Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. R. Calvey et al., “CesrTA Retarding Field Analyzer Measurements in Drifts, Dipoles, Quadrupoles and Wigglers”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD023, pp. 1973-1975.
[n] J. Conrad et al., “The Power and Polarisation Upgrade Project at the S-DALINAC Injector”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper TUP007, pp. 398-400.
[n] M. Scholz, B. Faatz, M. Vogt, and J. Zemella, “Optics Measurements at FLASH2”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP073, pp. 902-904.
[n] N. F. Petry, K. K??mpel, S. Lamprecht, O. Meusel, H. Podlech, and M. Schwarz, “Cavity R&D for HBS Accelerator”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1520-1522. doi:10.18429/JACoW-IPAC2022-TUPOMS042
[n] M. Tanaka, E. J. Bleser, J. W. Glenn, Y. Y. Lee, and A. Soukas, “The AGS Accelerator Complex with the New Fast Extraction System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAR13, pp. 1930-1932.
[n] C.-Y. Liu, Y.-C. Chien, J.-P. Chiou, C.-S. Fann, and J.-T. Sheu, “Design and Implementation of the High Performance Thyratron Tube Driver”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPLE070, pp. 2646-2648.
[n] F. Amand, M. Pavleski, M. Plesko, and L. Fernandez, “GUI Style Guide for Control System Applications at ESS”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1047-1048. doi:10.18429/JACoW-ICALEPCS2015-WEPGF146
[n] K. N. Sjobak, A. Grudiev, and E. Adli, “New Criterion for Shape Optimization of Normal-Conducting Accelerator Cells for High-Gradient Applications”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP028, pp. 114-116.
[n] E. Gjonaj and D. Bazyl, “Beam dynamics study of a CW L-band SRF gun for the high duty cycle EuXFEL”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2781-2784. doi:10.18429/JACoW-IPAC2023-WEPA054
[n] D. Malyutin and A. N. Matveenko, “Electron Beam Probe Diagnostic for BESSY II Storage Ring”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 179-182. doi:10.18429/JACoW-IBIC2016-MOPG53
[n] S. Igarashi et al., “Beam Profile Measurement using Flying Wire Monitors at the J-PARC Main Ring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC098, pp. 1239-1241.
[n] M. Schuett, C. M. Kleffner, K. Knie, and U. Ratzinger, “The 325 MHz FAIR pLinac Ladder RFQ - Final Assembly for Commissioning”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 82-85. doi:10.18429/JACoW-IPAC2022-MOPOST014
[n] M. Cavenago, T. Kulevoy, V. Stolbunov, and A. Vassiliev, “Installation and Operation of an ECR Ion Source and its Platform in Legnaro”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP035L, pp. 1487-1489.
[n] F. Q. Zhang, T. Adachi, H. Someya, and H. Sato, “Phase Synchronization of Multi-Network System for Resonant Excitation of the JHF 3-GeV Booster Magnets”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA158, pp. 3752-3754.
[n] S. A. Kahn et al., “Integrating the MANX 6-D Muon Cooling Experiment with the MICE Spectrometers”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP095, pp. 2727-2729.
[n] R. Petkus, “Control System Network Architecture at NSLS-II”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP007, pp. XX-XX.
[n] Yu-Seok Kim, “DESIGN OF KIRAMS-13 CYCLOTRON CONTROL SYSTEM”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 18P13, pp. XX-XX.
[n] T. Ohshima, N. Hosoda, H. Maesaka, S. Matsubara, Y. Otake, and M. Yamaga, “Correction of Phase and Amplitude Error of RF Modulator and Demodulator”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP023, pp. 453-455.
[n] J. F. O, M. J. Borden, D. C. Bruhn, J. L. Erickson, J. D. Gilpatrick, and S. S. Kurennoy, “LANSCE Prototype Beam Position and Phase Monitor (BPPM) Mechanical Design”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS055, pp. 4123-4125.
[n] H. S. Kang et al., “Beam Acceleration Results of Test Linac”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 6D028, pp. 743-745.
[n] V. Gostishchev et al., “Internal Target Effects in the ESR Storage Ring with Cooling”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH075, pp. 202-204.
[n] C. Yao, E. E. Cherbak, N. P. Di Monte, A. Grelick, T. Smith, and B. X. Yang, “Beam Loading Measurement and its Application to the Harmonic RF Control of the APS PAR”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS111, pp. 3538-3540.
[n] Z. Huang, Y. Chen, and S. Fu, “Emittance Growth Caused by Bunched Beam with Nonuniform Distributions in Both Longitudinal and Transverse Directions in Linac”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAQ26, pp. 3346-3348.
[n] U. Ratzinger, A. Bechtold, B. Schlitt, and A. Schempp, “Design of the 7 MeV/u, 217 MHz Injector Linac for the Proposed Ion Beam Facility for Cancer Therapy at the Clinic in Heidelberg”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper MOD10, pp. 226-228.
[n] Z. H. Bai et al., “A Modified Hybrid 6BA Lattice for the HALF Storage Ring”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 407-409. doi:10.18429/JACoW-IPAC2021-MOPAB112
[n] A. Vannozzi et al., “Sector DC Dipoles Design for the Beam Test Facility Upgrade”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3634-3637. doi:10.18429/JACoW-IPAC2018-THPAL010
[n] F. Giacuzzo and J. Miertusova, “Pumping and Pressure Measuring System for the Linac of the ELETTRA Synchrotron Light Source”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP081L, pp. 2524-2526.
[n] L. Ficcadenti and J. Tuckmantel, “Slim Elliptical Cavity at 800 MHz for Local Crab Crossing”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPC028, pp. 2263-2265.
[n] M. H. Almalki, P. Forck, T. Sieber, and R. Singh, “Simulation of Bunch Length and Velocity Dependence of Button BPMs for Linacs Using CST Particle Studio?«”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 319-321. doi:10.18429/JACoW-IBIC2016-TUPG05
[n] M. W. Bruker, K. Aulenbacher, J. Dietrich, A. Hofmann, and T. Weilbach, “Secondary Electron Measurements at the HIM Electron Cooler Test Set-Up”, in Proc. COOL'15, Newport News, VA, USA, Sep.-Oct. 2015, paper MOPF08, pp. 48-50.
[n] G. W. Foster, “An 8 GeV Superconducting Injector Linac”, presented at the PAC'05, Knoxville, TN, USA, May 2005, paper MOPB001, unpublished.
[n] J. D. Sherman et al., “Development and Test Results of the Low-Energy Demonstration Accelerator LEDA Proton Injector on a 1.25 MeV CW Radio Frequency Quadrupole”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4054, pp. 890-892.
[n] T. Saeki et al., “Fabrication of 3.0-GHz Single-cell Cavities for Thin-film Study”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 177-181. doi:10.18429/JACoW-SRF2019-MOP054
[n] F. Loehl et al., “Status of the SwissFEL C-band Linear Accelerator”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUPSO43, pp. 317-321.
[n] H. S. Kim, Y.-S. Cho, and H.-J. Kwon, “Vertical Test of PEFP Prototype SRF Cavity”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC101, pp. 307-309.
[n] Y. B. Yan, Y. B. Leng, L. Y. Yu, and W. M. Zhou, “SSRF BPM System Optimization and Upgrade”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUPA11, pp. 355-357.
[n] M. Sato et al., “Commissioning Status of the iBNCT Accelerator”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 164-166. doi:10.18429/JACoW-LINAC2022-MOPOGE09
[n] S. Ohsawa et al., “Progress of Electron Gun Systems for the e-/e+ Linac at KEK”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-50, pp. 434-436.
[n] Z.-D. Tsai, W. S. Chan, and C. K. Kuan, “Design of the De-ionized Water Treatment for Taiwan Photon Source”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS065, pp. 1686-1688.
[n] Barill?¿re R., Baggiolini V., Beharell M., Chmielewski D., Gras P., Komoutnikov V., Kostro K., Liiou A., Milcent H., “Results of the OPC Evaluation Done within JCOP for the Control of the LHC Experiments”, in Proc. ICALEPCS'99, Trieste, Italy, Oct. 1999, paper MC1P43, pp. XX-XX.
[n] C. Belver-Aguilar, A. Faus-Golfe, M. J. Barnes, H. A. Day, and F. Toral, “Measurements and Laboratory Tests on a Prototype Stripline Kicker for the CLIC Damping Rings”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 125-127. doi:10.18429/JACoW-IPAC2014-MOPRO027
[n] W. Liu, B. Du, G. Huang, L. Lin, L. Shang, and W. B. Song, “Development of 1.3 GHz Cavity Combiner for 24 kW CW SSA”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4020-4022. doi:10.18429/JACoW-IPAC2017-THPAB127
[n] N. Hubert et al., “SOLEIL Beam Orbit Stability Improvements”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC068, pp. 1156-1158.
[n] T. Torims et al., “Development of a Hybrid Electron Accelerator System for the Treatment of Marine Diesel Exhaust Gases”, in Proc. IPAC'20, Caen, France, May 2020, pp. 80. doi:10.18429/JACoW-IPAC2020-THVIR14
[n] J. P. Edelen, S. Biedron, J. R. Harris, S. V. Milton, and J. W. Lewellen, “An Improved Analytic Model of Electron Back-Bombardment in Thermionic Cathode RF Guns”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1872-1874. doi:10.18429/JACoW-IPAC2015-TUPMA018
[n] H. Imao et al., “R&D of Helium Gas Stripper for Intense Uranium Beams”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper TU3PB03, pp. 265-268.
[n] C. H. Huang et al., “Beam Motion and Photon Flux Dips during Injection at the Taiwan Photon Source”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1848-1850. doi:10.18429/JACoW-IPAC2019-TUPRB081
[n] P. Emma et al., “Linear Accelerator Design for the LCLS-II FEL Facility”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP025, pp. 743-747.
[n] K. C. Harkay, “Observation and Modeling of Electron Cloud Instability”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEXFI02, pp. 1887-1891.
[n] M. Sj?Âstr?Âm, M. Eriksson, L.-J. Lindgren, and E. J. Wall?®n, “Corrector Based Determination of Quadrupole Centres”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC119, pp. 1347-1349.
[n] D. I. Kim, Y.-S. Cho, H. S. Kim, H.-J. Kwon, and K. T. Seol, “Performance Study of the PEFP Microwave Ion Source with Modified Microwave System”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPD045, pp. 463-465.
For LaTeX
Use Complete Form
For BibTeX
References
- J. R. Calvey et al., “CesrTA Retarding Field Analyzer Measurements in Drifts, Dipoles, Quadrupoles and Wigglers”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPD023, pp. 1973-1975.
- J. Conrad et al., “The Power and Polarisation Upgrade Project at the S-DALINAC Injector”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper TUP007, pp. 398-400.
- M. Scholz, B. Faatz, M. Vogt, and J. Zemella, “Optics Measurements at FLASH2”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper THP073, pp. 902-904.
- N. F. Petry, K. K??mpel, S. Lamprecht, O. Meusel, H. Podlech, and M. Schwarz, “Cavity R&D for HBS Accelerator”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1520-1522.
- M. Tanaka, E. J. Bleser, J. W. Glenn, Y. Y. Lee, and A. Soukas, “The AGS Accelerator Complex with the New Fast Extraction System”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAR13, pp. 1930-1932.
- C.-Y. Liu, Y.-C. Chien, J.-P. Chiou, C.-S. Fann, and J.-T. Sheu, “Design and Implementation of the High Performance Thyratron Tube Driver”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPLE070, pp. 2646-2648.
- F. Amand, M. Pavleski, M. Plesko, and L. Fernandez, “GUI Style Guide for Control System Applications at ESS”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 1047-1048.
- K. N. Sjobak, A. Grudiev, and E. Adli, “New Criterion for Shape Optimization of Normal-Conducting Accelerator Cells for High-Gradient Applications”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP028, pp. 114-116.
- E. Gjonaj and D. Bazyl, “Beam dynamics study of a CW L-band SRF gun for the high duty cycle EuXFEL”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA054, pp. 2781-2784.
- D. Malyutin and A. N. Matveenko, “Electron Beam Probe Diagnostic for BESSY II Storage Ring”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 179-182.
- S. Igarashi et al., “Beam Profile Measurement using Flying Wire Monitors at the J-PARC Main Ring”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC098, pp. 1239-1241.
- M. Schuett, C. M. Kleffner, K. Knie, and U. Ratzinger, “The 325 MHz FAIR pLinac Ladder RFQ - Final Assembly for Commissioning”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 82-85.
- M. Cavenago, T. Kulevoy, V. Stolbunov, and A. Vassiliev, “Installation and Operation of an ECR Ion Source and its Platform in Legnaro”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP035L, pp. 1487-1489.
- F. Q. Zhang, T. Adachi, H. Someya, and H. Sato, “Phase Synchronization of Multi-Network System for Resonant Excitation of the JHF 3-GeV Booster Magnets”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA158, pp. 3752-3754.
- S. A. Kahn et al., “Integrating the MANX 6-D Muon Cooling Experiment with the MICE Spectrometers”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP095, pp. 2727-2729.
- R. Petkus, “Control System Network Architecture at NSLS-II”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP007, pp. XX-XX.
- Yu-Seok Kim, “DESIGN OF KIRAMS-13 CYCLOTRON CONTROL SYSTEM”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 18P13, pp. XX-XX.
- T. Ohshima, N. Hosoda, H. Maesaka, S. Matsubara, Y. Otake, and M. Yamaga, “Correction of Phase and Amplitude Error of RF Modulator and Demodulator”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP023, pp. 453-455.
- J. F. O, M. J. Borden, D. C. Bruhn, J. L. Erickson, J. D. Gilpatrick, and S. S. Kurennoy, “LANSCE Prototype Beam Position and Phase Monitor (BPPM) Mechanical Design”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS055, pp. 4123-4125.
- H. S. Kang et al., “Beam Acceleration Results of Test Linac”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 6D028, pp. 743-745.
- V. Gostishchev et al., “Internal Target Effects in the ESR Storage Ring with Cooling”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH075, pp. 202-204.
- C. Yao, E. E. Cherbak, N. P. Di Monte, A. Grelick, T. Smith, and B. X. Yang, “Beam Loading Measurement and its Application to the Harmonic RF Control of the APS PAR”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS111, pp. 3538-3540.
- Z. Huang, Y. Chen, and S. Fu, “Emittance Growth Caused by Bunched Beam with Nonuniform Distributions in Both Longitudinal and Transverse Directions in Linac”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAQ26, pp. 3346-3348.
- U. Ratzinger, A. Bechtold, B. Schlitt, and A. Schempp, “Design of the 7 MeV/u, 217 MHz Injector Linac for the Proposed Ion Beam Facility for Cancer Therapy at the Clinic in Heidelberg”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper MOD10, pp. 226-228.
- Z. H. Bai et al., “A Modified Hybrid 6BA Lattice for the HALF Storage Ring”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 407-409.
- A. Vannozzi et al., “Sector DC Dipoles Design for the Beam Test Facility Upgrade”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3634-3637.
- F. Giacuzzo and J. Miertusova, “Pumping and Pressure Measuring System for the Linac of the ELETTRA Synchrotron Light Source”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP081L, pp. 2524-2526.
- L. Ficcadenti and J. Tuckmantel, “Slim Elliptical Cavity at 800 MHz for Local Crab Crossing”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPC028, pp. 2263-2265.
- M. H. Almalki, P. Forck, T. Sieber, and R. Singh, “Simulation of Bunch Length and Velocity Dependence of Button BPMs for Linacs Using CST Particle Studio?«”, in Proc. 5th Int. Beam Instrumentation Conf. (IBIC'16), Barcelona, Spain, Sep. 2016, pp. 319-321.
- M. W. Bruker, K. Aulenbacher, J. Dietrich, A. Hofmann, and T. Weilbach, “Secondary Electron Measurements at the HIM Electron Cooler Test Set-Up”, in Proc. 10th Workshop on Beam Cooling and Related Topics (COOL'15), Newport News, VA, USA, Sep.-Oct. 2015, paper MOPF08, pp. 48-50.
- G. W. Foster, “An 8 GeV Superconducting Injector Linac”, presented at the 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper MOPB001, unpublished.
- J. D. Sherman et al., “Development and Test Results of the Low-Energy Demonstration Accelerator LEDA Proton Injector on a 1.25 MeV CW Radio Frequency Quadrupole”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4054, pp. 890-892.
- T. Saeki et al., “Fabrication of 3.0-GHz Single-cell Cavities for Thin-film Study”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 177-181.
- F. Loehl et al., “Status of the SwissFEL C-band Linear Accelerator”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper TUPSO43, pp. 317-321.
- H. S. Kim, Y.-S. Cho, and H.-J. Kwon, “Vertical Test of PEFP Prototype SRF Cavity”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC101, pp. 307-309.
- Y. B. Yan, Y. B. Leng, L. Y. Yu, and W. M. Zhou, “SSRF BPM System Optimization and Upgrade”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper TUPA11, pp. 355-357.
- M. Sato et al., “Commissioning Status of the iBNCT Accelerator”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 164-166.
- S. Ohsawa et al., “Progress of Electron Gun Systems for the e-/e+ Linac at KEK”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper WE3-50, pp. 434-436.
- Z.-D. Tsai, W. S. Chan, and C. K. Kuan, “Design of the De-ionized Water Treatment for Taiwan Photon Source”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS065, pp. 1686-1688.
- Barill?¿re R., Baggiolini V., Beharell M., Chmielewski D., Gras P., Komoutnikov V., Kostro K., Liiou A., Milcent H., “Results of the OPC Evaluation Done within JCOP for the Control of the LHC Experiments”, in Proc. 7th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'99), Trieste, Italy, Oct. 1999, paper MC1P43, pp. XX-XX.
- C. Belver-Aguilar, A. Faus-Golfe, M. J. Barnes, H. A. Day, and F. Toral, “Measurements and Laboratory Tests on a Prototype Stripline Kicker for the CLIC Damping Rings”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 125-127.
- W. Liu, B. Du, G. Huang, L. Lin, L. Shang, and W. B. Song, “Development of 1.3 GHz Cavity Combiner for 24 kW CW SSA”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4020-4022.
- N. Hubert et al., “SOLEIL Beam Orbit Stability Improvements”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC068, pp. 1156-1158.
- T. Torims et al., “Development of a Hybrid Electron Accelerator System for the Treatment of Marine Diesel Exhaust Gases”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, pp. 80.
- J. P. Edelen, S. Biedron, J. R. Harris, S. V. Milton, and J. W. Lewellen, “An Improved Analytic Model of Electron Back-Bombardment in Thermionic Cathode RF Guns”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1872-1874.
- H. Imao et al., “R&D of Helium Gas Stripper for Intense Uranium Beams”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper TU3PB03, pp. 265-268.
- C. H. Huang et al., “Beam Motion and Photon Flux Dips during Injection at the Taiwan Photon Source”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1848-1850.
- P. Emma et al., “Linear Accelerator Design for the LCLS-II FEL Facility”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper THP025, pp. 743-747.
- K. C. Harkay, “Observation and Modeling of Electron Cloud Instability”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEXFI02, pp. 1887-1891.
- M. Sj?Âstr?Âm, M. Eriksson, L.-J. Lindgren, and E. J. Wall?®n, “Corrector Based Determination of Quadrupole Centres”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC119, pp. 1347-1349.
- D. I. Kim, Y.-S. Cho, H. S. Kim, H.-J. Kwon, and K. T. Seol, “Performance Study of the PEFP Microwave Ion Source with Modified Microwave System”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPD045, pp. 463-465.
Back to search