Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] H. Bendfeldt-Hoppe et al., “Reconstruction of the 75 MeV Linac of the DELTA Synchrotron Radiation Facility”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP3A18, pp. 634-636.
[n] S. L. Birch and S. P. Stoneham, “10Hz Pulsed Power Converters for the ISIS Second Target Station(TS-2)”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPD004, pp. 1440-1442.
[n] L. Zhang, “Vibration of Magnet-Girder Assembly”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP043G, pp. 2176-2178.
[n] D. Horan, B. Brajuskovic, J. T. Collins, L. H. Morrison, and G. J. Waldschmidt, “352-MHz Solid-State RF Power System Development at the Advanced Photon Source”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5PFP078, pp. 1008-1010.
[n] B. Xiao, M. J. Kelley, H. L. Phillips, C. E. Reece, and T. Tajima, “RF Surface Impedance of MgB2 Thin Films at 7.5 GHz”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper THPO048, pp. 838-840.
[n] E. Ahmadi, M. Jafarzadeh, J. Rahighi, H. Ghasem, and S. M. Jazayeri, “Designing an Ultra Low Emittance Lattices for Iranian Light Source Facility Storage Ring”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2858-2860. doi:10.18429/JACoW-IPAC2016-WEPOW016
[n] R. Connolly, P. Cameron, R. Michnoff, and S. Tepikian, “Performance of the RHIC IPM”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH033, pp. 1297-1299.
[n] S. P. Fomin, N. F. Shul'ga, and S. N. Shul'ga, “Spectral-Angular Distributions of Relativistic Electrons' Radiation in a Thin Layer of Matter”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH095, pp. 2686-2688.
[n] Z. Sun et al., “Electroplating of Sn Film on Nb Substrate for Generating Nb?Sn Thin Films and Post Laser Annealing”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 51-54. doi:10.18429/JACoW-SRF2019-MOP014
[n] R. B. Fiorito, B. E. Carlsten, D. W. Feldman, R. B. Feldman, A. H. Lumpkin, and D. W. Rule, “Optical Transition Radiation Measurements of the Los Alamos Free Electron Laser Driver”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 65-68.
[n] N. Ouchi et al., “Proton Linac Activities in JAERI”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97A02, pp. 12-21.
[n] F. Trinkel and H. Soltner, “Development and Application of Rogowski Coils as Beam Position Monitors”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 223-226. doi:10.18429/JACoW-IPAC2017-MOPAB054
[n] K. Abe et al., “Water Cooling Ceramic Chamber for KEKB Kicker Magnet”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP1A15, pp. 2444-2446.
[n] F. Dupont and B. Gremont, “The 20 MeV Compact Cyclotron”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69F02, pp. XX-XX.
[n] H. Geng, Z. Guo, Z. Li, C. Meng, S. Pei, and J. Y. Tang, “Error Analysis for C-ADS MEBT2”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUPWO020, pp. 1925-1927.
[n] W. H. Backer et al., “An X-Ray Synchrotron Source for Europe, Members of the Machine Sub-Group of the ESF ad hoc Commiittee for Synchrotron Radiation”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3809-3812.
[n] X. Y. Huang et al., “An Alternative Fast Orbit Feedback Design of HEPS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1888-1890. doi:10.18429/JACoW-IPAC2018-WEPAF032
[n] A. Laisn?®, “The Orsay 200-MeV Synchro-Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper A-15, pp. 99-102.
[n] R. Akre, F. J. Decker, R. K. Jobe, R. Koontz, M. Mitchell, and R. Strozinsky, “SLC Interferometer System and Phase Distribution Upgrades”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8P023, pp. 3021-3023.
[n] Yu. P. Vakhrushin, Yu. A. Svistunov, M. F. Vorogushin, and D. V. Efremov, “The Problems of Ion Beams Modeling in Injectors and RFQ Linacs”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH429, pp. 665-667.
[n] H. Meuth, “Longitudinal Synchrotron Beam-Pulse Shapes”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 741-744.
[n] V. N. Buldakovsky et al., “Beam Injection into the Nuclotron”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P011, pp. 184-186.
[n] N. Akaoka et al., “High Intensity Proton Accelerator for Neutron Science Project at JAERI”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP07G, pp. 746-748.
[n] J. Wang, I. A. Abid, R. T. Keane, and G. S. Sprau, “Preliminary Designs and Test Results of Bipolar Power Supplies for APS Upgrade Storage Ring”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2381-2383. doi:10.18429/JACoW-IPAC2018-WEPMF008
[n] E. Wooldridge and B. D. Muratori, “Linac Focusing and Beam Break Up for 4GLS”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH040, pp. 2871-2873.
[n] V. N. Boriskin, A. N. Savchenko, and V. I. Tatanov, “Monitoring of the Electron Beam Position in Industrial Linacs”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP42, pp. 753-755.
[n] R. J. Faehl and G. Gisler, “Intense Ion Ring Acceleration in a Flux Compressing Liner”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3201-3204.
[n] Z. Zhang, F. S. Chen, and Y. F. Yang, “The Magnetic Measurement of Conventional Magnets for Free-Electron Laser Project of Chinese Academy of Engineering Physics”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1115-1117. doi:10.18429/JACoW-IPAC2016-TUPMB006
[n] A. Drees, P. Cameron, R. Michnoff, C. Montag, and M. Wilinski, “RHIC Transverse Injection Damping”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPG044, pp. 2691-2693.
[n] J. Borburgh, T. Fowler, A. Prost, T. Kramer, and T. Stadlbauer, “Design of Electrostatic Septa and Fast Deflector for MedAustron”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS048, pp. 3532-3534.
[n] C. W. Potts and D. F. Marcks, “Self-Optimizing Target Control System”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 642-648.
[n] M. Znidarcic, M. Cargnelutti, and E. Janezic, “Compact Single Pass BPM”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1013-1015. doi:10.18429/JACoW-IPAC2015-MOPTY039
[n] M. Shibata, “Neutrino Beam Line at J-PARC”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP106, pp. 3614-3616.
[n] A. A. Asseev, M. Yu. Gorin, and P. T. Pashkov, “The Efficiency Analysis of the Proton Beam Extraction from the IHEP Accelerator by a Bent Silicon Crystal”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP054G, pp. 2412-2414.
[n] R. A. Hardekopf, E. F. Higgins, and J. S. Lunsford, “Ferrite Kicker Magnet for the LAMPF Switchyard Upgrade”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3634-3637.
[n] M. J. Yang, “A Beamline Analysis Program for Main Injector Commissioning”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP30, pp. 723-725.
[n] J. Palkovic et al., “Measurements on a Gabor Lens for Neutralizing and Focusing a 30 keV Proton Beam”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-53, pp. 179-181.
[n] S. West, M. G. Glover, J. W. Gray, K. Papp, K. Pointner, and L. A. E. Van Lieshout, “The Replacement of the Isis White-circuit Choke”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP136, pp. 3679-3681.
[n] O. Brunner, A. Butterworth, G. Cavallari, N. Hilleret, J. M. Jimenez, and J. T??ckmantel, “First Experience with in situ Helium Processing of the LEP Superconducting Modules”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97A14, pp. 133-137.
[n] F. Hug and R. G. Heine, “Injector Linac Stability Requirements for High Precision Experiments at MESA”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 876-879. doi:10.18429/JACoW-IPAC2017-MOPVA014
[n] S. L. Birch, A. Nordt, and D. Paulic, “Personnel Safety Systems for the European Spallation Source”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1036-1038. doi:10.18429/JACoW-IPAC2015-MOPTY046
[n] C. Yao, B. Deriy, G. Feng, H. Shang, and J. Wang, “Upgrade of the APS Booster Synchrotron Magnet Ramp”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP190, pp. 1181-1183.
[n] C. Garc?¡a-Argos, R. Denz, S. Gabourin, C. Martin, B. Puccio, and A. P. Siemko, “Fibre Monitoring System for the Beam Permit Loops at the LHC and Future Evolution of the Beam Interlock System”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1054-1056. doi:10.18429/JACoW-IPAC2015-MOPTY054
[n] E. W. Nissen and B. Erdelyi, “An Implementation of the Fast Multipole Method for High Accuracy Particle Tracking of Intense Beams”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP157, pp. 1782-1784.
[n] J.-B. Lallement, K. Hanke, H. Hori, A. M. Lombardi, and E. Zh. Sargsyan, “Measurement strategy for the CERN Linac4 Chopper-line”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper WEBX04, pp. 262-264.
[n] L. Sanchez et al., “Design, Fabrication and Tests of the Second Prototype of the Double-Length CLIC PETS”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3887-3889. doi:10.18429/JACoW-IPAC2014-THPRI052
[n] R. C. Pardo, B. E. Clifft, P. N. Ostroumov, S. I. Sharamentov, and G. P. Zinkann, “Super-Conducting Resonator as Beam Induced Signal Pickup”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB007, pp. 2426-2428.
[n] J.-F. Ostiguy and L. Michelotti, “Mxyzptlk: An Efficient, Native C++ Differentiation Engine”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN113, pp. 3489-3491.
[n] C. I. Briegel and J. S. Diamond, “ACSys Camera Implementation Utilizing an Erlang Framework to C++ Interface”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC066, pp. 1228-1230.
[n] M. Xie, “Capillary Waveguide for Laser Acceleration in Vacuum, Gases and Plasmas”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP47C, pp. 830-834.
[n] L. W. Funk et al., “Development of a Commissioning Plan for the APT Linac”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TU4012, pp. 412-414.
[n] R. Tatchyn, “Spectral-Angular Characteristics of the LCLS in the Near and Far Fields”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper TUPP028, pp. XX-XX.
[n] M. Dach et al., “First Operational Experience with the Digital Beam Position Monitoring System for the Swiss Light Source”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP4A16, pp. 1809-1811.
[n] P. Naisson et al., “State of the Art of Niobium Machining for SRF Applications”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 210-213. doi:10.18429/JACoW-SRF2019-MOP061
[n] S. M. Hu, J. G. Ding, G.-Y. Jiang, L. R. Shen, M. H. Zhao, and S. P. Zhong, “The RF Control System of the SSRF 150MeV Linac”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMS027, pp. 1039-1040.
[n] C. Shonaka et al., “A Study of Lifetime of GaAs Photocathode for High Brightness Electron Source”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6RFP069, pp. 527-529.
[n] J. M. Bogaty, “A Noninteractive Beam Position and Size Monitor for Heavy Ions”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3349-3352.
[n] J. A. MacLachlan, J. E. Griffin, and Z. Qian, “RF Parameter Curves for a Proton Driver Synchrotron”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH321, pp. 2813-2815.
[n] M. Musardo, D. A. Harder, P. He, C. A. Kitegi, and T. Tanabe, “A New Data Acquisition Software and Analysis for Accurate Magnetic Field Integral Measurement at BNL Insertion Devices Laboratory”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WCO207, pp. 28-30.
[n] Ya. V. Shashkov, I. V. Konoplev, and N. Yu. Samarokov, “Electromagnetic Design of a Superconducting dual axis Spoke Cavity”, in Proc. ERL'19, Berlin, Germany, Sep. 2019, pp. 94-97. doi:10.18429/JACoW-ERL2019-WEPNEC14
[n] W. Scandale, R. Losito, and A. M. Taratin, “Measurement of Nuclear Reaction Rates in Crystals using the CERN-SPS North Area Test Beams”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC087, pp. 4258-4259.
[n] D. Mirarchi, G. Cavoto, R. Losito, W. Scandale, and A. M. Taratin, “Preliminary results of the crystal collimation test in UA9”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEB075, pp. 1695-1697.
[n] G. R. Murdoch, “Remote Handling in High-Power Proton Facilities”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper ROAD002, pp. 174-178.
For LaTeX
Use Complete Form
For BibTeX
References
- H. Bendfeldt-Hoppe et al., “Reconstruction of the 75 MeV Linac of the DELTA Synchrotron Radiation Facility”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP3A18, pp. 634-636.
- S. L. Birch and S. P. Stoneham, “10Hz Pulsed Power Converters for the ISIS Second Target Station(TS-2)”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPD004, pp. 1440-1442.
- L. Zhang, “Vibration of Magnet-Girder Assembly”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP043G, pp. 2176-2178.
- D. Horan, B. Brajuskovic, J. T. Collins, L. H. Morrison, and G. J. Waldschmidt, “352-MHz Solid-State RF Power System Development at the Advanced Photon Source”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5PFP078, pp. 1008-1010.
- B. Xiao, M. J. Kelley, H. L. Phillips, C. E. Reece, and T. Tajima, “RF Surface Impedance of MgB2 Thin Films at 7.5 GHz”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper THPO048, pp. 838-840.
- E. Ahmadi, M. Jafarzadeh, J. Rahighi, H. Ghasem, and S. M. Jazayeri, “Designing an Ultra Low Emittance Lattices for Iranian Light Source Facility Storage Ring”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2858-2860.
- R. Connolly, P. Cameron, R. Michnoff, and S. Tepikian, “Performance of the RHIC IPM”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH033, pp. 1297-1299.
- S. P. Fomin, N. F. Shul'ga, and S. N. Shul'ga, “Spectral-Angular Distributions of Relativistic Electrons' Radiation in a Thin Layer of Matter”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH095, pp. 2686-2688.
- Z. Sun et al., “Electroplating of Sn Film on Nb Substrate for Generating Nb?Sn Thin Films and Post Laser Annealing”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 51-54.
- R. B. Fiorito, B. E. Carlsten, D. W. Feldman, R. B. Feldman, A. H. Lumpkin, and D. W. Rule, “Optical Transition Radiation Measurements of the Los Alamos Free Electron Laser Driver”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 65-68.
- N. Ouchi et al., “Proton Linac Activities in JAERI”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97A02, pp. 12-21.
- F. Trinkel and H. Soltner, “Development and Application of Rogowski Coils as Beam Position Monitors”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 223-226.
- K. Abe et al., “Water Cooling Ceramic Chamber for KEKB Kicker Magnet”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP1A15, pp. 2444-2446.
- F. Dupont and B. Gremont, “The 20 MeV Compact Cyclotron”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69F02, pp. XX-XX.
- H. Geng, Z. Guo, Z. Li, C. Meng, S. Pei, and J. Y. Tang, “Error Analysis for C-ADS MEBT2”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper TUPWO020, pp. 1925-1927.
- W. H. Backer et al., “An X-Ray Synchrotron Source for Europe, Members of the Machine Sub-Group of the ESF ad hoc Commiittee for Synchrotron Radiation”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3809-3812.
- X. Y. Huang et al., “An Alternative Fast Orbit Feedback Design of HEPS”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1888-1890.
- A. Laisn?®, “The Orsay 200-MeV Synchro-Cyclotron”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper A-15, pp. 99-102.
- R. Akre, F. J. Decker, R. K. Jobe, R. Koontz, M. Mitchell, and R. Strozinsky, “SLC Interferometer System and Phase Distribution Upgrades”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8P023, pp. 3021-3023.
- Yu. P. Vakhrushin, Yu. A. Svistunov, M. F. Vorogushin, and D. V. Efremov, “The Problems of Ion Beams Modeling in Injectors and RFQ Linacs”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH429, pp. 665-667.
- H. Meuth, “Longitudinal Synchrotron Beam-Pulse Shapes”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 741-744.
- V. N. Buldakovsky et al., “Beam Injection into the Nuclotron”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P011, pp. 184-186.
- N. Akaoka et al., “High Intensity Proton Accelerator for Neutron Science Project at JAERI”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP07G, pp. 746-748.
- J. Wang, I. A. Abid, R. T. Keane, and G. S. Sprau, “Preliminary Designs and Test Results of Bipolar Power Supplies for APS Upgrade Storage Ring”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2381-2383.
- E. Wooldridge and B. D. Muratori, “Linac Focusing and Beam Break Up for 4GLS”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH040, pp. 2871-2873.
- V. N. Boriskin, A. N. Savchenko, and V. I. Tatanov, “Monitoring of the Electron Beam Position in Industrial Linacs”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP42, pp. 753-755.
- R. J. Faehl and G. Gisler, “Intense Ion Ring Acceleration in a Flux Compressing Liner”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 3201-3204.
- Z. Zhang, F. S. Chen, and Y. F. Yang, “The Magnetic Measurement of Conventional Magnets for Free-Electron Laser Project of Chinese Academy of Engineering Physics”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1115-1117.
- A. Drees, P. Cameron, R. Michnoff, C. Montag, and M. Wilinski, “RHIC Transverse Injection Damping”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPG044, pp. 2691-2693.
- J. Borburgh, T. Fowler, A. Prost, T. Kramer, and T. Stadlbauer, “Design of Electrostatic Septa and Fast Deflector for MedAustron”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS048, pp. 3532-3534.
- C. W. Potts and D. F. Marcks, “Self-Optimizing Target Control System”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 642-648.
- M. Znidarcic, M. Cargnelutti, and E. Janezic, “Compact Single Pass BPM”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1013-1015.
- M. Shibata, “Neutrino Beam Line at J-PARC”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP106, pp. 3614-3616.
- A. A. Asseev, M. Yu. Gorin, and P. T. Pashkov, “The Efficiency Analysis of the Proton Beam Extraction from the IHEP Accelerator by a Bent Silicon Crystal”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP054G, pp. 2412-2414.
- R. A. Hardekopf, E. F. Higgins, and J. S. Lunsford, “Ferrite Kicker Magnet for the LAMPF Switchyard Upgrade”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3634-3637.
- M. J. Yang, “A Beamline Analysis Program for Main Injector Commissioning”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP30, pp. 723-725.
- J. Palkovic et al., “Measurements on a Gabor Lens for Neutralizing and Focusing a 30 keV Proton Beam”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-53, pp. 179-181.
- S. West, M. G. Glover, J. W. Gray, K. Papp, K. Pointner, and L. A. E. Van Lieshout, “The Replacement of the Isis White-circuit Choke”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP136, pp. 3679-3681.
- O. Brunner, A. Butterworth, G. Cavallari, N. Hilleret, J. M. Jimenez, and J. T??ckmantel, “First Experience with in situ Helium Processing of the LEP Superconducting Modules”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97A14, pp. 133-137.
- F. Hug and R. G. Heine, “Injector Linac Stability Requirements for High Precision Experiments at MESA”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 876-879.
- S. L. Birch, A. Nordt, and D. Paulic, “Personnel Safety Systems for the European Spallation Source”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1036-1038.
- C. Yao, B. Deriy, G. Feng, H. Shang, and J. Wang, “Upgrade of the APS Booster Synchrotron Magnet Ramp”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP190, pp. 1181-1183.
- C. Garc?¡a-Argos, R. Denz, S. Gabourin, C. Martin, B. Puccio, and A. P. Siemko, “Fibre Monitoring System for the Beam Permit Loops at the LHC and Future Evolution of the Beam Interlock System”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1054-1056.
- E. W. Nissen and B. Erdelyi, “An Implementation of the Fast Multipole Method for High Accuracy Particle Tracking of Intense Beams”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP157, pp. 1782-1784.
- J.-B. Lallement, K. Hanke, H. Hori, A. M. Lombardi, and E. Zh. Sargsyan, “Measurement strategy for the CERN Linac4 Chopper-line”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper WEBX04, pp. 262-264.
- L. Sanchez et al., “Design, Fabrication and Tests of the Second Prototype of the Double-Length CLIC PETS”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3887-3889.
- R. C. Pardo, B. E. Clifft, P. N. Ostroumov, S. I. Sharamentov, and G. P. Zinkann, “Super-Conducting Resonator as Beam Induced Signal Pickup”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB007, pp. 2426-2428.
- J.-F. Ostiguy and L. Michelotti, “Mxyzptlk: An Efficient, Native C++ Differentiation Engine”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAN113, pp. 3489-3491.
- C. I. Briegel and J. S. Diamond, “ACSys Camera Implementation Utilizing an Erlang Framework to C++ Interface”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC066, pp. 1228-1230.
- M. Xie, “Capillary Waveguide for Laser Acceleration in Vacuum, Gases and Plasmas”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP47C, pp. 830-834.
- L. W. Funk et al., “Development of a Commissioning Plan for the APT Linac”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TU4012, pp. 412-414.
- R. Tatchyn, “Spectral-Angular Characteristics of the LCLS in the Near and Far Fields”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper TUPP028, pp. XX-XX.
- M. Dach et al., “First Operational Experience with the Digital Beam Position Monitoring System for the Swiss Light Source”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP4A16, pp. 1809-1811.
- P. Naisson et al., “State of the Art of Niobium Machining for SRF Applications”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 210-213.
- S. M. Hu, J. G. Ding, G.-Y. Jiang, L. R. Shen, M. H. Zhao, and S. P. Zhong, “The RF Control System of the SSRF 150MeV Linac”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMS027, pp. 1039-1040.
- C. Shonaka et al., “A Study of Lifetime of GaAs Photocathode for High Brightness Electron Source”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6RFP069, pp. 527-529.
- J. M. Bogaty, “A Noninteractive Beam Position and Size Monitor for Heavy Ions”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3349-3352.
- J. A. MacLachlan, J. E. Griffin, and Z. Qian, “RF Parameter Curves for a Proton Driver Synchrotron”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH321, pp. 2813-2815.
- M. Musardo, D. A. Harder, P. He, C. A. Kitegi, and T. Tanabe, “A New Data Acquisition Software and Analysis for Accurate Magnetic Field Integral Measurement at BNL Insertion Devices Laboratory”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper WCO207, pp. 28-30.
- Ya. V. Shashkov, I. V. Konoplev, and N. Yu. Samarokov, “Electromagnetic Design of a Superconducting dual axis Spoke Cavity”, in Proc. 63rd Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'19), Berlin, Germany, Sep. 2019, pp. 94-97.
- W. Scandale, R. Losito, and A. M. Taratin, “Measurement of Nuclear Reaction Rates in Crystals using the CERN-SPS North Area Test Beams”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEC087, pp. 4258-4259.
- D. Mirarchi, G. Cavoto, R. Losito, W. Scandale, and A. M. Taratin, “Preliminary results of the crystal collimation test in UA9”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEB075, pp. 1695-1697.
- G. R. Murdoch, “Remote Handling in High-Power Proton Facilities”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper ROAD002, pp. 174-178.
Back to search