Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] F. M. Velotti et al., “Observations of SPS Slow-Extracted Spill Quality Degradation and Possible Improvements”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 761-764. doi:10.18429/JACoW-IPAC2018-TUPAF035
[n] D. C. Larbalestier, “Superconducting Materials for Particle Accelerator Magnets”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3299-3304.
[n] Young-hwan Kim, Hyeok-jung Kwon, Yong-hwan Kim, Han-sung Kim, Sang-ho Kim,
Kang-ok Lee, Kie-hyung Chung,
Department of Nuclear Engineering, Seoul National University, Seoul, Korea, “Design of Radially Focused Uniform X-Ray Source”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP138, pp. 2561-2563.
[n] J. Y. Li, W. Li, G. Liu, W. Xu, and Y. Li, “Reducing HLS-II Emittance by Radiation Damping Partition Factor Exchange”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO063, pp. 2009-2011.
[n] J. H. Wang et al., “Bunch-by-Bunch Online Diagnostics at HLS”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC138, pp. 3309-3311.
[n] D. Trbojevic, D. Finley, R. Gerig, and S. Holmes, “Design Method for High Energy Accelerator Without Transition Energy”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1536-1539.
[n] A. Miura, J. Tamura, Y. Liu, and T. Miyao, “Bunch Shape Monitor Development in J-PARC Linac”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 271-273. doi:10.18429/JACoW-IPAC2017-MOPAB068
[n] C. Y. Wu, J. Chen, Y.-S. Cheng, K. T. Hsu, D. Lee, and C. Y. Liao, “Control System of EPU48 in TPS”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3180-3182. doi:10.18429/JACoW-IPAC2014-THPRO123
[n] R. Chehab et al., “Experimental Determination of The Positron Source Emittance for A Crystal Target”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper MO452, pp. 160-162.
[n] V. Baglin et al., “The Secondary Electron Yield of Technical Materials and its Variaton with Surface Treatments”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THXF102, pp. 217-221.
[n] K. Mizushima et al., “Beam Spot Measurement using a Phosphor Screen for Carbon-Ion Therapy at NIRS”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOPB78, pp. 256-258.
[n] Y. Papaphilippou and Ch. Skokos, “Non Linear Dynamics Study of the CLIC Damping Rings Using Sympletic Integrators”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP061, pp. 682-684.
[n] N. Eddy et al., “High Resolution BPM Upgrade for the ATF Damping Ring at KEK”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD11, pp. 59-61.
[n] M. Pekeler et al., “Fabrication, Test and First Operation of Superconducting Accelerator Modules for Storage Rings”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB090, pp. 1410-1412.
[n] Y. Alexahin, “Circularly Inclined Solenoid Channel for 6D Ionization Cooling of Muons”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU3PBC04, pp. 727-729.
[n] B. Henrist, V. Baglin, G. Bregliozzi, and P. Chiggiato, “The LHC Vacuum Pilot Sectors Project”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2360-2362. doi:10.18429/JACoW-IPAC2014-WEPME042
[n] L. Ceccone and V. Montabonnet, “Four Quadrant 60 A, 8 V Power Converters for LHC”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP126, pp. 3655-3657.
[n] V. Andreev et al., “Experimental Results on the Stainless Steel Prototype of a Superconducting RFQ”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP28G, pp. 1840-1842.
[n] Y. Sun, “A Compact Ring Design with Tunable Momentum Compaction”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOEPPB004, pp. 82-84.
[n] P. McIntyre, A. McInturff, and A. Sattarov, “The Tevatron Tripler -- Magnet Design and Lattice Issues”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH315, pp. 3639-3641.
[n] B. P. Xiao et al., “Cryogenic Test of Double Quarter Wave Crab Cavity for the LHC High Luminosity Upgrade”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3630-3633. doi:10.18429/JACoW-IPAC2015-WEPWI060
[n] X. Zhao et al., “Materials Analysis of CED Nb Films Being Coated on Bulk Nb Single Cell SRF Cavities”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP082, pp. 638-641.
[n] W. Wang, X. Y. He, P. Wang, S. F. Xu, and Q. Y. Yao, “The Surveying Data Processing of Control Network based on HLS Upgrade”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPME025, pp. 2986-2988.
[n] J. E. Spencer et al., “Fast Neutron Radioactivity and Damage Studies on Materials”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS066, pp. 581-583.
[n] R. N. Xu, C. L. Guo, D. M. Li, R. Li, S. Tan, and W. F. Wu, “Digital Power Supply Controller Development Based on FPGA”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA019, pp. 702-704.
[n] A. Blas, S. S. Gilardoni, and G. Sterbini, “Beam Tests and Plans for the CERN PS Transverse Damper System”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPME011, pp. 2947-2949.
[n] D. Einfeld et al., “Modelling of Gradient Bending Magnets for the Beam Dynamics Studies at ALBA”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN068, pp. 1076-1078.
[n] Y. Cai et al., “A Baseline Design for PEP-X: an Ultra-low Emittance Storage Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA074, pp. 2657-2659.
[n] Y. Alexahin, E. Gianfelice-Wendt, and W. L. Marsh, “Tune Evaluation from Phased BPM Turn-by-turn Data”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE084, pp. 1179-1181.
[n] L. Isaksson, E. Mansten, and S. Thorin, “MAX IV Online Linac Model”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4047-4049. doi:10.18429/JACoW-IPAC2017-THPAB140
[n] J. Snuverink, J. Barranco, H. Garcia, Y. I. Levinsen, D. Schulte, and R. Tomas, “CLIC Final Focus System Alignment and Magnet Tolerances”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPME051, pp. 1682-1684.
[n] Y. Irie et al., “Wideband Low-output Impedance RF System for the ISIS Second Harmonic Cavity”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC063, pp. 609-611.
[n] Y. J. Pei et al., “Status of 200 MeV Electron Linac and Its Application”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4023, pp. 442-444.
[n] J. Guo, J. D. Fox, T. Mastoridis, R. A. Rimmer, H. Wang, and S. Wang, “Transient Beam Loading and Mitigation in JLEIC Collider Rings”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 758-761. doi:10.18429/JACoW-IPAC2019-MOPRB080
[n] J. Lorkiewicz et al., “Upgrading Programme of the C-30 Cyclotron at Swierk and its User for Experimental Physics”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 542-545.
[n] G. Feng, Y. Hong, Y. J. Pei, and X. Wang, “Design of a 200keV High Pulse Current Electron Beam Facility”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN042, pp. 2811-2813.
[n] Y. M. Pischalnikov, S. Cheban, and J. C. Yun, “Design of 650 MHz Tuner for PIP-II Project”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2671-2673. doi:10.18429/JACoW-IPAC2018-WEPML002
[n] C. K. Sinclair, R. Klein, J. J. Murray, and M. Rabine, “A Polarized Photon Beam for the SLAC 82-Inch Hydrogen Bubble Chamber”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 1065-1069.
[n] S. Wang, J. Guo, R. A. Rimmer, and H. Wang, “JLEIC SRF Cavity RF Design”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2522-2524. doi:10.18429/JACoW-IPAC2016-WEPMW039
[n] A. Latina and L. Deniau, “Evolution of MAD-X in the Framework of LHC Upgrade Studies”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC074, pp. 304-306.
[n] A. K. Krasnykh, “Overview of Driver Technologies for Nanosecond TEM Kickers”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3645-3647. doi:10.18429/JACoW-IPAC2016-THPMW042
[n] P. Liu, C. Han, and F. Long, “Design of Fast Corrector Magnet Power Supply for HEPS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1294-1296. doi:10.18429/JACoW-IPAC2019-TUPMP025
[n] G.-T. Park, J. Guo, F. Marhauser, R. A. Rimmer, H. Wang, and S. Wang, “Beam Impedance Study on a Harmonic Kicker for the CCR of JLEIC”, in Proc. ERL'19, Berlin, Germany, Sep. 2019, pp. 116-119. doi:10.18429/JACoW-ERL2019-WEPNEC22
[n] S. Di Mitri, S. Spampinati, and H.-S. Kang, “Electron-Magnetic-Phase Mixing in a Linac-driven FEL to Suppress Microbunching in the Optical Regime and Below”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2894-2896. doi:10.18429/JACoW-IPAC2014-THPRO018
[n] P. F. Ma et al., “Matrix Approach to Decouple Transverse-Coupled Beams”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1144-1147. doi:10.18429/JACoW-IPAC2019-MOPTS112
[n] S. Casalbuoni, S. Gerstl, A. W. Grau, T. Holubek, and D. Saez de Jauregui, “Beam Heat Load and Pressure in the Superconducting Undulator Installed at ANKA”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPP068, pp. 717-719.
[n] G. Mueller and H. Padamsee, “High-Temperature Annealing of Superconducting Cavities Fabricated from High Purity Nioblum”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1833-1836.
[n] T. Hattori, A. Kitagawa, M. Muramatsu, and N. Hayashizaki, “Relationship of Performance and RF Resonance Modes”, in Proc. ECRIS'12, Sydney, Australia, Sep. 2012, paper WEPP02, pp. 121-124.
[n] Y. Wang et al., “Vacuum System of the Storage Ring of HLS-II”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2976-2977. doi:10.18429/JACoW-IPAC2015-WEPMN023
[n] D. Marx, R. W. Assmann, U. Dorda, B. Marchetti, and F. Mayet, “Lattice Considerations for the Use of an X-Band Transverse Deflecting Structure (TDS) at SINBAD”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 192-195. doi:10.18429/JACoW-IPAC2017-MOPAB046
[n] R. Shane, S. Cogan, S. M. Lidia, and T. Maruta, “Beam Loss in the First Segment of the FRIB Linac”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 965-967. doi:10.18429/JACoW-NAPAC2019-THZBB4
[n] J. Y. Ma and G. Huang, “Microphonics Simulation and Parameters Design of the SRF Cavities for CiADS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2903-2905. doi:10.18429/JACoW-IPAC2019-WEPRB044
[n] F. L. Krawczyk et al., “Status of the LANL Activities in the Field of RF Superconductivity”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper MOP005, pp. 46-49.
[n] C. Carli et al., “ELENA: Installations and Preparations for Commissioning”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 860-863. doi:10.18429/JACoW-IPAC2016-MOPOY009
[n] R. J. Dejus and I. Vasserman, “Phasing of Two Undulators with Different K Values at the Advanced Photon Source”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN092, pp. 1130-1132.
[n] Y. Kadi et al., “Status of the HIE-ISOLDE Project at CERN”, in Proc. HIAT'12, Chicago, IL, USA, Jun. 2012, paper WEC02, pp. 175-181.
[n] L. J. Nevay et al., “Micron-scale Laser-wire at the ATF-II at KEK Commissioning and Results”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC158, pp. 1401-1403.
[n] T. Ohata et al., “Design of an XFEL Beamline DAQ System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP017, pp. 438-440.
[n] S. Anderson et al., “First Operation of the Upgraded SLAC A-Line”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP110G, pp. 2468-2470.
[n] M. White et al., “CBXFEL design, production, and installation status”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 758-761. doi:10.18429/JACoW-LINAC2024-THPB060
[n] T. Carlisle, J. H. Cobb, and D. V. Neuffer, “Multiple Scattering Measurements in the MICE Experiment”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPD007, pp. 1419-1421.
[n] T. Kondoh et al., “Progress of the Equivalent Velocity Spectroscopy Method for Femtosecond Pulse Radiolysis by Pulse Rotation and Pulse Compression”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPR059, pp. 4109-4111.
[n] C. Hessler, E. Chevallay, S. Doebert, V. Fedosseev, I. Martini, and M. Martyanov, “Recent Results on the Performance of Cs3Sb Photocathodes in the PHIN RF-Gun”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1699-1702. doi:10.18429/JACoW-IPAC2015-TUPJE039
[n] C. Y. Liao et al., “Implementation of Machine Protection System for the Taiwan Photon Source”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3189-3191. doi:10.18429/JACoW-IPAC2014-THPRO126
[n] H. Padamsee, “Status and Issues of Superconducting RF Technology”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1691-1696.
[n] T. M. Coutinho et al., “Sardana: The Software for Building SCADAS in Scientific Environments”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEAAUST01, pp. 607-609.
[n] S. Huang, J. Zhao, C. H. Wang, G. Lei, and G. Li, “Control Prototype of Corrector Power Supply”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP99911, pp. XX-XX.
[n] T. H. Luo et al., “Beam Coupling Impedance Characterization of Third Harmonic Cavity for ALS Upgrade”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 167-169. doi:10.18429/JACoW-NAPAC2016-MOPOB47
[n] C. Y. Liao et al., “Design of Machine Protection System for the Taiwan Photon Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD046, pp. 2618-2620.
[n] J. Lorkiewicz, B. Dwersteg, A. Brinkmann, W. Moeller, D. Kostin, and M. Layalan, “Surface TiN Coating of TESLA Couplers at DESY as an Antimultipactor Remedy”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PT002, pp. 448-452.
[n] E. Chiadroni et al., “Characterization of the THz Source at SPARC”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUOARA03, pp. 1296-1298.
For LaTeX
Use Complete Form
For BibTeX
References
- F. M. Velotti et al., “Observations of SPS Slow-Extracted Spill Quality Degradation and Possible Improvements”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 761-764.
- D. C. Larbalestier, “Superconducting Materials for Particle Accelerator Magnets”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3299-3304.
- Young-hwan Kim, Hyeok-jung Kwon, Yong-hwan Kim, Han-sung Kim, Sang-ho Kim,
Kang-ok Lee, Kie-hyung Chung,
Department of Nuclear Engineering, Seoul National University, Seoul, Korea, “Design of Radially Focused Uniform X-Ray Source”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP138, pp. 2561-2563.
- J. Y. Li, W. Li, G. Liu, W. Xu, and Y. Li, “Reducing HLS-II Emittance by Radiation Damping Partition Factor Exchange”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWO063, pp. 2009-2011.
- J. H. Wang et al., “Bunch-by-Bunch Online Diagnostics at HLS”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC138, pp. 3309-3311.
- D. Trbojevic, D. Finley, R. Gerig, and S. Holmes, “Design Method for High Energy Accelerator Without Transition Energy”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1536-1539.
- A. Miura, J. Tamura, Y. Liu, and T. Miyao, “Bunch Shape Monitor Development in J-PARC Linac”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 271-273.
- C. Y. Wu, J. Chen, Y.-S. Cheng, K. T. Hsu, D. Lee, and C. Y. Liao, “Control System of EPU48 in TPS”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3180-3182.
- R. Chehab et al., “Experimental Determination of The Positron Source Emittance for A Crystal Target”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper MO452, pp. 160-162.
- V. Baglin et al., “The Secondary Electron Yield of Technical Materials and its Variaton with Surface Treatments”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THXF102, pp. 217-221.
- K. Mizushima et al., “Beam Spot Measurement using a Phosphor Screen for Carbon-Ion Therapy at NIRS”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper MOPB78, pp. 256-258.
- Y. Papaphilippou and Ch. Skokos, “Non Linear Dynamics Study of the CLIC Damping Rings Using Sympletic Integrators”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP061, pp. 682-684.
- N. Eddy et al., “High Resolution BPM Upgrade for the ATF Damping Ring at KEK”, in Proc. 10th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'11), Hamburg, Germany, May 2011, paper MOPD11, pp. 59-61.
- M. Pekeler et al., “Fabrication, Test and First Operation of Superconducting Accelerator Modules for Storage Rings”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPAB090, pp. 1410-1412.
- Y. Alexahin, “Circularly Inclined Solenoid Channel for 6D Ionization Cooling of Muons”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU3PBC04, pp. 727-729.
- B. Henrist, V. Baglin, G. Bregliozzi, and P. Chiggiato, “The LHC Vacuum Pilot Sectors Project”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2360-2362.
- L. Ceccone and V. Montabonnet, “Four Quadrant 60 A, 8 V Power Converters for LHC”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP126, pp. 3655-3657.
- V. Andreev et al., “Experimental Results on the Stainless Steel Prototype of a Superconducting RFQ”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP28G, pp. 1840-1842.
- Y. Sun, “A Compact Ring Design with Tunable Momentum Compaction”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOEPPB004, pp. 82-84.
- P. McIntyre, A. McInturff, and A. Sattarov, “The Tevatron Tripler -- Magnet Design and Lattice Issues”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH315, pp. 3639-3641.
- B. P. Xiao et al., “Cryogenic Test of Double Quarter Wave Crab Cavity for the LHC High Luminosity Upgrade”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3630-3633.
- X. Zhao et al., “Materials Analysis of CED Nb Films Being Coated on Bulk Nb Single Cell SRF Cavities”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper TUP082, pp. 638-641.
- W. Wang, X. Y. He, P. Wang, S. F. Xu, and Q. Y. Yao, “The Surveying Data Processing of Control Network based on HLS Upgrade”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPME025, pp. 2986-2988.
- J. E. Spencer et al., “Fast Neutron Radioactivity and Damage Studies on Materials”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAS066, pp. 581-583.
- R. N. Xu, C. L. Guo, D. M. Li, R. Li, S. Tan, and W. F. Wu, “Digital Power Supply Controller Development Based on FPGA”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWA019, pp. 702-704.
- A. Blas, S. S. Gilardoni, and G. Sterbini, “Beam Tests and Plans for the CERN PS Transverse Damper System”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPME011, pp. 2947-2949.
- D. Einfeld et al., “Modelling of Gradient Bending Magnets for the Beam Dynamics Studies at ALBA”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMN068, pp. 1076-1078.
- Y. Cai et al., “A Baseline Design for PEP-X: an Ultra-low Emittance Storage Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA074, pp. 2657-2659.
- Y. Alexahin, E. Gianfelice-Wendt, and W. L. Marsh, “Tune Evaluation from Phased BPM Turn-by-turn Data”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPE084, pp. 1179-1181.
- L. Isaksson, E. Mansten, and S. Thorin, “MAX IV Online Linac Model”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4047-4049.
- J. Snuverink, J. Barranco, H. Garcia, Y. I. Levinsen, D. Schulte, and R. Tomas, “CLIC Final Focus System Alignment and Magnet Tolerances”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPME051, pp. 1682-1684.
- Y. Irie et al., “Wideband Low-output Impedance RF System for the ISIS Second Harmonic Cavity”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEC063, pp. 609-611.
- Y. J. Pei et al., “Status of 200 MeV Electron Linac and Its Application”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4023, pp. 442-444.
- J. Guo, J. D. Fox, T. Mastoridis, R. A. Rimmer, H. Wang, and S. Wang, “Transient Beam Loading and Mitigation in JLEIC Collider Rings”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 758-761.
- J. Lorkiewicz et al., “Upgrading Programme of the C-30 Cyclotron at Swierk and its User for Experimental Physics”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 542-545.
- G. Feng, Y. Hong, Y. J. Pei, and X. Wang, “Design of a 200keV High Pulse Current Electron Beam Facility”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN042, pp. 2811-2813.
- Y. M. Pischalnikov, S. Cheban, and J. C. Yun, “Design of 650 MHz Tuner for PIP-II Project”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2671-2673.
- C. K. Sinclair, R. Klein, J. J. Murray, and M. Rabine, “A Polarized Photon Beam for the SLAC 82-Inch Hydrogen Bubble Chamber”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 1065-1069.
- S. Wang, J. Guo, R. A. Rimmer, and H. Wang, “JLEIC SRF Cavity RF Design”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2522-2524.
- A. Latina and L. Deniau, “Evolution of MAD-X in the Framework of LHC Upgrade Studies”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPC074, pp. 304-306.
- A. K. Krasnykh, “Overview of Driver Technologies for Nanosecond TEM Kickers”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3645-3647.
- P. Liu, C. Han, and F. Long, “Design of Fast Corrector Magnet Power Supply for HEPS”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1294-1296.
- G.-T. Park, J. Guo, F. Marhauser, R. A. Rimmer, H. Wang, and S. Wang, “Beam Impedance Study on a Harmonic Kicker for the CCR of JLEIC”, in Proc. 63rd Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'19), Berlin, Germany, Sep. 2019, pp. 116-119.
- S. Di Mitri, S. Spampinati, and H.-S. Kang, “Electron-Magnetic-Phase Mixing in a Linac-driven FEL to Suppress Microbunching in the Optical Regime and Below”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2894-2896.
- P. F. Ma et al., “Matrix Approach to Decouple Transverse-Coupled Beams”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1144-1147.
- S. Casalbuoni, S. Gerstl, A. W. Grau, T. Holubek, and D. Saez de Jauregui, “Beam Heat Load and Pressure in the Superconducting Undulator Installed at ANKA”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPP068, pp. 717-719.
- G. Mueller and H. Padamsee, “High-Temperature Annealing of Superconducting Cavities Fabricated from High Purity Nioblum”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1833-1836.
- T. Hattori, A. Kitagawa, M. Muramatsu, and N. Hayashizaki, “Relationship of Performance and RF Resonance Modes”, in Proc. 20th Int. Workshop on ECR Ion Sources (ECRIS'12), Sydney, Australia, Sep. 2012, paper WEPP02, pp. 121-124.
- Y. Wang et al., “Vacuum System of the Storage Ring of HLS-II”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2976-2977.
- D. Marx, R. W. Assmann, U. Dorda, B. Marchetti, and F. Mayet, “Lattice Considerations for the Use of an X-Band Transverse Deflecting Structure (TDS) at SINBAD”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 192-195.
- R. Shane, S. Cogan, S. M. Lidia, and T. Maruta, “Beam Loss in the First Segment of the FRIB Linac”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 965-967.
- J. Y. Ma and G. Huang, “Microphonics Simulation and Parameters Design of the SRF Cavities for CiADS”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2903-2905.
- F. L. Krawczyk et al., “Status of the LANL Activities in the Field of RF Superconductivity”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper MOP005, pp. 46-49.
- C. Carli et al., “ELENA: Installations and Preparations for Commissioning”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 860-863.
- R. J. Dejus and I. Vasserman, “Phasing of Two Undulators with Different K Values at the Advanced Photon Source”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMN092, pp. 1130-1132.
- Y. Kadi et al., “Status of the HIE-ISOLDE Project at CERN”, in Proc. 12th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'12), Chicago, IL, USA, Jun. 2012, paper WEC02, pp. 175-181.
- L. J. Nevay et al., “Micron-scale Laser-wire at the ATF-II at KEK Commissioning and Results”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC158, pp. 1401-1403.
- T. Ohata et al., “Design of an XFEL Beamline DAQ System”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP017, pp. 438-440.
- S. Anderson et al., “First Operation of the Upgraded SLAC A-Line”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP110G, pp. 2468-2470.
- M. White et al., “CBXFEL design, production, and installation status”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 758-761.
- T. Carlisle, J. H. Cobb, and D. V. Neuffer, “Multiple Scattering Measurements in the MICE Experiment”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper TUPPD007, pp. 1419-1421.
- T. Kondoh et al., “Progress of the Equivalent Velocity Spectroscopy Method for Femtosecond Pulse Radiolysis by Pulse Rotation and Pulse Compression”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPR059, pp. 4109-4111.
- C. Hessler, E. Chevallay, S. Doebert, V. Fedosseev, I. Martini, and M. Martyanov, “Recent Results on the Performance of Cs3Sb Photocathodes in the PHIN RF-Gun”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1699-1702.
- C. Y. Liao et al., “Implementation of Machine Protection System for the Taiwan Photon Source”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3189-3191.
- H. Padamsee, “Status and Issues of Superconducting RF Technology”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1691-1696.
- T. M. Coutinho et al., “Sardana: The Software for Building SCADAS in Scientific Environments”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEAAUST01, pp. 607-609.
- S. Huang, J. Zhao, C. H. Wang, G. Lei, and G. Li, “Control Prototype of Corrector Power Supply”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP99911, pp. XX-XX.
- T. H. Luo et al., “Beam Coupling Impedance Characterization of Third Harmonic Cavity for ALS Upgrade”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 167-169.
- C. Y. Liao et al., “Design of Machine Protection System for the Taiwan Photon Source”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD046, pp. 2618-2620.
- J. Lorkiewicz, B. Dwersteg, A. Brinkmann, W. Moeller, D. Kostin, and M. Layalan, “Surface TiN Coating of TESLA Couplers at DESY as an Antimultipactor Remedy”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PT002, pp. 448-452.
- E. Chiadroni et al., “Characterization of the THz Source at SPARC”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUOARA03, pp. 1296-1298.
Back to search