Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Li and S. Ohnuma, “Two-Parameter Sorting of Dipoles in Large Synchrotrons”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1175-1178.
[n] K. Suda et al., “Drift Tube Linac Cavities with Space-saving Amplifier Coupling of New Injector for RIKEN RI-Beam Factory”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA023, pp. 3726-3728.
[n] S. K. Sharma, C. Amundsen, F. A. DePaola, and J. L. Tuozzolo, “Frontend Slits for Closely-Spaced Wiggler Beams”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 424-426. doi:10.18429/JACoW-MEDSI2018-THPH41
[n] N. Ohuchi et al., “The First Cool-down Tests of the 6 Meter-Long-Cryomodules for Superconducting RF Test Facility (STF) at KEK”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP144, pp. 892-894.
[n] S. S. Chang et al., “Initial Results from the S-band RF Gun at SRRC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP2A08, pp. 1651-1653.
[n] V. P. Yakovlev, I. K. Drozdov, I. G. Gonin, N. Perunov, and N. Solyak, “Low-Beta Structure for High Energy Part of Project X”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP063, pp. 972-974.
[n] J. R. Chen, C. C. Kuo, G. H. Luo, and R. C. Sah, “Operational Status of the Taiwan Light Source”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP38G, pp. 638-640.
[n] R. A. Jameson and J. D. Wallace, “Feedforward Control of Accelerator RF Fields”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 598-601.
[n] W. H. Cheng, A. V. Fedotov, and R. L. Gluckstern, “Frequency Dependence of the Polarizability and Susceptibility of a Circular Hole in a Thick Conducting Wall”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPR12, pp. 3266-3268.
[n] T. Konstantin et al., “Practical Design of Resonance Frequency Tuning System for Coaxial RF Cavity for Thermionic Triode RF Gun”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper TUPD41, pp. 333-336.
[n] J. Watanabe et al., “Higher Order Mode (HOM) Damper of 500 MHz Damped Cavity for ASP Storage Ring”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH132, pp. 1325-1327.
[n] H. R. Schneider et al., “A Compact H- Cyclotron for Isotope Production”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1502-1505.
[n] M. Palm, E. Bravin, and S. Mazzoni, “Near-Saturation Single-Photon Avalanche Diode Afterpulse and Sensitivity Correction Scheme for the LHC Longitudinal Density Monitor”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOPD11, pp. 169-173.
[n] S. Sasaki, A. Miyamoto, M. Hosaka, N. Yamamoto, M. Katoh, and T. Konomi, “Analyses of Light's Orbital Angular Momentum from Helical Undulator Harmonics”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1563-1566. doi:10.18429/JACoW-IPAC2015-TUPWA061
[n] M. Min, P. F. Fischer, and Y.-C. Chae, “Wake Fields in 9-Cell TESLA Accelerating Structures: Spectral Element Discontinuous Galerkin (SEDG) Simulations”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP34, pp. XX-XX.
[n] J. Schwartz, R. P. Johnson, S. A. Kahn, and M. Kuchnir, “High Field Superconductor for Muon Cooling”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPD022, pp. 2455-2457.
[n] S. K. Sharma, F. A. DePaola, F. C. Lincoln, and J. L. Tuozzolo, “Deformable RF Fingers with Axial Extension”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 15-19. doi:10.18429/JACoW-MEDSI2018-TUOPMA08
[n] M. H. Lee et al., “Developing White Beam Components of TPS Beamline 24A”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 183-186. doi:10.18429/JACoW-MEDSI2016-TUPE12
[n] W. W. Li, Z. G. He, R. Huang, Q. K. Jia, and G. Zhou, “Generation and Measurement of Sub-picosecond Electron Bunch in Photocathode RF Gun”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI038, pp. 372-374.
[n] A. D. Kovalenko and A. Kolomiets, “The New Option for a Front End of Ion Linac”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper THPLB06, pp. 822-824.
[n] G. H. Luo, L. H. Chang, M.-C. Lin, Ch. Wang, and T. S. Hu, “Progress Report and Operational Consideration of Superconducting RF Cavity at TLS”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH150, pp. 1131-1133.
[n] L. Faillace et al., “Development of an Ultra-High Repetition Rate S-Band RF Gun for the SPARX Project”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE1PBC05, pp. 1815-1817.
[n] S. V. Benson, “First Lasing of the Jefferson Lab UV Demo Laser”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper MOOAI8, pp. 14-14.
[n] W. V. Hassenzahl, W. C. Armstrong, and J. D. Rogers, “The Effects of Radiation on Superconducting Nb-Ti Wire”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 683-685.
[n] H. Hama, M. Hosaka, H. Tanaka, and J. Yamazaki, “Consideration for an FEL-Optimized Electron Storage Ring”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6D023, pp. 728-730.
[n] J. Chen, R. MacKenzie, and M. Laznovsky, “Integrating Newer Technology Software Systems into the SLAC Legacy Control System - Two Case Histories and New CMLOG Developments”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP022, pp. XX-XX.
[n] T. Sugimoto et al., “Continuously Adjustable Permanent Magnet Quadrupole for a Final Focus”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP015, pp. 583-585.
[n] Y. H. Chin, S. Lee, Y. Shobuda, K. Takata, T. Toyama, and H. Tsutsui, “Impedance and radiation generated by a ceramic chamber with RF shields and TiN coating”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper TUBX01, pp. 125-127.
[n] J. F. Hua, H. Chen, Q. X. Jin, J. Shi, and D. C. Tong, “Physical Design of 4 MeV/2.5 MeV Dual-Energy X-Band SW Accelerator”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP089, pp. 4987-4989.
[n] R. Kinjo et al., “Performance of Bulk HTSC Staggered Array Undulator at Low Temperature”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper THPC22, pp. 679-682.
[n] G. C. Blaker, A. K. Mitra, and R. L. Poirier, “TRIUMF Cyclotron RF System Improvements”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper XA-11, pp. 545-548.
[n] F. Wang, N. V. Mokhov, A. I. Drozhdin, B. Parker, R. Soundranayagam, and R. Schailey, “Consequences of Kicker Failure During HEB to Collider Injection and Possible Mitigation”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1360-1363.
[n] C. Liu, G. J. Marr, A. Marusic, M. G. Minty, and V. Schoefer, “RHIC Heavy Ion Operation With Near-Integer Working Point”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 544-547. doi:10.18429/JACoW-IPAC2019-MOPMP045
[n] A. H. Lumpkin, W. J. Berg, B. X. Yang, and M. White, “Time-Resolved Imaging for the APS Linac Beams”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4059, pp. 529-531.
[n] P. S. Martin, “Performance of the Fermilab Main Ring During the 1988-89 Tevatron Collider Operation”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1829-1831.
[n] D. Fonnesu et al., “Influence of the Coating Parameters on the Tc of Nb₃Sn Thin Films on Copper Deposited via DC Magnetron Sputtering”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 92-95. doi:10.18429/JACoW-SRF2023-MOPMB013
[n] D. F. Orris et al., “Fast Thermometry for Superconducting RF Cavity Testing”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN105, pp. 2280-2282.
[n] H. Yokomizo et al., “Injection System for the 8 GeV Synchrotron Radiation Facility in Japan”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1245-1248.
[n] S. A. Belomestnykh et al., “HELEN: A Linear Collider Based on Advanced SRF Technology”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 31-34. doi:10.18429/JACoW-LINAC2022-MOPOJO03
[n] S. D. Webb, V. Litvinenko, and G. Wang, “General Results on the Nature of FEL Amplification”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP093, pp. 1804-1806.
[n] J.-P. Potier and T. Risselada, “Fundamental Design Principles of Linear Collider Damping Rings, with an Application to CLIC”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP7B07, pp. 999-1001.
[n] G. De Rijk, “The CERN High Field Magnet Program”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPD009, pp. 2419-2421.
[n] K. Papastergiou et al., “Recent developments in the accelerator equipment automation field”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 61-64. doi:10.18429/JACoW-IPAC2025-MOCN2
[n] H. D. Glass, “Techniques for Measurement of Dipole Endfields with a Rigid Integrating Coil”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2859-2862.
[n] J.-F. Ostiguy, “Longitudinal Profile and Effective Length of a Conventional Dipole Magnet”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2901-2904.
[n] G. L. Carr et al., “Coherent Radiation Measurements at the NSLS Source Development Lab”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH069, pp. 2608-2610.
[n] S. Ushijima, H. Fujisawa, M. Ichikawa, Y. Iwashita, H. Tongu, and M. Yamada, “LEBT with Hybrid Magnets in a Proton Linac for Compact Neutron Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB013, pp. 304-306.
[n] M. Tejima, “Beam Based Calibration for Beam Position Monitors”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 266-272. doi:10.18429/JACoW-IBIC2015-TUBLA01
[n] G. P. Gallerano, A. Doria, E. Giovenale, G. Messina, I. P. Spassovsky, and C. R. Frascati, “Compact THz FELs and Their Potential in Biological Applications”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper TUPP032, pp. XX-XX.
[n] R. Hajima and T. Tajima, “Beyond the International Linear Collider: Driven by FEL with Energy Recovery at 5-10TeV”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper TUPP066, pp. XX-XX.
[n] N. Aquilina, “Expected and Measured Behaviour of the Tune in the LHC Operation at 3.5 TeV”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPD025, pp. 3554-3556.
[n] R. K. Jobe, N. Phinney, and K. Thompson, “Klystron Control Software in the SLC”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2110-2112.
[n] F. Ravotti et al., “The IRRAD Proton Irradiation Facility Control, Data Management and Beam Diagnostic Systems: An Outlook of the Major Upgrades Beyond the CERN Long Shutdown 2”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1393. doi:10.18429/JACoW-ICALEPCS2019-WEPHA127
For LaTeX
Use Complete Form
For BibTeX
References
- M. Li and S. Ohnuma, “Two-Parameter Sorting of Dipoles in Large Synchrotrons”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1175-1178.
- K. Suda et al., “Drift Tube Linac Cavities with Space-saving Amplifier Coupling of New Injector for RIKEN RI-Beam Factory”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEA023, pp. 3726-3728.
- S. K. Sharma, C. Amundsen, F. A. DePaola, and J. L. Tuozzolo, “Frontend Slits for Closely-Spaced Wiggler Beams”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 424-426.
- N. Ohuchi et al., “The First Cool-down Tests of the 6 Meter-Long-Cryomodules for Superconducting RF Test Facility (STF) at KEK”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP144, pp. 892-894.
- S. S. Chang et al., “Initial Results from the S-band RF Gun at SRRC”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP2A08, pp. 1651-1653.
- V. P. Yakovlev, I. K. Drozdov, I. G. Gonin, N. Perunov, and N. Solyak, “Low-Beta Structure for High Energy Part of Project X”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP063, pp. 972-974.
- J. R. Chen, C. C. Kuo, G. H. Luo, and R. C. Sah, “Operational Status of the Taiwan Light Source”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP38G, pp. 638-640.
- R. A. Jameson and J. D. Wallace, “Feedforward Control of Accelerator RF Fields”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 598-601.
- W. H. Cheng, A. V. Fedotov, and R. L. Gluckstern, “Frequency Dependence of the Polarizability and Susceptibility of a Circular Hole in a Thick Conducting Wall”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPR12, pp. 3266-3268.
- T. Konstantin et al., “Practical Design of Resonance Frequency Tuning System for Coaxial RF Cavity for Thermionic Triode RF Gun”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper TUPD41, pp. 333-336.
- J. Watanabe et al., “Higher Order Mode (HOM) Damper of 500 MHz Damped Cavity for ASP Storage Ring”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH132, pp. 1325-1327.
- H. R. Schneider et al., “A Compact H- Cyclotron for Isotope Production”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1502-1505.
- M. Palm, E. Bravin, and S. Mazzoni, “Near-Saturation Single-Photon Avalanche Diode Afterpulse and Sensitivity Correction Scheme for the LHC Longitudinal Density Monitor”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper MOPD11, pp. 169-173.
- S. Sasaki, A. Miyamoto, M. Hosaka, N. Yamamoto, M. Katoh, and T. Konomi, “Analyses of Light's Orbital Angular Momentum from Helical Undulator Harmonics”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1563-1566.
- M. Min, P. F. Fischer, and Y.-C. Chae, “Wake Fields in 9-Cell TESLA Accelerating Structures: Spectral Element Discontinuous Galerkin (SEDG) Simulations”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper TUP34, pp. XX-XX.
- J. Schwartz, R. P. Johnson, S. A. Kahn, and M. Kuchnir, “High Field Superconductor for Muon Cooling”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPD022, pp. 2455-2457.
- S. K. Sharma, F. A. DePaola, F. C. Lincoln, and J. L. Tuozzolo, “Deformable RF Fingers with Axial Extension”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 15-19.
- M. H. Lee et al., “Developing White Beam Components of TPS Beamline 24A”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 183-186.
- W. W. Li, Z. G. He, R. Huang, Q. K. Jia, and G. Zhou, “Generation and Measurement of Sub-picosecond Electron Bunch in Photocathode RF Gun”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPFI038, pp. 372-374.
- A. D. Kovalenko and A. Kolomiets, “The New Option for a Front End of Ion Linac”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper THPLB06, pp. 822-824.
- G. H. Luo, L. H. Chang, M.-C. Lin, Ch. Wang, and T. S. Hu, “Progress Report and Operational Consideration of Superconducting RF Cavity at TLS”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH150, pp. 1131-1133.
- L. Faillace et al., “Development of an Ultra-High Repetition Rate S-Band RF Gun for the SPARX Project”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE1PBC05, pp. 1815-1817.
- S. V. Benson, “First Lasing of the Jefferson Lab UV Demo Laser”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper MOOAI8, pp. 14-14.
- W. V. Hassenzahl, W. C. Armstrong, and J. D. Rogers, “The Effects of Radiation on Superconducting Nb-Ti Wire”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 683-685.
- H. Hama, M. Hosaka, H. Tanaka, and J. Yamazaki, “Consideration for an FEL-Optimized Electron Storage Ring”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 6D023, pp. 728-730.
- J. Chen, R. MacKenzie, and M. Laznovsky, “Integrating Newer Technology Software Systems into the SLAC Legacy Control System - Two Case Histories and New CMLOG Developments”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper THAP022, pp. XX-XX.
- T. Sugimoto et al., “Continuously Adjustable Permanent Magnet Quadrupole for a Final Focus”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP015, pp. 583-585.
- Y. H. Chin, S. Lee, Y. Shobuda, K. Takata, T. Toyama, and H. Tsutsui, “Impedance and radiation generated by a ceramic chamber with RF shields and TiN coating”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper TUBX01, pp. 125-127.
- J. F. Hua, H. Chen, Q. X. Jin, J. Shi, and D. C. Tong, “Physical Design of 4 MeV/2.5 MeV Dual-Energy X-Band SW Accelerator”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP089, pp. 4987-4989.
- R. Kinjo et al., “Performance of Bulk HTSC Staggered Array Undulator at Low Temperature”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper THPC22, pp. 679-682.
- G. C. Blaker, A. K. Mitra, and R. L. Poirier, “TRIUMF Cyclotron RF System Improvements”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper XA-11, pp. 545-548.
- F. Wang, N. V. Mokhov, A. I. Drozhdin, B. Parker, R. Soundranayagam, and R. Schailey, “Consequences of Kicker Failure During HEB to Collider Injection and Possible Mitigation”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1360-1363.
- C. Liu, G. J. Marr, A. Marusic, M. G. Minty, and V. Schoefer, “RHIC Heavy Ion Operation With Near-Integer Working Point”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 544-547.
- A. H. Lumpkin, W. J. Berg, B. X. Yang, and M. White, “Time-Resolved Imaging for the APS Linac Beams”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4059, pp. 529-531.
- P. S. Martin, “Performance of the Fermilab Main Ring During the 1988-89 Tevatron Collider Operation”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1829-1831.
- D. Fonnesu et al., “Influence of the Coating Parameters on the Tc of Nb₃Sn Thin Films on Copper Deposited via DC Magnetron Sputtering”, in Proc. 21th Int. Conf. RF Superconductivity (SRF'23), Grand Rapids, MI, USA, Jun. 2023, paper MOPMB013, pp. 92-95.
- D. F. Orris et al., “Fast Thermometry for Superconducting RF Cavity Testing”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN105, pp. 2280-2282.
- H. Yokomizo et al., “Injection System for the 8 GeV Synchrotron Radiation Facility in Japan”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1245-1248.
- S. A. Belomestnykh et al., “HELEN: A Linear Collider Based on Advanced SRF Technology”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 31-34.
- S. D. Webb, V. Litvinenko, and G. Wang, “General Results on the Nature of FEL Amplification”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPP093, pp. 1804-1806.
- J.-P. Potier and T. Risselada, “Fundamental Design Principles of Linear Collider Damping Rings, with an Application to CLIC”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP7B07, pp. 999-1001.
- G. De Rijk, “The CERN High Field Magnet Program”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPD009, pp. 2419-2421.
- K. Papastergiou et al., “Recent developments in the accelerator equipment automation field”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOCN2, pp. 61-64.
- H. D. Glass, “Techniques for Measurement of Dipole Endfields with a Rigid Integrating Coil”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2859-2862.
- J.-F. Ostiguy, “Longitudinal Profile and Effective Length of a Conventional Dipole Magnet”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2901-2904.
- G. L. Carr et al., “Coherent Radiation Measurements at the NSLS Source Development Lab”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH069, pp. 2608-2610.
- S. Ushijima, H. Fujisawa, M. Ichikawa, Y. Iwashita, H. Tongu, and M. Yamada, “LEBT with Hybrid Magnets in a Proton Linac for Compact Neutron Source”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB013, pp. 304-306.
- M. Tejima, “Beam Based Calibration for Beam Position Monitors”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 266-272.
- G. P. Gallerano, A. Doria, E. Giovenale, G. Messina, I. P. Spassovsky, and C. R. Frascati, “Compact THz FELs and Their Potential in Biological Applications”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper TUPP032, pp. XX-XX.
- R. Hajima and T. Tajima, “Beyond the International Linear Collider: Driven by FEL with Energy Recovery at 5-10TeV”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper TUPP066, pp. XX-XX.
- N. Aquilina, “Expected and Measured Behaviour of the Tune in the LHC Operation at 3.5 TeV”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPD025, pp. 3554-3556.
- R. K. Jobe, N. Phinney, and K. Thompson, “Klystron Control Software in the SLC”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2110-2112.
- F. Ravotti et al., “The IRRAD Proton Irradiation Facility Control, Data Management and Beam Diagnostic Systems: An Outlook of the Major Upgrades Beyond the CERN Long Shutdown 2”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1393.
Back to search