Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. A. Gough et al., “Design of an RFQ-Based, H- Injector for the BNL/FNAL 200 MeV Proton Linacs”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper WE3-8, pp. 260-262.
[n] T. Chen and S. Peggs, “The Driven Pendulum, and E778 Tune Modulation”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1343-1346.
[n] Y. H. Wu and J. Ellsworth, “Summary of Beam Operation Capability at FXR LIA”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3316-3319. doi:10.18429/JACoW-IPAC2018-THPAK045
[n] Yu. V. Bylinsky, S. V. Dvortsov, A. V. Feschenko, S. J. Jarylkapov, and P. N. Ostroumov, “Setting of RF Phase and Amplitude in Multi-Tank Ion Linac”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-69, pp. 805-807.
[n] M. L. Gibbs, W. S. Colocho, A. Osman, J. Shtalenkova, and H. H. Slepicka, “A PyDM User Interface for an LCLS Simulator”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1532. doi:10.18429/JACoW-ICALEPCS2019-WESH4002
[n] D. Xie, J. Y. Benitez, C. M. Lyneis, D. S. Todd, and W. Lu, “Recent production of intense high charge ion beams with VENUS”, in Proc. ECRIS'16, Busan, Korea, Aug.-Sep. 2016, pp. 141-145. doi:10.18429/JACoW-ECRIS2016-THAO01
[n] V. Baldini et al., “The Instrument Control Electronics of the ESPRESSO Spectrograph @VLT”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 689-692. doi:10.18429/JACoW-ICALEPCS2015-WEPGF001
[n] I. Barnett, G. Fernqvist, D. Hundzinger, J-C. Perreard, and J. G. Pett, “A Strategy for Controlling the LHC Magnet Currents”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP020G, pp. 2317-2319.
[n] B. Schmitz, J. Knobloch, O. Kugeler, J. M. K?â, and Y. Tamashevich, “Setup of a Spatially Resolving Vector Magnetometry System for the Investigation of Flux Trapping in Superconducting Cavities”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 975-977. doi:10.18429/JACoW-IPAC2017-MOPVA050
[n] N. Barov et al., “Measurements of Plasma Wake-Fields in the Blow-Out Regime”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAG06, pp. 631-633.
[n] R. J. Macek, E. W. Hoffman, and O. B. van Dyck, “LAMPF Primary Beam Line Protection Systems”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 4137-4140.
[n] M. Kinsho, Z. Kabeya, N. Ogiwara, and Y. Saito, “Alumina Ceramics Vacuum Duct for the 3GeV-RCS of the J-PARC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPE039, pp. 2604-2606.
[n] M. E. Gruchalla and M. Thuot, “Managing Electromagnetic Interference in Large Instrumentation Environments”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper TUTUB1, pp. 224-238.
[n] J. G. Power et al., “High Power Testing of X-Band Dielectric-Loaded Accelerating Structures”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROAA010, pp. 492-494.
[n] V. P. Suller, J. S. MacKay, M. W. Poole, and R. P. Walker, “Limitations on Single Bunch Operation in the SRS due to Beam Instabilities”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 497-500.
[n] R. Soliday, “Proliferation of SDDS Support for Various Platforms and Languages”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP031, pp. XX-XX.
[n] M. Plotkin, “A Proposed AGS Accelerating Cavity”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 148-153.
[n] C. McGuinness, “Woodpile Structure Fabrication for Photonic Crystal Laser Acceleration”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP090, pp. 3008-3008.
[n] O. A. Nezhevenko et al., “Performance of X-Band Pulsed Magnicon Amplifier”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAE022, pp. 1128-1130.
[n] K. Kennedy, T. Henderson, and J. Meneghetti, “Vauum System for the LBL Advanced Light Source (ALS)”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 560-563.
[n] M. Br?ñger, M. Brightwell, E. Koufakis, R. Martini, and A. Suwalska, “High-Availability Monitoring and Big Data: Using Java Clustering and Caching Technologies to Meet Complex Monitoring Scenarios”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC140, pp. 439-442.
[n] J.-B. Bergot et al., “A Modular Design for the 56 Variants of the Short Straight Section in the Arcs of the Large Hadron Collider LHC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2A05, pp. 2157-2159.
[n] G. Carron et al., “Observation of Transverse Quadrupole Mode Instabilities in Intense Cooled Antiproton Beams in the AA”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 803-806.
[n] A. Taghibi Khotbeh-Sara, F. Rahmani, F. Ghasemi, H. Khalafi, and M. Mohseni Kejani, “Nuclear and Mechanical Basic Design of Target for Mo-99 Production Using High Power Electron Linac”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 148-150. doi:10.18429/JACoW-LINAC2018-MOPO069
[n] M. Steck et al., “The Electron Cooling Device for the Heavy Ion Storage Ring TSR”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1172-1175.
[n] J. Fernandez Cortes, E. Blanco Vinuela, and L. A. Gonzalez, “Industrial Stepping Motors Integration in the UNICOS-CPC Framework”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1720-1724. doi:10.18429/JACoW-ICALEPCS2017-THPHA144
[n] F. Belloni, D. Doria, A. Lorusso, and V. Nassisi, “Ion Implantation Via Laser Ion Source”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH181, pp. 2355-2357.
[n] T. Kachel et al., “First Experiments with Femtosecond Soft X-Ray Pulses at BESSY”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper TUPPH063, pp. XX-XX.
[n] T. C. Shen et al., “The Evolution of the Simulation Environment in ALMA”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 765-768. doi:10.18429/JACoW-ICALEPCS2015-WEPGF031
[n] H. Zhang, C. Britton, G. Cubbon, C. Finlay, E. Matias, and R. Tanner, “CLS LINAC Safety System Upgrade”, in Proc. PCaPAC'10, Saskatoon, Canada, Oct. 2010, paper THPL010, pp. 144-146.
[n] R. Schuhmann, W. F. O. Müller, and T. Weiland, “Calculating Trapped Modes in TESLA Cavities with Time and Frequency Domain Methods”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TOPB006, pp. 273-275.
[n] A. Y. Murokh et al., “Design and Fabrication of an X-band Traveling Wave Deflection Mode Cavity for Longitudinal Characterization of Ultra-short Electron Beam Pulses”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC072, pp. 1215-1217.
[n] A. J. T. Ramaila et al., “Control System Simulation Using DSEE High Level Instrument Interface and Behavioural Description”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 292-297. doi:10.18429/JACoW-ICALEPCS2017-TUDPL03
[n] A. V. Feschenko, A. A. Men, and P. N. Ostroumov, “A Detector to Measure Longitudinal and Transverse Distributions of a Two Component Ion Beam”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1073-1076.
[n] G. Geschonke, “Results from the CLIC Test Facility CTF3 and Update on the CLIC Design”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THYG02, pp. 2912-2916.
[n] N. Zhang, F. Z. Chen, and Y. M. Zhou, “Filling Pattern Measurement System Upgrade in SSRF”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4791-4793. doi:10.18429/JACoW-IPAC2018-THPML066
[n] A. H. Lumpkin, W. J. Berg, M. Borland, and J. W. Lewellen, “Recent Characterizations of Electron Beams from the APS Linac”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB004, pp. 2417-2419.
[n] Ch. Geyer and D. Kraemer, “Injection and Extraction of the BESSY II Booster and Storage Ring”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2349-2352.
[n] G. Lee, “Radiation Resistance of Elastomers”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3806-3809.
[n] Y.-C. Huang, F. H. Chao, C. H. Chen, H. H. Chen, and K. Y. Huang, “Tunable THz-pulse-train Photoinjector”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper TUPA01, pp. 187-189.
[n] F. S. Rafael, J. Apfelbaum, A. C. Lira, and J. A. Pomilio, “A High Voltage Resonant Converter for Pulsed Magnets”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1429-1432.
[n] N. Solyak, V. Ivanov, C. S. Mishra, and K. Ranjan, “Study of Adaptive Alignment as Beam Based Alignment in ILC Main Linac in the Presence of Ground Motion”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN108, pp. 2963-2965.
[n] M. Plotkin, “Folded Ferrite Loaded Cavities for Impedance Matching in the AGS”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 312-315.
[n] Y. P. Song, Y. Bao, Y. K. Chen, H. T. Jing, C. Meng, and J. Y. Tang, “Decay Muon Beamline Design for EMuS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3670-3672. doi:10.18429/JACoW-IPAC2019-THPGW040
[n] D. R. Swenson et al., “Development of a Volume H- Ion Source for LAMPF”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPC10, pp. 1016-1018.
[n] F. Ehm and A. Dworak, “A Remote Tracing Facility for Distributed Systems”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEMAU001, pp. 650-653.
[n] Yu. V. Bylinsky, A. V. Feschenko, A. V. Liiou, A. A. Men, and P. N. Ostroumov, “Bunch Length and Velocity Detector and its Application in the CERN Heavy Ion Linac”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1702-1705.
[n] S. B. Leith, X. Jiang, R. Ries, E. Seiler, and M. Vogel, “Deposition Parameter Effects on Niobium Nitride (NbN) Thin Films Deposited Onto Copper Substrates with DC Magnetron Sputtering”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 945-949. doi:10.18429/JACoW-SRF2019-THP043
[n] W. F. Bergan et al., “Using High?¡ Precision Beam Position Monitors at the Cornell Electron Storage Ring (CESR) to Measure the One?¡ Way Speed of Light Anisotropy”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 399-401. doi:10.18429/JACoW-NAPAC2016-TUPOA57
[n] J. D. Gilpatrick, D. Barr, D. Martinez, J. F. O, R. B. Shurter, and M. Stettler, “Beam Position Measurements at Los Alamos: Isotope Production Facility and Switchyard Kicker Upgrade”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB046, pp. 2512-2514.
[n] J. Cereijo Garc?â, T. Korhonen, and J. H. Lee, “Timing System at ESS”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 618-621. doi:10.18429/JACoW-ICALEPCS2017-TUPHA088
[n] T. F. Wang and R. K. Cooper, “Electron Trajectories in a Combined Wiggler and Alternating Gradient Quadrupole Field”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2599-2602.
[n] S. R. Gysin, C. L. Schumann, and A. D. Petrov, “User Authentication for Role-Based Access Control”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPA12, pp. 111-113.
[n] W. D. Klotz and C. Herve, “The Conceptual Design of the ESRF Control System”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1196-1199.
[n] T. Kroyer, P. Borowiec, F. Caspers, Z. Sulek, and L. R. Williams, “Operational Experience with the LHC Waveguide Mode Reflectometer”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS141, pp. 2709-2711.
[n] W. Leemans et al., “Status of the LBL Experiment on Femtosecond X-ray Generation through 90[degree] Thompson Scattering”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 828-831.
[n] M. Gusarova et al., “Low Betta Superconducting Cavity for the New Injector Linac for Nuclotron-NICA”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1058-1060. doi:10.18429/JACoW-IPAC2017-MOPVA087
[n] R. E. Laxdal, “An Overview of Recent Developments in SRF Technology”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 6-12. doi:10.18429/JACoW-LINAC2018-MO1A02
[n] J. Lewis, J. C. Bau, J. Serrano, D. Dom?¡nguez, and P. A. Sanchez, “The Evolution of the CERN SPS Timing System for the LHC Era”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP535, pp. XX-XX.
[n] E. D. Courant, “Injection into the BNL AGS”, in Proc. LINAC'63, New Heaven, CT, USA, Oct. 1963, paper 9-02, pp. 301-310.
[n] G. Chiozzi et al., “The ALMA Common Software (ACS): Status and Developments”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper MP703, pp. XX-XX.
[n] Y. Hashimoto et al., “Two-Dimensional and Wide Dynamic Range Profile Monitor Using OTR / Fluorescence Screens for Diagnosing Beam Halo of Intense Proton Beams”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper TUO2AB04, pp. 187-191.
[n] B. M. Dunham, L. S. Cardman, and C. K. Sinclair, “Emittance Measurements for the Illinois/CEBAF Polarized Electron Source”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPC17, pp. 1030-1032.
[n] B. Bauvir, G. Chiozzi, and P. R. M. Duhoux, “Integration of ALMA Common Software and National Instruments LabVIEW”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper WEP013, pp. 195-197.
[n] R. Valizadeh et al., “MULTIPACTOR SUPPRESSION BY LASER ABLATION SURFACE ENGINEERING FOR SPACE APPLICATIONS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1365-1368. doi:10.18429/JACoW-IPAC2019-TUPMP051
[n] T. C. Shen et al., “Exploring No-SQL Alternatives for ALMA Monitoring System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper WECOBA06, pp. 1012-1015.
[n] J. A. Avarias, G. Chiozzi, and H. Sommer, “Data Distribution Service as an Alternative to CORBA Notify Service of the ALMA Common Software”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEA006, pp. 373-375.
[n] P. Buaphad et al., “X-ray Dose Rate of 6/4 MeV European S-band Linac Structure for Industrial Application at RTX”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3494-3496. doi:10.18429/JACoW-IPAC2019-THPMP021
[n] X. Xie, L. Liu, and T. Zhang, “Cyclotron Magnetic Field Computation Based on Data of an Asymmetric Reference Plane”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I1-08, pp. 309-311.
[n] S. Avsec, B. Jeram, G. Mavric, M. Plesko, and J. Stefan, “The Design of the Control System for ANKA”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3P053, pp. 2481-2483.
[n] M. Schenk et al., “Practical Stabilisation of Transverse Collective Instabilities with Second Order Chromaticity in the LHC”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4477-4480. doi:10.18429/JACoW-IPAC2017-THPVA026
[n] V. Baldini et al., “A PLC-Based System for the Control of an Educational Observatory”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC054, pp. 691-694.
[n] A. Bungau, R. Cywinski, and J. S. Lord, “GEANT4 Simulations of the ISIS Muon Target at Rutherford Appleton Laboratory”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP052, pp. 1400-1402.
[n] H. H. Slepicka and M. L. Gibbs, “PyDM - Status Update”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 537. doi:10.18429/JACoW-ICALEPCS2019-MOPHA134
[n] C. W. Owen, E. R. Gray, D. E. Johnson, G. M. Lee, S. Ohnuma, and R. A. Winje, “A 200-MHz Debuncher for the Fermilab Injector”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1904-1906.
[n] R. H. A. Farias, N. P. Abreu, L. C. Jahnel, L. Liu, C. Pardine, and P. F. Tavares, “Upgrade and Commissioning of the LNLS RF System”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPKF001, pp. 950-952.
[n] J. C. Brutus et al., “Mechanical Design of the 704 MHz 5-cell SRF Cavity Cold Mass for CeC PoP Experiment”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPAC06, pp. 799-801.
[n] C. M. Yim, H.-S. Kang, C. Kim, I. S. Ko, and S. Noh, “Beam Parameter Measurements of fs-THz Linac at PAL”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE039, pp. 1059-1061.
[n] Ch. Gerth et al., “Start-To-End Simulations of the Energy Recovery Linac Prototype FEL”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper THPOS47, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- R. A. Gough et al., “Design of an RFQ-Based, H- Injector for the BNL/FNAL 200 MeV Proton Linacs”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper WE3-8, pp. 260-262.
- T. Chen and S. Peggs, “The Driven Pendulum, and E778 Tune Modulation”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1343-1346.
- Y. H. Wu and J. Ellsworth, “Summary of Beam Operation Capability at FXR LIA”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3316-3319.
- Yu. V. Bylinsky, S. V. Dvortsov, A. V. Feschenko, S. J. Jarylkapov, and P. N. Ostroumov, “Setting of RF Phase and Amplitude in Multi-Tank Ion Linac”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-69, pp. 805-807.
- M. L. Gibbs, W. S. Colocho, A. Osman, J. Shtalenkova, and H. H. Slepicka, “A PyDM User Interface for an LCLS Simulator”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1532.
- D. Xie, J. Y. Benitez, C. M. Lyneis, D. S. Todd, and W. Lu, “Recent production of intense high charge ion beams with VENUS”, in Proc. 22nd Int. Workshop on ECR Ion Sources (ECRIS'16), Busan, Korea, Aug.-Sep. 2016, pp. 141-145.
- V. Baldini et al., “The Instrument Control Electronics of the ESPRESSO Spectrograph @VLT”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 689-692.
- I. Barnett, G. Fernqvist, D. Hundzinger, J-C. Perreard, and J. G. Pett, “A Strategy for Controlling the LHC Magnet Currents”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP020G, pp. 2317-2319.
- B. Schmitz, J. Knobloch, O. Kugeler, J. M. K?â, and Y. Tamashevich, “Setup of a Spatially Resolving Vector Magnetometry System for the Investigation of Flux Trapping in Superconducting Cavities”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 975-977.
- N. Barov et al., “Measurements of Plasma Wake-Fields in the Blow-Out Regime”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAG06, pp. 631-633.
- R. J. Macek, E. W. Hoffman, and O. B. van Dyck, “LAMPF Primary Beam Line Protection Systems”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 4137-4140.
- M. Kinsho, Z. Kabeya, N. Ogiwara, and Y. Saito, “Alumina Ceramics Vacuum Duct for the 3GeV-RCS of the J-PARC”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPE039, pp. 2604-2606.
- M. E. Gruchalla and M. Thuot, “Managing Electromagnetic Interference in Large Instrumentation Environments”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper TUTUB1, pp. 224-238.
- J. G. Power et al., “High Power Testing of X-Band Dielectric-Loaded Accelerating Structures”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROAA010, pp. 492-494.
- V. P. Suller, J. S. MacKay, M. W. Poole, and R. P. Walker, “Limitations on Single Bunch Operation in the SRS due to Beam Instabilities”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 497-500.
- R. Soliday, “Proliferation of SDDS Support for Various Platforms and Languages”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THAP031, pp. XX-XX.
- M. Plotkin, “A Proposed AGS Accelerating Cavity”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 148-153.
- C. McGuinness, “Woodpile Structure Fabrication for Photonic Crystal Laser Acceleration”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP090, pp. 3008-3008.
- O. A. Nezhevenko et al., “Performance of X-Band Pulsed Magnicon Amplifier”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAE022, pp. 1128-1130.
- K. Kennedy, T. Henderson, and J. Meneghetti, “Vauum System for the LBL Advanced Light Source (ALS)”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 560-563.
- M. Br?ñger, M. Brightwell, E. Koufakis, R. Martini, and A. Suwalska, “High-Availability Monitoring and Big Data: Using Java Clustering and Caching Technologies to Meet Complex Monitoring Scenarios”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC140, pp. 439-442.
- J.-B. Bergot et al., “A Modular Design for the 56 Variants of the Short Straight Section in the Arcs of the Large Hadron Collider LHC”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP2A05, pp. 2157-2159.
- G. Carron et al., “Observation of Transverse Quadrupole Mode Instabilities in Intense Cooled Antiproton Beams in the AA”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 803-806.
- A. Taghibi Khotbeh-Sara, F. Rahmani, F. Ghasemi, H. Khalafi, and M. Mohseni Kejani, “Nuclear and Mechanical Basic Design of Target for Mo-99 Production Using High Power Electron Linac”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 148-150.
- M. Steck et al., “The Electron Cooling Device for the Heavy Ion Storage Ring TSR”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1172-1175.
- J. Fernandez Cortes, E. Blanco Vinuela, and L. A. Gonzalez, “Industrial Stepping Motors Integration in the UNICOS-CPC Framework”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1720-1724.
- F. Belloni, D. Doria, A. Lorusso, and V. Nassisi, “Ion Implantation Via Laser Ion Source”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH181, pp. 2355-2357.
- T. Kachel et al., “First Experiments with Femtosecond Soft X-Ray Pulses at BESSY”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper TUPPH063, pp. XX-XX.
- T. C. Shen et al., “The Evolution of the Simulation Environment in ALMA”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 765-768.
- H. Zhang, C. Britton, G. Cubbon, C. Finlay, E. Matias, and R. Tanner, “CLS LINAC Safety System Upgrade”, in Proc. 8th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'10), Saskatoon, Canada, Oct. 2010, paper THPL010, pp. 144-146.
- R. Schuhmann, W. F. O. Müller, and T. Weiland, “Calculating Trapped Modes in TESLA Cavities with Time and Frequency Domain Methods”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TOPB006, pp. 273-275.
- A. Y. Murokh et al., “Design and Fabrication of an X-band Traveling Wave Deflection Mode Cavity for Longitudinal Characterization of Ultra-short Electron Beam Pulses”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC072, pp. 1215-1217.
- A. J. T. Ramaila et al., “Control System Simulation Using DSEE High Level Instrument Interface and Behavioural Description”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 292-297.
- A. V. Feschenko, A. A. Men, and P. N. Ostroumov, “A Detector to Measure Longitudinal and Transverse Distributions of a Two Component Ion Beam”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1073-1076.
- G. Geschonke, “Results from the CLIC Test Facility CTF3 and Update on the CLIC Design”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THYG02, pp. 2912-2916.
- N. Zhang, F. Z. Chen, and Y. M. Zhou, “Filling Pattern Measurement System Upgrade in SSRF”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4791-4793.
- A. H. Lumpkin, W. J. Berg, M. Borland, and J. W. Lewellen, “Recent Characterizations of Electron Beams from the APS Linac”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB004, pp. 2417-2419.
- Ch. Geyer and D. Kraemer, “Injection and Extraction of the BESSY II Booster and Storage Ring”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2349-2352.
- G. Lee, “Radiation Resistance of Elastomers”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3806-3809.
- Y.-C. Huang, F. H. Chao, C. H. Chen, H. H. Chen, and K. Y. Huang, “Tunable THz-pulse-train Photoinjector”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper TUPA01, pp. 187-189.
- F. S. Rafael, J. Apfelbaum, A. C. Lira, and J. A. Pomilio, “A High Voltage Resonant Converter for Pulsed Magnets”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1429-1432.
- N. Solyak, V. Ivanov, C. S. Mishra, and K. Ranjan, “Study of Adaptive Alignment as Beam Based Alignment in ILC Main Linac in the Presence of Ground Motion”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN108, pp. 2963-2965.
- M. Plotkin, “Folded Ferrite Loaded Cavities for Impedance Matching in the AGS”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 312-315.
- Y. P. Song, Y. Bao, Y. K. Chen, H. T. Jing, C. Meng, and J. Y. Tang, “Decay Muon Beamline Design for EMuS”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3670-3672.
- D. R. Swenson et al., “Development of a Volume H- Ion Source for LAMPF”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPC10, pp. 1016-1018.
- F. Ehm and A. Dworak, “A Remote Tracing Facility for Distributed Systems”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEMAU001, pp. 650-653.
- Yu. V. Bylinsky, A. V. Feschenko, A. V. Liiou, A. A. Men, and P. N. Ostroumov, “Bunch Length and Velocity Detector and its Application in the CERN Heavy Ion Linac”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1702-1705.
- S. B. Leith, X. Jiang, R. Ries, E. Seiler, and M. Vogel, “Deposition Parameter Effects on Niobium Nitride (NbN) Thin Films Deposited Onto Copper Substrates with DC Magnetron Sputtering”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 945-949.
- W. F. Bergan et al., “Using High?¡ Precision Beam Position Monitors at the Cornell Electron Storage Ring (CESR) to Measure the One?¡ Way Speed of Light Anisotropy”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 399-401.
- J. D. Gilpatrick, D. Barr, D. Martinez, J. F. O, R. B. Shurter, and M. Stettler, “Beam Position Measurements at Los Alamos: Isotope Production Facility and Switchyard Kicker Upgrade”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB046, pp. 2512-2514.
- J. Cereijo Garc?â, T. Korhonen, and J. H. Lee, “Timing System at ESS”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 618-621.
- T. F. Wang and R. K. Cooper, “Electron Trajectories in a Combined Wiggler and Alternating Gradient Quadrupole Field”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2599-2602.
- S. R. Gysin, C. L. Schumann, and A. D. Petrov, “User Authentication for Role-Based Access Control”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TPPA12, pp. 111-113.
- W. D. Klotz and C. Herve, “The Conceptual Design of the ESRF Control System”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1196-1199.
- T. Kroyer, P. Borowiec, F. Caspers, Z. Sulek, and L. R. Williams, “Operational Experience with the LHC Waveguide Mode Reflectometer”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS141, pp. 2709-2711.
- W. Leemans et al., “Status of the LBL Experiment on Femtosecond X-ray Generation through 90[degree] Thompson Scattering”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 828-831.
- M. Gusarova et al., “Low Betta Superconducting Cavity for the New Injector Linac for Nuclotron-NICA”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1058-1060.
- R. E. Laxdal, “An Overview of Recent Developments in SRF Technology”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 6-12.
- J. Lewis, J. C. Bau, J. Serrano, D. Dom?¡nguez, and P. A. Sanchez, “The Evolution of the CERN SPS Timing System for the LHC Era”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP535, pp. XX-XX.
- E. D. Courant, “Injection into the BNL AGS”, in Proc. 1963 Conf. on Proton Linear Accelerators (LINAC'63), New Heaven, CT, USA, Oct. 1963, paper 9-02, pp. 301-310.
- G. Chiozzi et al., “The ALMA Common Software (ACS): Status and Developments”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper MP703, pp. XX-XX.
- Y. Hashimoto et al., “Two-Dimensional and Wide Dynamic Range Profile Monitor Using OTR / Fluorescence Screens for Diagnosing Beam Halo of Intense Proton Beams”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper TUO2AB04, pp. 187-191.
- B. M. Dunham, L. S. Cardman, and C. K. Sinclair, “Emittance Measurements for the Illinois/CEBAF Polarized Electron Source”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPC17, pp. 1030-1032.
- B. Bauvir, G. Chiozzi, and P. R. M. Duhoux, “Integration of ALMA Common Software and National Instruments LabVIEW”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper WEP013, pp. 195-197.
- R. Valizadeh et al., “MULTIPACTOR SUPPRESSION BY LASER ABLATION SURFACE ENGINEERING FOR SPACE APPLICATIONS”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1365-1368.
- T. C. Shen et al., “Exploring No-SQL Alternatives for ALMA Monitoring System”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper WECOBA06, pp. 1012-1015.
- J. A. Avarias, G. Chiozzi, and H. Sommer, “Data Distribution Service as an Alternative to CORBA Notify Service of the ALMA Common Software”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEA006, pp. 373-375.
- P. Buaphad et al., “X-ray Dose Rate of 6/4 MeV European S-band Linac Structure for Industrial Application at RTX”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3494-3496.
- X. Xie, L. Liu, and T. Zhang, “Cyclotron Magnetic Field Computation Based on Data of an Asymmetric Reference Plane”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I1-08, pp. 309-311.
- S. Avsec, B. Jeram, G. Mavric, M. Plesko, and J. Stefan, “The Design of the Control System for ANKA”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3P053, pp. 2481-2483.
- M. Schenk et al., “Practical Stabilisation of Transverse Collective Instabilities with Second Order Chromaticity in the LHC”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4477-4480.
- V. Baldini et al., “A PLC-Based System for the Control of an Educational Observatory”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC054, pp. 691-694.
- A. Bungau, R. Cywinski, and J. S. Lord, “GEANT4 Simulations of the ISIS Muon Target at Rutherford Appleton Laboratory”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6PFP052, pp. 1400-1402.
- H. H. Slepicka and M. L. Gibbs, “PyDM - Status Update”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 537.
- C. W. Owen, E. R. Gray, D. E. Johnson, G. M. Lee, S. Ohnuma, and R. A. Winje, “A 200-MHz Debuncher for the Fermilab Injector”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1904-1906.
- R. H. A. Farias, N. P. Abreu, L. C. Jahnel, L. Liu, C. Pardine, and P. F. Tavares, “Upgrade and Commissioning of the LNLS RF System”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPKF001, pp. 950-952.
- J. C. Brutus et al., “Mechanical Design of the 704 MHz 5-cell SRF Cavity Cold Mass for CeC PoP Experiment”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPAC06, pp. 799-801.
- C. M. Yim, H.-S. Kang, C. Kim, I. S. Ko, and S. Noh, “Beam Parameter Measurements of fs-THz Linac at PAL”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE039, pp. 1059-1061.
- Ch. Gerth et al., “Start-To-End Simulations of the Energy Recovery Linac Prototype FEL”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper THPOS47, pp. XX-XX.
Back to search