Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. Choi et al., “Upgrade of Corrector Power Supplies for Pohang Light Source”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPA13, pp. 342-344.
[n] R. Bourque et al., “The APS SCRF Cryomodule: Present Status and Potential Future Plans”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA155, pp. 2954-2956.
[n] M. W. Bruker, K. Aulenbacher, J. Dietrich, S. Friederich, A. Hofmann, and T. Weilbach, “Operational Experience with the HESR Electron Cooler Test Set-up”, in Proc. COOL'13, Mürren, Switzerland, Jun. 2013, paper WEPPO03, pp. 100-102.
[n] H. A. Willax, “Status Report on SIN (Invited paper)”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper A-03, pp. 33-40.
[n] G. H. Neuschaefer, T. S. Bhatia, J. H. Billen, S. Nath, and J. M. Watson, “SSC Drift Tube Linac Physics Design”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TU418, pp. 351-354.
[n] V. Litvinenko et al., “High Gain FEL Amplification of Charge Modulation Caused by a Hadron”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper MOPPH026, pp. 51-54.
[n] G.-Y. Hsiung, C.-M. Cheng, and R. Valizadeh, “Measurement of the Photoelectron Yield from the Synchrotron Radiation for the NEG-coated Tubes”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4294-4297. doi:10.18429/JACoW-IPAC2023-THPA145
[n] K. Seiya et al., “Multi-batch Slip Stacking in the Main Injector at Fermilab”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUODKI03, pp. 742-744.
[n] T. Maruta, M. Ikegami, A. Miura, G. H. Wei, and H. Sako, “Longitudinal Beam Profile Measurement at J-PARC Separated Drift Tube Linac”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC100, pp. 1245-1247.
[n] Y. Sun et al., “Study with One Global Crab Cavity at IR4 for LHC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP020, pp. 2528-2530.
[n] B. Z. L. Moreno, R. M. Caliari, R. R. Geraldes, and M. A. L. Moraes, “Rapid Control Prototyping Tool for the Sirius High-Dynamic DCM Control System”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1941-1946. doi:10.18429/JACoW-ICALEPCS2017-THPHA214
[n] J. P. Blewett, “Bunchers”, in Proc. LINAC'62, Long Island, NY, USA, Aug. 1962, paper C-04, pp. 261-266.
[n] D. L. Turner, “Software Tools for Emittance Measurement and Matching for 12 GeV CEBAF”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2792-2795. doi:10.18429/JACoW-IPAC2016-WEPOR053
[n] C. Zhang et al., “From EUROTRANS to MAX: New Strategies and Approaches for the Injector Development”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS043, pp. 2583-2585.
[n] B. Frias, J. Alonso, R. Dwinell, and F. Lothrop, “Control of the Bevatron/Bevalac Main Guide Field Power Supply for Fast Ion Switching Operation”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1896-1899.
[n] S. K. Sharma, “A Girder-Free Magnet Support System Design”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 236-238. doi:10.18429/JACoW-MEDSI2016-TUPE32
[n] A. Kosicek, S. Bassanese, and M. Znidarcic, “Libera Brilliance Single Pass Position Measurements”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP055, pp. 3579-3581.
[n] J. Moss, G. Toby, and S.-W. Lee, “Conceptual frequency analysis-based predictive maintenance”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3785-3787. doi:10.18429/JACoW-IPAC2023-WEPM090
[n] P. Collier et al., “Reducing the SPS Machine Impedance”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI082, pp. 1458-1460.
[n] I. M. Kapchinskiy, “Choice of the Block-Scheme of 1-1.5 GeV 300 mA Linear Accelerator”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH466, pp. 776-777.
[n] A. Alb?á, A. Adelmann, and A. Fallahi, “OPAL for Self-Consistent Start-to-End Simulation of Undulator-Based Facilities”, presented at the NAPAC'22, Albuquerque, NM, USA, Aug. 2022, paper WEXD4, unpublished.
[n] T. E. Plawski et al., “Resonance Control System for the CEBAF Separator Upgrade”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 792-794. doi:10.18429/JACoW-LINAC2016-THPRC012
[n] G. Iadarola et al., “Xsuite: an integrated beam physics simulation framework”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2623-2626. doi:10.18429/JACoW-IPAC2024-WEPR56
[n] C. Benvenuti, “Non-Evaporable Getters : from Pumping Strips to Thin Film Coatings”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THZ02A, pp. 200-206.
[n] J. P. Koutchouk, “Self-compensation of the LEP Distributed Skew Gradient”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 702-705.
[n] L. Li et al., “LLRF Control System for RF GUN at SXFEL Test Facility”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3912-3914. doi:10.18429/JACoW-IPAC2019-THPRB044
[n] Z. Zhang, C.-X. Tang, and H. J. Qian, “A Spatially Separated Two Frequency RF Gun Design for Beam Brightness Improvement”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2572-2575. doi:10.18429/JACoW-IPAC2016-WEPMY013
[n] T. Himel, L. Hendrickson, F. Rouse, and H. Shoaee, “Use of Digital Control Theory State Space Formalism for Feedback at SLC”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1451-1454.
[n] M. Guthoff, “Design and Experiences with the Beam Condition Monitor as Protection System in the CMS Experiment of the LHC”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper TUPD42, pp. 398-400.
[n] D. Grier, E. Jensen, R. Losito, and A. Mitra, “The PS 80 MHz Cavities”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP02H, pp. 1773-1775.
[n] Y. W. Parc, M. S. Chae, J. H. Hong, and I. S. Ko, “Simulation Study on Emittance Increase due to RF Asymmetry”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPE038, pp. 2224-2226.
[n] S. Yu. Kazakov, “X-Band TE10-TE01 Mode Converters (Oral Poster)”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TU-32, pp. 442-444.
[n] J. L. Hirshfield, T. C. Marshall, S. V. Shchelkunov, and G. V. Sotnikov, “A Fast Kicker Using a Rectangular Dielectric Wakefield Accelerator Structure”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR2RAC03, pp. 4267-4269.
[n] R. P. Johnson and S. A. Bogacz, “Linacs for Future Muon Facilities”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper FR202, pp. 1119-1123.
[n] A. Lagzda et al., “Very-High Energy Electron (VHEE) Studies at CERN's CLEAR User Facility”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 445-448. doi:10.18429/JACoW-IPAC2018-MOPML023
[n] J. Bosser, J. Dieperink, G. Ferioli, J. Mann, and L. Warstki, “Time-Dependent Structure and Spill Measurements of Proton Beams at the CERN SPS”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1905-1908.
[n] T. P. Wangler, T. S. Bhatia, T. E. Blue, R. A. Gahbauer, J. E. Stovall, and C. K. C. Wang, “Conceptual Design of an RFQ Accelerator-Based Neutron Source for Boron Neutron-Capture Therapy”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 678-681.
[n] A. Mosnier, “The IFMIF 5 MW Linacs”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper FR201, pp. 1114-1118.
[n] A. A. Efremov et al., “All-permanent Magnet ECR Ion Source DECRIS-PM”, in Proc. HIAT'18, Lanzhou, China, Oct. 2018, pp. 89-91. doi:10.18429/JACoW-HIAT2018-TUOXA01
[n] H. Ren, G. Toby, J. Moss, S.-H. Kim, and S.-W. Lee, “Drift Tube Linac (DTL) steering magnets replacement design at SNS”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 722-724. doi:10.18429/JACoW-LINAC2024-THPB042
[n] H. Sakai et al., “Operational Experience of CW SRF Injector and Main Linac Cryomodules at the Compact ERL”, in Proc. ERL'15, Stony Brook, NY, USA, Jun. 2015, pp. 63-66. doi:10.18429/JACoW-ERL2015-WEIBLH2054
[n] H. L. Luo, H. Hao, X. Q. Wang, and Y. C. Xu, “Beam Optics and Magnet Design of Helium Ion FFAG Accelerator”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD026, pp. 4331-4333.
[n] D. L. Turner, “New Methods for Dispersion Measurement and Correction for 12 GeV CEBAF”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4882-4884. doi:10.18429/JACoW-IPAC2018-THPML094
[n] A. Khan, S. K. Sharma, and V. V. Smaluk, “Review of Alignment and Stability Tolerances for Advanced Light Sources”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 588-591. doi:10.18429/JACoW-IPAC2022-MOPOTK054
[n] R. E. Pollock, “Status Report on the Indiana University Cyclotron Facility (Invited paper)”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper A-02, pp. 27-32.
[n] Yu. A. Kubyshin, A. V. Poseryaev, J. P. Rigla, and V. I. Shvedunov, “Analytic Description of the Phase Slip Effect in Race-Track Microtrons”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN063, pp. 3369-3371.
[n] L. Sanfelici, H. O. C. Duarte, and S. R. Marques, “Design and Impedance Optimization of the LNLS-UVX Longitudinal Kicker Cavity”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPC08, pp. 369-372.
[n] T. Sipahi, S. Biedron, and S. V. Milton, “Co-Linear X-Band Energy Booster (XCEB) Cavity and RF System Details”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3421-3424. doi:10.18429/JACoW-IPAC2015-WEPTY063
[n] S. Igarashi, Y. Kuniyasu, S. Nakamura, T. Oogoe, H. Someya, and S. Yamada, “Magnetic Field Ripple Reduction of Main Magnets of the J-PARC Main Ring using Trim Coils”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB011, pp. 301-303.
[n] V. V. Khankin, N. I. Pakhomov, V. I. Shvedunov, A. I. Karev, and V. G. Raevsky, “Operational Experience with 55 MeV Pulsed RTM”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEPPC047, pp. 538-540.
[n] Z. Zhang and H. Wang, “The Magnetic Measurement of Enhancer-Dipole Magnet for CEPC”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2866-2868. doi:10.18429/JACoW-IPAC2018-WEPML076
[n] M. Grieser et al., “Recent Developments at the Heidelberg Heavy Ion Cooler Storage Ring TSR”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 152-155.
[n] R. Calaga et al., “Beam Losses Due to Abrupt Crab Cavity Failures in the LHC”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOODN4, pp. 76-78.
[n] J. H. Ormrod, “Overview of Superconducting Cyclotron Projects”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2062-2067.
[n] T. J. Fessenden, “Induction Linacs for Heavy Ion Fusion Research”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper FRE0003, pp. 485-489.
[n] S. Ninomiya, T. Saito, H. Tamura, and K. Sato, “RCNP Techniques for Producing Ultra-Precise Beams”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper F-3, pp. XX-XX.
[n] A. H. Botha, “The Status of the South African National Accelerator Centre”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper ABI-04, pp. 33-42.
[n] J. C. Yoon, J. Choi, K. M. Ha, J. H. Kim, J. M. Kim, and J.-W. Lee, “EPICS Based Control System for the KOMAC RF System”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPLT071, pp. 716-718.
[n] A. D. Kovalenko et al., “Superconducting Magnets for the NICA Facility at JINR: Status of the Design and Construction Plans”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEB040, pp. 361-363.
[n] A. Narayan, Y. Kang, J. Moss, H. Ren, S.-W. Lee, and G. Toby, “RF Tuning for the SNS LINAC RFQ”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPA128, unpublished.
[n] G. Hansen, K. Kishiyama, S. Shen, and P. V. Shoaff, “Design and Development of the Vacuum Systems for the APT Project ED&D Cryomodule”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA113, pp. 1336-1338.
[n] J. Tooker and G. Lawrence, “Overview of the APT Accelerator Design”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA76, pp. 3567-3569.
[n] D. S. Yurov, A. S. Alimov, B. S. Ishkanov, V. P. Sakharov, N. I. Pakhomov, and V. I. Shvedunov, “Industrial Prototype of Compact CW Linac”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper WEPSB39, pp. 248-250.
[n] C. K. Kuan et al., “General Design of ID Front Ends in the TPS”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4601-4603. doi:10.18429/JACoW-IPAC2017-THPVA068
[n] G. N. Kulipanov et al., “Status of the Novosibirsk High Power Free Electron Laser”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper FRM101, pp. XX-XX.
[n] C. Kim et al., “Laser System of Photocathode RF Gun in Pohang Accelerator Laboratory”, in Proc. FLS'06, Hamburg, Germany, May 2006, paper WG403, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Choi et al., “Upgrade of Corrector Power Supplies for Pohang Light Source”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WPPA13, pp. 342-344.
- R. Bourque et al., “The APS SCRF Cryomodule: Present Status and Potential Future Plans”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA155, pp. 2954-2956.
- M. W. Bruker, K. Aulenbacher, J. Dietrich, S. Friederich, A. Hofmann, and T. Weilbach, “Operational Experience with the HESR Electron Cooler Test Set-up”, in Proc. 9th Workshop on Beam Cooling and Related Topics (COOL'13), Mürren, Switzerland, Jun. 2013, paper WEPPO03, pp. 100-102.
- H. A. Willax, “Status Report on SIN (Invited paper)”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper A-03, pp. 33-40.
- G. H. Neuschaefer, T. S. Bhatia, J. H. Billen, S. Nath, and J. M. Watson, “SSC Drift Tube Linac Physics Design”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TU418, pp. 351-354.
- V. Litvinenko et al., “High Gain FEL Amplification of Charge Modulation Caused by a Hadron”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper MOPPH026, pp. 51-54.
- G.-Y. Hsiung, C.-M. Cheng, and R. Valizadeh, “Measurement of the Photoelectron Yield from the Synchrotron Radiation for the NEG-coated Tubes”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPA145, pp. 4294-4297.
- K. Seiya et al., “Multi-batch Slip Stacking in the Main Injector at Fermilab”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUODKI03, pp. 742-744.
- T. Maruta, M. Ikegami, A. Miura, G. H. Wei, and H. Sako, “Longitudinal Beam Profile Measurement at J-PARC Separated Drift Tube Linac”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC100, pp. 1245-1247.
- Y. Sun et al., “Study with One Global Crab Cavity at IR4 for LHC”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP020, pp. 2528-2530.
- B. Z. L. Moreno, R. M. Caliari, R. R. Geraldes, and M. A. L. Moraes, “Rapid Control Prototyping Tool for the Sirius High-Dynamic DCM Control System”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1941-1946.
- J. P. Blewett, “Bunchers”, in Proc. 1962 Conf. on Linear Accelerators for High Energies (LINAC'62), Long Island, NY, USA, Aug. 1962, paper C-04, pp. 261-266.
- D. L. Turner, “Software Tools for Emittance Measurement and Matching for 12 GeV CEBAF”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2792-2795.
- C. Zhang et al., “From EUROTRANS to MAX: New Strategies and Approaches for the Injector Development”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPS043, pp. 2583-2585.
- B. Frias, J. Alonso, R. Dwinell, and F. Lothrop, “Control of the Bevatron/Bevalac Main Guide Field Power Supply for Fast Ion Switching Operation”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1896-1899.
- S. K. Sharma, “A Girder-Free Magnet Support System Design”, in Proc. 9th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'16), Barcelona, Spain, Sep. 2016, pp. 236-238.
- A. Kosicek, S. Bassanese, and M. Znidarcic, “Libera Brilliance Single Pass Position Measurements”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5RFP055, pp. 3579-3581.
- J. Moss, G. Toby, and S.-W. Lee, “Conceptual frequency analysis-based predictive maintenance”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPM090, pp. 3785-3787.
- P. Collier et al., “Reducing the SPS Machine Impedance”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPRI082, pp. 1458-1460.
- I. M. Kapchinskiy, “Choice of the Block-Scheme of 1-1.5 GeV 300 mA Linear Accelerator”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH466, pp. 776-777.
- A. Alb?á, A. Adelmann, and A. Fallahi, “OPAL for Self-Consistent Start-to-End Simulation of Undulator-Based Facilities”, presented at the North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, paper WEXD4, unpublished.
- T. E. Plawski et al., “Resonance Control System for the CEBAF Separator Upgrade”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 792-794.
- G. Iadarola et al., “Xsuite: an integrated beam physics simulation framework”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPR56, pp. 2623-2626.
- C. Benvenuti, “Non-Evaporable Getters : from Pumping Strips to Thin Film Coatings”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THZ02A, pp. 200-206.
- J. P. Koutchouk, “Self-compensation of the LEP Distributed Skew Gradient”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 702-705.
- L. Li et al., “LLRF Control System for RF GUN at SXFEL Test Facility”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3912-3914.
- Z. Zhang, C.-X. Tang, and H. J. Qian, “A Spatially Separated Two Frequency RF Gun Design for Beam Brightness Improvement”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2572-2575.
- T. Himel, L. Hendrickson, F. Rouse, and H. Shoaee, “Use of Digital Control Theory State Space Formalism for Feedback at SLC”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1451-1454.
- M. Guthoff, “Design and Experiences with the Beam Condition Monitor as Protection System in the CMS Experiment of the LHC”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper TUPD42, pp. 398-400.
- D. Grier, E. Jensen, R. Losito, and A. Mitra, “The PS 80 MHz Cavities”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP02H, pp. 1773-1775.
- Y. W. Parc, M. S. Chae, J. H. Hong, and I. S. Ko, “Simulation Study on Emittance Increase due to RF Asymmetry”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPE038, pp. 2224-2226.
- S. Yu. Kazakov, “X-Band TE10-TE01 Mode Converters (Oral Poster)”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TU-32, pp. 442-444.
- J. L. Hirshfield, T. C. Marshall, S. V. Shchelkunov, and G. V. Sotnikov, “A Fast Kicker Using a Rectangular Dielectric Wakefield Accelerator Structure”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR2RAC03, pp. 4267-4269.
- R. P. Johnson and S. A. Bogacz, “Linacs for Future Muon Facilities”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper FR202, pp. 1119-1123.
- A. Lagzda et al., “Very-High Energy Electron (VHEE) Studies at CERN's CLEAR User Facility”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 445-448.
- J. Bosser, J. Dieperink, G. Ferioli, J. Mann, and L. Warstki, “Time-Dependent Structure and Spill Measurements of Proton Beams at the CERN SPS”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1905-1908.
- T. P. Wangler, T. S. Bhatia, T. E. Blue, R. A. Gahbauer, J. E. Stovall, and C. K. C. Wang, “Conceptual Design of an RFQ Accelerator-Based Neutron Source for Boron Neutron-Capture Therapy”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 678-681.
- A. Mosnier, “The IFMIF 5 MW Linacs”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper FR201, pp. 1114-1118.
- A. A. Efremov et al., “All-permanent Magnet ECR Ion Source DECRIS-PM”, in Proc. 14th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'18), Lanzhou, China, Oct. 2018, pp. 89-91.
- H. Ren, G. Toby, J. Moss, S.-H. Kim, and S.-W. Lee, “Drift Tube Linac (DTL) steering magnets replacement design at SNS”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 722-724.
- H. Sakai et al., “Operational Experience of CW SRF Injector and Main Linac Cryomodules at the Compact ERL”, in Proc. 56th Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'15), Stony Brook, NY, USA, Jun. 2015, pp. 63-66.
- H. L. Luo, H. Hao, X. Q. Wang, and Y. C. Xu, “Beam Optics and Magnet Design of Helium Ion FFAG Accelerator”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPD026, pp. 4331-4333.
- D. L. Turner, “New Methods for Dispersion Measurement and Correction for 12 GeV CEBAF”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4882-4884.
- A. Khan, S. K. Sharma, and V. V. Smaluk, “Review of Alignment and Stability Tolerances for Advanced Light Sources”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 588-591.
- R. E. Pollock, “Status Report on the Indiana University Cyclotron Facility (Invited paper)”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper A-02, pp. 27-32.
- Yu. A. Kubyshin, A. V. Poseryaev, J. P. Rigla, and V. I. Shvedunov, “Analytic Description of the Phase Slip Effect in Race-Track Microtrons”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAN063, pp. 3369-3371.
- L. Sanfelici, H. O. C. Duarte, and S. R. Marques, “Design and Impedance Optimization of the LNLS-UVX Longitudinal Kicker Cavity”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUPC08, pp. 369-372.
- T. Sipahi, S. Biedron, and S. V. Milton, “Co-Linear X-Band Energy Booster (XCEB) Cavity and RF System Details”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3421-3424.
- S. Igarashi, Y. Kuniyasu, S. Nakamura, T. Oogoe, H. Someya, and S. Yamada, “Magnetic Field Ripple Reduction of Main Magnets of the J-PARC Main Ring using Trim Coils”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB011, pp. 301-303.
- V. V. Khankin, N. I. Pakhomov, V. I. Shvedunov, A. I. Karev, and V. G. Raevsky, “Operational Experience with 55 MeV Pulsed RTM”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper WEPPC047, pp. 538-540.
- Z. Zhang and H. Wang, “The Magnetic Measurement of Enhancer-Dipole Magnet for CEPC”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2866-2868.
- M. Grieser et al., “Recent Developments at the Heidelberg Heavy Ion Cooler Storage Ring TSR”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 152-155.
- R. Calaga et al., “Beam Losses Due to Abrupt Crab Cavity Failures in the LHC”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOODN4, pp. 76-78.
- J. H. Ormrod, “Overview of Superconducting Cyclotron Projects”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2062-2067.
- T. J. Fessenden, “Induction Linacs for Heavy Ion Fusion Research”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper FRE0003, pp. 485-489.
- S. Ninomiya, T. Saito, H. Tamura, and K. Sato, “RCNP Techniques for Producing Ultra-Precise Beams”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper F-3, pp. XX-XX.
- A. H. Botha, “The Status of the South African National Accelerator Centre”, in Proc. 9th Int. Cyclotron Conf. and Their Applications (Cyclotrons'81), Caen, France, Sep. 1981, paper ABI-04, pp. 33-42.
- J. C. Yoon, J. Choi, K. M. Ha, J. H. Kim, J. M. Kim, and J.-W. Lee, “EPICS Based Control System for the KOMAC RF System”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPLT071, pp. 716-718.
- A. D. Kovalenko et al., “Superconducting Magnets for the NICA Facility at JINR: Status of the Design and Construction Plans”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEB040, pp. 361-363.
- A. Narayan, Y. Kang, J. Moss, H. Ren, S.-W. Lee, and G. Toby, “RF Tuning for the SNS LINAC RFQ”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA128, unpublished.
- G. Hansen, K. Kishiyama, S. Shen, and P. V. Shoaff, “Design and Development of the Vacuum Systems for the APT Project ED&D Cryomodule”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA113, pp. 1336-1338.
- J. Tooker and G. Lawrence, “Overview of the APT Accelerator Design”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA76, pp. 3567-3569.
- D. S. Yurov, A. S. Alimov, B. S. Ishkanov, V. P. Sakharov, N. I. Pakhomov, and V. I. Shvedunov, “Industrial Prototype of Compact CW Linac”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper WEPSB39, pp. 248-250.
- C. K. Kuan et al., “General Design of ID Front Ends in the TPS”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4601-4603.
- G. N. Kulipanov et al., “Status of the Novosibirsk High Power Free Electron Laser”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper FRM101, pp. XX-XX.
- C. Kim et al., “Laser System of Photocathode RF Gun in Pohang Accelerator Laboratory”, in Proc. 37th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'06), Hamburg, Germany, May 2006, paper WG403, pp. XX-XX.
Back to search