Favourites
For Word
[n] H. Tomizawa, H. Dewa, H. Hanaki, A. Mizuno, and T. Taniuchi, “Review of Advanced Laser Technologies for Photocathode High-Brightness Guns”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper FR104, pp. 1105-1109.
[n] T. Saito, I. Miura, M. Uraki, Y. Kumata, Y. Touchi, and K. Uno, “The RF System for the RCNP Ring Cyclotron”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F2-02, pp. 201-204.
[n] P. V. Avrakhov, A. Kanareykin, S. Kazakov, N. Solyak, G. Wu, and V. P. Yakovlev, “Three-cell Traveling-wave Superconducting Test Structure”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP066, pp. 940-942.
[n] S. Suzuki, T. Asaka, Y. Hisaoka, T. Matsubara, T. Mitsui, and Y. Shoji, “Bunch Compression using the Transport Line and Short Bunch revolving in NewSUBARU”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THC3MA05, pp. 619-621.
[n] C.-Y. Hsieh, S.-H. Chen, and M. W. Lin, “Modeling of Self-Modulated Laser Wakefield Acceleration Driven by Sub-Terawatt Laser Pulses”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4690-4692. doi:10.18429/JACoW-IPAC2018-THPML018
[n] J. Bonthond, L. Ducimetiere, G. H. Schroder, J. Uythoven, G. Vossenberg, and Q. Han, “The Future of the SPS Injection Channel”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA63, pp. 1228-1230.
[n] D. Shu et al., “Mechanical Design of Compact Vertical and Horizontal Linear Nanopositioning Flexure Stages With Centimeter-Level Travel Range for X-Ray Beamline Instrumentation”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4096-4099. doi:10.18429/JACoW-IPAC2017-THPAB154
[n] K. H. Tanaka et al., “Primary and Secondary Beam Lines at the KEK 12 GeV Proton Synchrotron”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D072, pp. 576-578.
[n] F. X. Karl et al., “RHIC Survey and Alignment”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2919-2922.
[n] H. Ikeda, J. W. Flanagan, H. Fukuma, and T. M. Mitsuhashi, “Improved Measurement of Crabbing Angle by a Streak Camera at KEKB”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE008, pp. 969-971.
[n] L. M. Young, “Operations of the LEDA Resonantly Coupled RFQ”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WOAA004, pp. 309-313.
[n] J. Rodnizki et al., “SARAF Phase-I HWR Coupler Cooling Design”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THP066, pp. 1073-1076.
[n] R. Warange et al., “SKA Synchronization and Timing Local Monitor Control - Project Status”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1582-1586. doi:10.18429/JACoW-ICALEPCS2017-THPHA085
[n] W. Thur, J. Akre, A. Gavidia, and J. Guigli, “Mechanical Design of a Pinger System for the LBNL Light Source Accelerator”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5P045, pp. 2067-2068.
[n] S. Weisz, E. Barbero-Soto, K. Foraz, and F. Rodriguez-Mateos, “Planning and Logistics Issues Raised by the Individual System Tests during the Installation of the LHC”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH185, pp. 3233-3235.
[n] X. Wu et al., “Mass production of 3.9 GHz 9-cell cavities at SHINE”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2006-2009. doi:10.18429/JACoW-IPAC2024-WEPC21
[n] J. W. Engle, E. R. Birnbaum, M. E. Fassbender, K. D. John, and F. M. Nortier, “Parasitic Isotope Production with Cyclotron Beam Generated Neutrons”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TH2PB02, pp. 451-453.
[n] N. Akchurin et al., “Spin Dynamics Tests Preliminary to the Spin Splitter Experiment”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 959-961.
[n] M. E. Inman et al., “Development and Scale-Up of an HF Free Electropolishing Process in Single-Cell Niobium SRF Cavities”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper TUPO017, pp. 397-400.
[n] K. Honkavaara, “Operation of FLASH as an FEL User Facility”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper FR103, pp. 1100-1104.
[n] R. I. Saban et al., “The Commissioning of the LHC Technical Systems”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FROAC03, pp. 3801-3803.
[n] T. Kaneyasu, Y. Iwasaki, S. Koda, and Y. Takabayashi, “High-flux Gamma-ray Generation by Laser Compton Scattering in the SAGA-LS Storage Ring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPO014, pp. 1476-1478.
[n] V. S. Kashikhin et al., “Four-Coil Superconducting Helical Solenoid Model for Muon Beam Cooling”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPD013, pp. 2431-2433.
[n] Y. Kamiya et al., “Development of Shintake Beam Size Monitor for ATF2”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE022, pp. 1011-1013.
[n] Y. Shoji and K. Takeda, “Single Shot Bunch-by-Bunch Beam Emittance Measurement of the SPring-8 Linac”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPB038, pp. 261-263.
[n] W. Xu et al., “Multipacting in a Grooved Choke Joint at SRF Gun for BNL ERL Prototype”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP059, pp. 922-924.
[n] K. Shinto et al., “A Negative Ion Beam Probe for Diagnostics of a High Intensity Ion Beam”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE018, pp. 999-1001.
[n] S. Varnasseri and A. Nadji, “Status for Beam Diagnostics of SESAME”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE025, pp. 1020-1022.
[n] H. Sakamoto, “Status of the MICE Tracker System”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE017, pp. 996-998.
For LaTeX
Use Complete Form
For BibTeX
References
- H. Tomizawa, H. Dewa, H. Hanaki, A. Mizuno, and T. Taniuchi, “Review of Advanced Laser Technologies for Photocathode High-Brightness Guns”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper FR104, pp. 1105-1109.
- T. Saito, I. Miura, M. Uraki, Y. Kumata, Y. Touchi, and K. Uno, “The RF System for the RCNP Ring Cyclotron”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F2-02, pp. 201-204.
- P. V. Avrakhov, A. Kanareykin, S. Kazakov, N. Solyak, G. Wu, and V. P. Yakovlev, “Three-cell Traveling-wave Superconducting Test Structure”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP066, pp. 940-942.
- S. Suzuki, T. Asaka, Y. Hisaoka, T. Matsubara, T. Mitsui, and Y. Shoji, “Bunch Compression using the Transport Line and Short Bunch revolving in NewSUBARU”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THC3MA05, pp. 619-621.
- C.-Y. Hsieh, S.-H. Chen, and M. W. Lin, “Modeling of Self-Modulated Laser Wakefield Acceleration Driven by Sub-Terawatt Laser Pulses”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4690-4692.
- J. Bonthond, L. Ducimetiere, G. H. Schroder, J. Uythoven, G. Vossenberg, and Q. Han, “The Future of the SPS Injection Channel”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA63, pp. 1228-1230.
- D. Shu et al., “Mechanical Design of Compact Vertical and Horizontal Linear Nanopositioning Flexure Stages With Centimeter-Level Travel Range for X-Ray Beamline Instrumentation”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4096-4099.
- K. H. Tanaka et al., “Primary and Secondary Beam Lines at the KEK 12 GeV Proton Synchrotron”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D072, pp. 576-578.
- F. X. Karl et al., “RHIC Survey and Alignment”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2919-2922.
- H. Ikeda, J. W. Flanagan, H. Fukuma, and T. M. Mitsuhashi, “Improved Measurement of Crabbing Angle by a Streak Camera at KEKB”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE008, pp. 969-971.
- L. M. Young, “Operations of the LEDA Resonantly Coupled RFQ”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WOAA004, pp. 309-313.
- J. Rodnizki et al., “SARAF Phase-I HWR Coupler Cooling Design”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper THP066, pp. 1073-1076.
- R. Warange et al., “SKA Synchronization and Timing Local Monitor Control - Project Status”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1582-1586.
- W. Thur, J. Akre, A. Gavidia, and J. Guigli, “Mechanical Design of a Pinger System for the LBNL Light Source Accelerator”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5P045, pp. 2067-2068.
- S. Weisz, E. Barbero-Soto, K. Foraz, and F. Rodriguez-Mateos, “Planning and Logistics Issues Raised by the Individual System Tests during the Installation of the LHC”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH185, pp. 3233-3235.
- X. Wu et al., “Mass production of 3.9 GHz 9-cell cavities at SHINE”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPC21, pp. 2006-2009.
- J. W. Engle, E. R. Birnbaum, M. E. Fassbender, K. D. John, and F. M. Nortier, “Parasitic Isotope Production with Cyclotron Beam Generated Neutrons”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper TH2PB02, pp. 451-453.
- N. Akchurin et al., “Spin Dynamics Tests Preliminary to the Spin Splitter Experiment”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 959-961.
- M. E. Inman et al., “Development and Scale-Up of an HF Free Electropolishing Process in Single-Cell Niobium SRF Cavities”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper TUPO017, pp. 397-400.
- K. Honkavaara, “Operation of FLASH as an FEL User Facility”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper FR103, pp. 1100-1104.
- R. I. Saban et al., “The Commissioning of the LHC Technical Systems”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FROAC03, pp. 3801-3803.
- T. Kaneyasu, Y. Iwasaki, S. Koda, and Y. Takabayashi, “High-flux Gamma-ray Generation by Laser Compton Scattering in the SAGA-LS Storage Ring”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPO014, pp. 1476-1478.
- V. S. Kashikhin et al., “Four-Coil Superconducting Helical Solenoid Model for Muon Beam Cooling”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPD013, pp. 2431-2433.
- Y. Kamiya et al., “Development of Shintake Beam Size Monitor for ATF2”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE022, pp. 1011-1013.
- Y. Shoji and K. Takeda, “Single Shot Bunch-by-Bunch Beam Emittance Measurement of the SPring-8 Linac”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper MOPB038, pp. 261-263.
- W. Xu et al., “Multipacting in a Grooved Choke Joint at SRF Gun for BNL ERL Prototype”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP059, pp. 922-924.
- K. Shinto et al., “A Negative Ion Beam Probe for Diagnostics of a High Intensity Ion Beam”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE018, pp. 999-1001.
- S. Varnasseri and A. Nadji, “Status for Beam Diagnostics of SESAME”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE025, pp. 1020-1022.
- H. Sakamoto, “Status of the MICE Tracker System”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE017, pp. 996-998.
Back to search