Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. I. Meigo, A. Akutsu, K. Ikezaki, M. Nishikawa, M. Ooi, and S. F. Fukuta, “Beam Profile Monitor at the 1 MW Spallation Neutron Source”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 611-617. doi:10.18429/JACoW-IBIC2015-WEDLA03
[n] C. R. Scorzato, S. R. Marques, A. R. D. Rodrigues, and P. F. Tavares, “Upgrade of the LNLS Synchrotron Light Source Timing System”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH026, pp. 825-827.
[n] M. Berglund, E. Gianfelice, T. Sen, and F. Willeke, “Design of the HERA-e Lattice and Chromaticity Correction for the Luminosity Upgrade”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP35G, pp. 427-429.
[n] M. Muto et al., “Magnets and Power Supply System of JHF 50-GeV Main Ring”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D004, pp. 384-386.
[n] P. Kneisel, G. R. Myneni, G. Ciovati, J. Sekutowicz, and T. Carneiro, “Performance of Large Grain and Single Crystal Niobium Cavities”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper MOP09, pp. 134-142.
[n] Y. Suetsugu, A. Morishige, Co. Ltd, K. Shibata, Y. Suzuki, and M. Tsuchiya, “Beam Test of a Movable Collimator (Mask) with Low Beam Impedance”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPD038, pp. 1511-1513.
[n] A. Gallo et al., “Study of a C-band Harmonic RF System to Optimize the RF Bunch Compression Process of the SPARC Beam”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1552-1555. doi:10.18429/JACoW-IPAC2015-TUPWA058
[n] H. Sakaki et al., “Design of SPring-8 Linac Control System Using Object Oriented Concept”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPA07, pp. 2208-2210.
[n] T. Taniuchi, H. Hanaki, S. Suzuki, A. Miura, K. Shinohara, and S. Tsuruoka, “S-band Vacuum Isolator and Circulator for Injector System of SPring-8 Linac”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC015, pp. 95-97.
[n] J. R. Schneider, “Science at Single Pass X-Ray Free Electron Lasers”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper FRBAU01, pp. XX-XX.
[n] H. Zhang, A. Freyberger, G. A. Krafft, Y. Roblin, and B. Terzic, “Optimization of the RF Cavity Heat Load and Trip Rates for CEBAF at 12 GeV”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1170-1173. doi:10.18429/JACoW-IPAC2017-MOPVA133
[n] H. Takei, “Conceptual Design of Beam Dump for High Power Electron Beam”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TUP25, pp. 387-389.
[n] Y. Wang et al., “Status of PNC High Power CW Electron Linac”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4E201, pp. 289-291.
[n] M. Tawada, M. Kikuchi, T. Mimashi, S. Nagahashi, and A. Ueda, “Development of Pulsed Bending Magnet for Simultaneous Top-Up Injection to KEKB and PF Ring”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP019, pp. 175-177.
[n] A. Toyoda et al., “Development of Radiation Registant Optics System for High Intensity Proton Beamline at the J-PARC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE024, pp. 1017-1019.
For LaTeX
Use Complete Form
For BibTeX
References
- S. I. Meigo, A. Akutsu, K. Ikezaki, M. Nishikawa, M. Ooi, and S. F. Fukuta, “Beam Profile Monitor at the 1 MW Spallation Neutron Source”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 611-617.
- C. R. Scorzato, S. R. Marques, A. R. D. Rodrigues, and P. F. Tavares, “Upgrade of the LNLS Synchrotron Light Source Timing System”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH026, pp. 825-827.
- M. Berglund, E. Gianfelice, T. Sen, and F. Willeke, “Design of the HERA-e Lattice and Chromaticity Correction for the Luminosity Upgrade”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP35G, pp. 427-429.
- M. Muto et al., “Magnets and Power Supply System of JHF 50-GeV Main Ring”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D004, pp. 384-386.
- P. Kneisel, G. R. Myneni, G. Ciovati, J. Sekutowicz, and T. Carneiro, “Performance of Large Grain and Single Crystal Niobium Cavities”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper MOP09, pp. 134-142.
- Y. Suetsugu, A. Morishige, Co. Ltd, K. Shibata, Y. Suzuki, and M. Tsuchiya, “Beam Test of a Movable Collimator (Mask) with Low Beam Impedance”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPD038, pp. 1511-1513.
- A. Gallo et al., “Study of a C-band Harmonic RF System to Optimize the RF Bunch Compression Process of the SPARC Beam”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1552-1555.
- H. Sakaki et al., “Design of SPring-8 Linac Control System Using Object Oriented Concept”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPA07, pp. 2208-2210.
- T. Taniuchi, H. Hanaki, S. Suzuki, A. Miura, K. Shinohara, and S. Tsuruoka, “S-band Vacuum Isolator and Circulator for Injector System of SPring-8 Linac”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC015, pp. 95-97.
- J. R. Schneider, “Science at Single Pass X-Ray Free Electron Lasers”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper FRBAU01, pp. XX-XX.
- H. Zhang, A. Freyberger, G. A. Krafft, Y. Roblin, and B. Terzic, “Optimization of the RF Cavity Heat Load and Trip Rates for CEBAF at 12 GeV”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1170-1173.
- H. Takei, “Conceptual Design of Beam Dump for High Power Electron Beam”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper TUP25, pp. 387-389.
- Y. Wang et al., “Status of PNC High Power CW Electron Linac”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4E201, pp. 289-291.
- M. Tawada, M. Kikuchi, T. Mimashi, S. Nagahashi, and A. Ueda, “Development of Pulsed Bending Magnet for Simultaneous Top-Up Injection to KEKB and PF Ring”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP019, pp. 175-177.
- A. Toyoda et al., “Development of Radiation Registant Optics System for High Intensity Proton Beamline at the J-PARC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE024, pp. 1017-1019.
Back to search