Favourites
For Word
[n] H. Stechemesser et al., “Design and Technical Features of the Vacuum System at COSY”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1410-1413.
[n] M. H. Foss, “A Conceptual Design for an Accelerator System for a Very High-Intensity Pulsed Neutron Source Using a Linear Induction Accelerator”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3181-3184.
[n] O. V. Singh, “60 Hz Beam Motion Reduction at NSLS UV Storage Ring”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPQ27, pp. 2729-2731.
[n] F. Loyer, F. Daudin, C. Doutressoulles, B. Ducoudret, and J. P. Rataud, “Capacitive Large-Range-Intensity Beam-Position Monitors at GANIL”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1249-1252.
[n] I. Zilberter, B. Cowan, and S. Veitzer, “High-performance magnet simulation software”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 778-781. doi:10.18429/JACoW-IPAC2024-MOPS30
[n] G. V. Stupakov, “High-Frequency Impedance of Small-Angle Collimators”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH082, pp. 1859-1861.
[n] Yu. P. Vakhrushin, M. I. Demsky, D. E. Trifonov, A. E. Baranovsky, A. P. Kuprianov, and A. A. Volzhev, “Linear Induction Accelerators for Industrial Applications”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 682-685.
[n] C. A. J. van der Geer et al., “Performance of the FELIX Accelerator”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 504-507.
[n] L. Farvacque, “Performance of the ESRF Lattice in the Presenced of Errors”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1515-1518.
[n] P. Strehl, “Thermal Aspects of Beam Intercepting Diagnostic Devices”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP034L, pp. 1630-1632.
[n] M. P. C. Pretelli et al., “Main High Voltage Solid State Gyrotron Power Supply 60kV / 80A”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper THPPH030, pp. 633-636.
[n] L. Merminga, D. R. Douglas, and G. A. Krafft, “Energy Recovering Linacs”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH302, pp. 600-604.
[n] P. Mortazavi and D. Shu, “Thermal Conductance of Metallic Interface in Vacuum”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1891-1893.
[n] C. Zannini, N. Mounet, E. M?®tral, G. Rumolo, and B. Salvant, “Electromagnetic Simulations of Simple Models of Ferrite Loaded Kickers”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD052, pp. 2045-2047.
For LaTeX
Use Complete Form
For BibTeX
References
- H. Stechemesser et al., “Design and Technical Features of the Vacuum System at COSY”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1410-1413.
- M. H. Foss, “A Conceptual Design for an Accelerator System for a Very High-Intensity Pulsed Neutron Source Using a Linear Induction Accelerator”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3181-3184.
- O. V. Singh, “60 Hz Beam Motion Reduction at NSLS UV Storage Ring”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RPQ27, pp. 2729-2731.
- F. Loyer, F. Daudin, C. Doutressoulles, B. Ducoudret, and J. P. Rataud, “Capacitive Large-Range-Intensity Beam-Position Monitors at GANIL”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1249-1252.
- I. Zilberter, B. Cowan, and S. Veitzer, “High-performance magnet simulation software”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPS30, pp. 778-781.
- G. V. Stupakov, “High-Frequency Impedance of Small-Angle Collimators”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPPH082, pp. 1859-1861.
- Yu. P. Vakhrushin, M. I. Demsky, D. E. Trifonov, A. E. Baranovsky, A. P. Kuprianov, and A. A. Volzhev, “Linear Induction Accelerators for Industrial Applications”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 682-685.
- C. A. J. van der Geer et al., “Performance of the FELIX Accelerator”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 504-507.
- L. Farvacque, “Performance of the ESRF Lattice in the Presenced of Errors”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1515-1518.
- P. Strehl, “Thermal Aspects of Beam Intercepting Diagnostic Devices”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP034L, pp. 1630-1632.
- M. P. C. Pretelli et al., “Main High Voltage Solid State Gyrotron Power Supply 60kV / 80A”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper THPPH030, pp. 633-636.
- L. Merminga, D. R. Douglas, and G. A. Krafft, “Energy Recovering Linacs”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TH302, pp. 600-604.
- P. Mortazavi and D. Shu, “Thermal Conductance of Metallic Interface in Vacuum”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1891-1893.
- C. Zannini, N. Mounet, E. M?®tral, G. Rumolo, and B. Salvant, “Electromagnetic Simulations of Simple Models of Ferrite Loaded Kickers”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPD052, pp. 2045-2047.
Back to search