Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] W. Lou, C. Mayes, and Y. Cai, “Two Dimensional Transient CSR Simulation in Julia”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPA001, unpublished.
[n] J. Harzheim, D. Domont-Yankulova, K. Gross, H. Klingbeil, and M. Frey, “Input Signal Generation for Barrier Bucket RF Systems at GSI”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3359-3362. doi:10.18429/JACoW-IPAC2017-WEPVA047
[n] G. Eremeev et al., “First results from two Nb3Sn cavities assembled in a CEBAF quarter cryomodule”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper THPB020, unpublished.
[n] C. Liu et al., “Crossing angle implementation for luminosity maximization in a narrow vertex region in RHIC operation”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 36-39. doi:10.18429/JACoW-IPAC2024-MOPC03
[n] J. Kamiya et al., “Measurement of the Extraction Kicker System in J-PARC RCS”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS110, pp. 1759-1761.
[n] A. Lunin, G. Romanov, N. Solyak, and M. Wendt, “Design of a Submicron Resolution Cavity BPM for the ILC Main Linac”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPC23, pp. 192-194.
[n] A. N. Didenko, “About One Possible Explanation of Influence of Microwave Magnetic Field on Quality Factor of Superconducting Accelerating System”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP073L, pp. 2130-2131.
[n] P. Wang, D. Z. Cao, H. B. Chen, J. Shi, Z. H. Wang, and H. Zha, “Fabrication and Cold Test of the Correction Cavity Chain for Klystron-Based CLIC”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4014-4016. doi:10.18429/JACoW-IPAC2018-THPAL155
[n] S. I. Meigo, A. Akutsu, K. I. Ikezaki, M. Ooi, and H. Fujimori, “Beam Flattening System based on Non-linear Optics for High Power Spallation Neutron Target at J-PARC”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 896-898. doi:10.18429/JACoW-IPAC2014-MOPRI116
[n] J. R. Cary, S. G. Shasharina, and W. Wan, “Mapa - An Object Oriented Code with a Graphical User Interface for Accelerator Design and Analysis”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP134G, pp. 1301-1302.
[n] J. Crittenden, G. Hoffstaetter, M. Liepe, C. Mayes, and D. Sagan, “BBU Calculations for ERLs”, in Proc. ERL'09, Ithaca, NY, USA, Jun. 2009, paper JS203, pp. 82-84.
[n] L. Jensen, O. R. Jones, and H. Schmickler Geneva, “First results on closed-loop tune control in the CERN-SPS”, in Proc. DIPAC'99, Chester, UK, May 1999, paper PT05, pp. XX-XX.
[n] C. Z. Antoine and D. Cochet, “Hydroforming of Niobium RF Cavities: Mechanical Properties of Nb in Relation to its Forming Ability”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95F09, pp. 581-585.
[n] K. A. Brown et al., “Performance and Capabilities of the NASA Space Radiation Laboratory at BNL”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH099, pp. 270-272.
[n] D. L. Bruhwiler, J. R. Cary, and S. G. Shasharina, “Object Oriented C++ Software Components for Accelerator Design”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEDL6, pp. 369-371.
[n] H. L. Hagedoorn and W. M. Schulte, “Accelerated Particles in an AVF Cyclotron with a One or a Two Dee System”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper F-06, pp. 2329-2333.
[n] A. M. Semenov et al., “The Thermal Outgassing Rate of Materials Used in Vacuum Systems”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2447-2449. doi:10.18429/JACoW-IPAC2021-TUPAB396
[n] H. S. Kim, Y.-S. Cho, J. J. Dang, H. S. Jeong, H.-J. Kwon, and S. Lee, “Design Study on the Superconducting HWR for Secondary Particle Generation at KOMAC”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 499-501. doi:10.18429/JACoW-SRF2017-TUPB049
[n] P. M. Ivanov, Y. Alexahin, J. Annala, V. Lebedev, and V. D. Shiltsev, “Landau Damping of the Weak Head-Tail Instability at Tevatron”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPP042, pp. 2714-2716.
[n] C. J. A. Corsten and H. L. Hagedoorn, “Uncoupled and Coupled Orbit Motion in a Storage Ring”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2624-2627.
[n] I. Stevani, N. Milas, X. R. Resende, and L. N. P. Vilela, “High Level Applications for Sirius”, in Proc. PCaPAC'16, Campinas, Brazil, Oct. 2016, pp. 47-49. doi:10.18429/JACoW-PCAPAC2016-WEPOPRPO22
[n] J. I. M. Botman, H. L. Hagedoorn, and R. F. Kruis, “Extraction Efficiency Optimization for the Eindhoven AVF Cyclotron”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper EP-30, pp. 489-491.
[n] S. G. Shasharina, D. Alexander, J. R. Cary, M. A. Durant, S. E. Kruger, and S. A. Veitzer, “VizSchema - a Unified Visualization of Computational Accelerator Physics Data”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC069, pp. 1880-1882.
[n] F. Toufexis, T. Tang, and S. G. Tantawi, “A 200 ?Ám-period Laser-driven Undulator”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOP047, pp. 131-136.
[n] E. N. Zaplatine, “Better RF Cavities for HERA/PETRA”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP44C, pp. 1832-1836.
[n] F. Marti and S. Snyder, “Internal Beam Dynamics Studies with a TV Probe”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper IXB-05, pp. 435-438.
[n] Yu. Ts. Oganessian et al., “The Present Status and Perspectives of Development of the JINR Laboratory of Nuclear Reactions Heavy Ion Accelerators”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper H06, pp. 317-321.
[n] S. G. Shasharina, J. R. Cary, M. A. Durant, S. E. Kruger, and S. A. Veitzer, “VizSchema - A Standard Approach for Visualization of Computational Accelerator Physics Data”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper WE2IOPK05, pp. 101-106.
[n] M. Olveg?Ñrd et al., “Spectrometry in the Test Beam Line at CTF3”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE060, pp. 1113-1115.
[n] A. Zavadtsev, “Selective Method of Maximum Current Increasing in Electron LINACS”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2179-2182.
[n] Q. Wang, Q. Luo, B. G. Sun, B. Gao, and Y. B. Leng, “A Study on the Resolution of Bunch Length Measurement System Using Harmonic Method”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 415-418. doi:10.18429/JACoW-IBIC2017-WEPCF02
For LaTeX
Use Complete Form
For BibTeX
References
- W. Lou, C. Mayes, and Y. Cai, “Two Dimensional Transient CSR Simulation in Julia”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA001, unpublished.
- J. Harzheim, D. Domont-Yankulova, K. Gross, H. Klingbeil, and M. Frey, “Input Signal Generation for Barrier Bucket RF Systems at GSI”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3359-3362.
- G. Eremeev et al., “First results from two Nb3Sn cavities assembled in a CEBAF quarter cryomodule”, presented at the 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, paper THPB020, unpublished.
- C. Liu et al., “Crossing angle implementation for luminosity maximization in a narrow vertex region in RHIC operation”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPC03, pp. 36-39.
- J. Kamiya et al., “Measurement of the Extraction Kicker System in J-PARC RCS”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS110, pp. 1759-1761.
- A. Lunin, G. Romanov, N. Solyak, and M. Wendt, “Design of a Submicron Resolution Cavity BPM for the ILC Main Linac”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper TUPC23, pp. 192-194.
- A. N. Didenko, “About One Possible Explanation of Influence of Microwave Magnetic Field on Quality Factor of Superconducting Accelerating System”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP073L, pp. 2130-2131.
- P. Wang, D. Z. Cao, H. B. Chen, J. Shi, Z. H. Wang, and H. Zha, “Fabrication and Cold Test of the Correction Cavity Chain for Klystron-Based CLIC”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4014-4016.
- S. I. Meigo, A. Akutsu, K. I. Ikezaki, M. Ooi, and H. Fujimori, “Beam Flattening System based on Non-linear Optics for High Power Spallation Neutron Target at J-PARC”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 896-898.
- J. R. Cary, S. G. Shasharina, and W. Wan, “Mapa - An Object Oriented Code with a Graphical User Interface for Accelerator Design and Analysis”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP134G, pp. 1301-1302.
- J. Crittenden, G. Hoffstaetter, M. Liepe, C. Mayes, and D. Sagan, “BBU Calculations for ERLs”, in Proc. 45th ICFA Advanced Beam Dynamics Workshop on Energy Recovery LINAC Workshop (ERL'09), Ithaca, NY, USA, Jun. 2009, paper JS203, pp. 82-84.
- L. Jensen, O. R. Jones, and H. Schmickler Geneva, “First results on closed-loop tune control in the CERN-SPS”, in Proc. 4th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'99), Chester, UK, May 1999, paper PT05, pp. XX-XX.
- C. Z. Antoine and D. Cochet, “Hydroforming of Niobium RF Cavities: Mechanical Properties of Nb in Relation to its Forming Ability”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95F09, pp. 581-585.
- K. A. Brown et al., “Performance and Capabilities of the NASA Space Radiation Laboratory at BNL”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH099, pp. 270-272.
- D. L. Bruhwiler, J. R. Cary, and S. G. Shasharina, “Object Oriented C++ Software Components for Accelerator Design”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEDL6, pp. 369-371.
- H. L. Hagedoorn and W. M. Schulte, “Accelerated Particles in an AVF Cyclotron with a One or a Two Dee System”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper F-06, pp. 2329-2333.
- A. M. Semenov et al., “The Thermal Outgassing Rate of Materials Used in Vacuum Systems”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2447-2449.
- H. S. Kim, Y.-S. Cho, J. J. Dang, H. S. Jeong, H.-J. Kwon, and S. Lee, “Design Study on the Superconducting HWR for Secondary Particle Generation at KOMAC”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 499-501.
- P. M. Ivanov, Y. Alexahin, J. Annala, V. Lebedev, and V. D. Shiltsev, “Landau Damping of the Weak Head-Tail Instability at Tevatron”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MPPP042, pp. 2714-2716.
- C. J. A. Corsten and H. L. Hagedoorn, “Uncoupled and Coupled Orbit Motion in a Storage Ring”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2624-2627.
- I. Stevani, N. Milas, X. R. Resende, and L. N. P. Vilela, “High Level Applications for Sirius”, in Proc. 11th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'16), Campinas, Brazil, Oct. 2016, pp. 47-49.
- J. I. M. Botman, H. L. Hagedoorn, and R. F. Kruis, “Extraction Efficiency Optimization for the Eindhoven AVF Cyclotron”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper EP-30, pp. 489-491.
- S. G. Shasharina, D. Alexander, J. R. Cary, M. A. Durant, S. E. Kruger, and S. A. Veitzer, “VizSchema - a Unified Visualization of Computational Accelerator Physics Data”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEC069, pp. 1880-1882.
- F. Toufexis, T. Tang, and S. G. Tantawi, “A 200 ?Ám-period Laser-driven Undulator”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper MOP047, pp. 131-136.
- E. N. Zaplatine, “Better RF Cavities for HERA/PETRA”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP44C, pp. 1832-1836.
- F. Marti and S. Snyder, “Internal Beam Dynamics Studies with a TV Probe”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper IXB-05, pp. 435-438.
- Yu. Ts. Oganessian et al., “The Present Status and Perspectives of Development of the JINR Laboratory of Nuclear Reactions Heavy Ion Accelerators”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper H06, pp. 317-321.
- S. G. Shasharina, J. R. Cary, M. A. Durant, S. E. Kruger, and S. A. Veitzer, “VizSchema - A Standard Approach for Visualization of Computational Accelerator Physics Data”, in Proc. 10th Int. Computational Accelerator Physics Conf. (ICAP'09), San Francisco, CA, USA, Aug.-Sep. 2009, paper WE2IOPK05, pp. 101-106.
- M. Olveg?Ñrd et al., “Spectrometry in the Test Beam Line at CTF3”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE060, pp. 1113-1115.
- A. Zavadtsev, “Selective Method of Maximum Current Increasing in Electron LINACS”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 2179-2182.
- Q. Wang, Q. Luo, B. G. Sun, B. Gao, and Y. B. Leng, “A Study on the Resolution of Bunch Length Measurement System Using Harmonic Method”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 415-418.
Back to search