.-S. Mueller, “The Future Circular Collider Study”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, pp. 6.
- H. Maesaka, “Full Energy Injection from the Sacla into the Spring-8 Storage Ring”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, paper FRXPLM02, pp. XX-XX.
- K. Zhao et al., “Research on Peking University Superconducting Accelerator Facility (PKU-SCAF)”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH312, pp. 2426-2428.
- L. X. Hu et al., “Collimator for Beam Position Measurement and Beam Collimation for Cyclotron”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 224-227.
- W. Zhang and Y. Zhu, “A Novel Attempt to Develop a Linear Polarization Adjustable Undulator Based on Magnetic Force Compensation Technology”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 140-142.
Back to search