Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Giovannozzi, “DESIGN AND TESTS OF A LOW-LOSS MULTI-TURN EJECTION FOR THE CERN PS”, in Proc. HB'06, Tsukuba, Japan, May-Jun. 2006, paper WEAZ03, pp. 192-196.
[n] E. Allaria, G. De Ninno, and W. M. Fawley, “The Second Stage of FERMI@Elettra: A Seeded FEL in the Soft X-ray Spectral Range”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper WEPC53, pp. 631-634.
[n] H. Kim, “Regenerative Beam Extraction”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper B-002, pp. XX-XX.
[n] H. Wu et al., “Control System Integration of the PETRA III BPM System based on Libera Brilliance”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper WEP073, pp. 543-545.
[n] J. A. Casey, F. O. Arntz, M. P. J. Gaudreau, M. K. Kempkes, and I. Roth, “Marx Bank Technology for Accelerators and Colliders”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPD008, pp. 1449-1451.
[n] L. J. Kibbe, J. A. Jungerman, and N. F. Peek, “Central Region Studies for Incorporating an Axial Ion Source in the Davis 76 - Inch Cyclotron”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper A-003, pp. XX-XX.
[n] S. Veseli, “PvaPy: Python API for EPICS PV Access”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 970-973. doi:10.18429/JACoW-ICALEPCS2015-WEPGF116
[n] O. Napoly, “Highlights from the TESLA Technical Design Proposal”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WOPA007, pp. 402-406.
[n] R. Wegner, W. Wuensch, G. Burt, and B. J. Woolley, “Bead-Pull Measurement Method and Tuning of a Prototype CLIC Crab Cavity”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP035, pp. 134-136.
[n] R. Brinkmann, “Technology and Challenges of Linear Colliders”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOBC2, pp. 16-20.
[n] F. Sannibale, D. Baum, K. Holldack, N. Kelez, and T. Scarvie, “A Second Beam-Diagnostic Beamline for the Advanced Light Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB051, pp. 2527-2529.
[n] R. Brinkmann, “Linear Collider Projects at DESY”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOZ01A, pp. 53-57.
[n] Y. Luo, W. Fischer, N. Malitsky, S. Tepikian, and D. Trbojevic, “Online Nonlinear Chromaticity Correction Using Off-Momentum Tune Response Matrix”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS110, pp. 4357-4359.
[n] A. P. Shishlo, “Model and Beam Based Setup Procedures for a High Power Hadron Superconducting Linac”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOIOC03, pp. 41-45.
[n] B. Keil et al., “Design Status of the European X-FEL Tranverse Intra Bunch Train Feedback”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOPA35, pp. 133-137.
[n] W. Decking and H. Nishimura, “Interactive and Programmable Environment for Accelerator Modeling And Simulation”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP22C, pp. 1224-1226.
[n] T. Shintake, “C-Band Main Linac RF System for e+e- Linear Collider of 0.5 to 1.0 TeV C.M. Energy”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP50, pp. 184-186.
[n] A. Novokhatski and S. Weathersby, “RF Modes in the PEP-II Shielded Vertex Bellows”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAG044, pp. 2981-2983.
[n] W. Wittmer, A. S. Fisher, D. J. Martin, and J. J. Sebek, “Detection of Instumental Drifts in the PEP II LER BPM System”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper FRPMS084, pp. 4261-4263.
[n] D. W. Storey, R. E. Laxdal, L. Merminga, B. S. Waraich, Z. Y. Yao, and V. Zvyagintsev, “A Superconducting RF Deflecting Cavity for the ARIEL e-Linac Separator”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB044, pp. 1187-1190.
[n] Y. Li, Z. P. Li, S. Wang, and J. Peng, “CSNS Linac Beam Commissioning Tools and Experience”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 750-752. doi:10.18429/JACoW-LINAC2018-THPO032
[n] A. C. Kabel and Y. Cai, “A Multi-bunch, Three-dimensional, Strong-strong Beam-beam Simulation Code for Parallel Computers”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF082, pp. 509-511.
[n] I. Irfan, S. F. Chapman, M. Krishnan, K. M. Velas, and W. Kaabi, “Energetic Copper Coating on Stainless Steel Power Couplers for SRF Application”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB083, pp. 1330-1334.
[n] Y. T. Yan, Y. Cai, W. S. Colocho, and F.-J. Decker, “Validation of PEP-II Resonantly Excited Turn-by-Turn BPM Data”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS070, pp. 3645-3647.
[n] I. Syratchev and A. Cappelletti, “A New High-power RF Device to Vary the Output Power of CLIC Power Extraction and Transfer Structures (PETS)”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE026, pp. 3407-3409.
[n] Yu. P. Vakhrushin, V. M. Nikolaev, A. V. Rjabtsov, V. L. Smirnov, and D. V. Efremov, “Use of High Dispersion Accelerating Waveguides in Linear Electron Accelerators”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper TUP0031, pp. 174-176.
[n] E. Prebys, “Proton Beam Inter-Bunch Extinction and Extinction Monitoring for the Mu2e Experiment”, in Proc. HB'12, Beijing, China, Sep. 2012, paper THO3B01, pp. 532-535.
[n] B. Yildirim, E. M. Apostolov, S. Choroba, V. V. Katalev, P. Morozov, and Y. Nachtigal, “RF Power Waveguide Distribution for the RF Gun of the European XFEL at DESY”, in Proc. FEL'19, Hamburg, Germany, Aug. 2019, pp. 434-436. doi:10.18429/JACoW-FEL2019-WEP049
[n] V. M. Pavlov, “Operation Features of VEPP-5 Preinjector RF-Buncher with”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper MO439, pp. 127-129.
[n] Q. T. Zhao, J. C. Yang, Z. M. Zhang, and H. W. Zhao, “Preliminary Investigations and Pre-Research Scheme of High Average Current Electron Injectors at IMP”, in Proc. ERL'19, Berlin, Germany, Sep. 2019, pp. 90-93. doi:10.18429/JACoW-ERL2019-WEPNEC13
[n] I. Roth, N. Butler, M. P. J. Gaudreau, M. K. Kempkes, and R. E. Simpson, “Thyratron Replacement”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2512-2514. doi:10.18429/JACoW-IPAC2018-WEPMF063
[n] O. A. Kovalenko et al., “Ion Optics of the HESR Storage Ring at FAIR for Operation with Heavy Ions”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1117-1119. doi:10.18429/JACoW-IPAC2014-TUPRO042
[n] F. Furuta, K. Saito, and H. Yamaoka, “Different Materials Bonding by HIP Technology and the Reliability”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper TUP60, pp. 383-383.
[n] J.-L. Fernandez-Hernando, D. Angal-Kalinin, R. Losito, and V. Vlachoudis, “Initial Studies and a Review of Options for a Collimator System for the Linac4 Accelerator”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP037, pp. 2872-2874.
[n] F. Ghasemi, F. AbbasiDavani, S. Ahmadiannamini, M. Shafiee, M. L. Lamehi Rashti, and H. Shaker, “Construction of Disk-loaded Buncher for S-Band Low Energy TW Electron Linear Accelerator”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD063, pp. 2666-2668.
[n] J. Rahighi, “Proposal for a 3rd Generation National Iranian Synchrotron Light Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA023, pp. 2532-2534.
[n] H. H?ñhnel, U. Ratzinger, and R. Tiede, “Proposal of a Conventional Matching Section as an Alternative to the Existing HSI MEBT Superlens at GSI UNILAC”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP062, pp. 196-198.
[n] M. Gaowei et al., “High Current Performance of Alkali Antimonide Photocathode in LEReC DC Gun”, in Proc. ERL'19, Berlin, Germany, Sep. 2019, pp. 61-64. doi:10.18429/JACoW-ERL2019-WECOXBS02
[n] A. Pisent, “Towards Commissioning of the IFMIF RFQ”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 698-703. doi:10.18429/JACoW-LINAC2016-TH1A05
[n] D. G. Maxwell, Z. Q. He, and G. Shen, “FRIB Lattice-Model Service for Commissioning and Operation”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 90-92. doi:10.18429/JACoW-LINAC2016-MOPRC011
[n] A. Mizuno and H. Hanaki, “Semi-3D Beam-Tracking Code for Electron Injectors Using Bulk-to-Point Calculation Technique for Space Charge Fields”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 120-122. doi:10.18429/JACoW-LINAC2016-MOPRC023
[n] M. A. Palmer et al., “Electron Cloud at Low Emittance in CesrTA”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUYMH02, pp. 1251-1255.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Giovannozzi, “DESIGN AND TESTS OF A LOW-LOSS MULTI-TURN EJECTION FOR THE CERN PS”, in Proc. 39th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'06), Tsukuba, Japan, May-Jun. 2006, paper WEAZ03, pp. 192-196.
- E. Allaria, G. De Ninno, and W. M. Fawley, “The Second Stage of FERMI@Elettra: A Seeded FEL in the Soft X-ray Spectral Range”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper WEPC53, pp. 631-634.
- H. Kim, “Regenerative Beam Extraction”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper B-002, pp. XX-XX.
- H. Wu et al., “Control System Integration of the PETRA III BPM System based on Libera Brilliance”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper WEP073, pp. 543-545.
- J. A. Casey, F. O. Arntz, M. P. J. Gaudreau, M. K. Kempkes, and I. Roth, “Marx Bank Technology for Accelerators and Colliders”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPD008, pp. 1449-1451.
- L. J. Kibbe, J. A. Jungerman, and N. F. Peek, “Central Region Studies for Incorporating an Axial Ion Source in the Davis 76 - Inch Cyclotron”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper A-003, pp. XX-XX.
- S. Veseli, “PvaPy: Python API for EPICS PV Access”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 970-973.
- O. Napoly, “Highlights from the TESLA Technical Design Proposal”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WOPA007, pp. 402-406.
- R. Wegner, W. Wuensch, G. Burt, and B. J. Woolley, “Bead-Pull Measurement Method and Tuning of a Prototype CLIC Crab Cavity”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP035, pp. 134-136.
- R. Brinkmann, “Technology and Challenges of Linear Colliders”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOBC2, pp. 16-20.
- F. Sannibale, D. Baum, K. Holldack, N. Kelez, and T. Scarvie, “A Second Beam-Diagnostic Beamline for the Advanced Light Source”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPB051, pp. 2527-2529.
- R. Brinkmann, “Linear Collider Projects at DESY”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOZ01A, pp. 53-57.
- Y. Luo, W. Fischer, N. Malitsky, S. Tepikian, and D. Trbojevic, “Online Nonlinear Chromaticity Correction Using Off-Momentum Tune Response Matrix”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS110, pp. 4357-4359.
- A. P. Shishlo, “Model and Beam Based Setup Procedures for a High Power Hadron Superconducting Linac”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOIOC03, pp. 41-45.
- B. Keil et al., “Design Status of the European X-FEL Tranverse Intra Bunch Train Feedback”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper MOPA35, pp. 133-137.
- W. Decking and H. Nishimura, “Interactive and Programmable Environment for Accelerator Modeling And Simulation”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP22C, pp. 1224-1226.
- T. Shintake, “C-Band Main Linac RF System for e+e- Linear Collider of 0.5 to 1.0 TeV C.M. Energy”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper MOP50, pp. 184-186.
- A. Novokhatski and S. Weathersby, “RF Modes in the PEP-II Shielded Vertex Bellows”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAG044, pp. 2981-2983.
- W. Wittmer, A. S. Fisher, D. J. Martin, and J. J. Sebek, “Detection of Instumental Drifts in the PEP II LER BPM System”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper FRPMS084, pp. 4261-4263.
- D. W. Storey, R. E. Laxdal, L. Merminga, B. S. Waraich, Z. Y. Yao, and V. Zvyagintsev, “A Superconducting RF Deflecting Cavity for the ARIEL e-Linac Separator”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB044, pp. 1187-1190.
- Y. Li, Z. P. Li, S. Wang, and J. Peng, “CSNS Linac Beam Commissioning Tools and Experience”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 750-752.
- A. C. Kabel and Y. Cai, “A Multi-bunch, Three-dimensional, Strong-strong Beam-beam Simulation Code for Parallel Computers”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF082, pp. 509-511.
- I. Irfan, S. F. Chapman, M. Krishnan, K. M. Velas, and W. Kaabi, “Energetic Copper Coating on Stainless Steel Power Couplers for SRF Application”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB083, pp. 1330-1334.
- Y. T. Yan, Y. Cai, W. S. Colocho, and F.-J. Decker, “Validation of PEP-II Resonantly Excited Turn-by-Turn BPM Data”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAS070, pp. 3645-3647.
- I. Syratchev and A. Cappelletti, “A New High-power RF Device to Vary the Output Power of CLIC Power Extraction and Transfer Structures (PETS)”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE026, pp. 3407-3409.
- Yu. P. Vakhrushin, V. M. Nikolaev, A. V. Rjabtsov, V. L. Smirnov, and D. V. Efremov, “Use of High Dispersion Accelerating Waveguides in Linear Electron Accelerators”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper TUP0031, pp. 174-176.
- E. Prebys, “Proton Beam Inter-Bunch Extinction and Extinction Monitoring for the Mu2e Experiment”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper THO3B01, pp. 532-535.
- B. Yildirim, E. M. Apostolov, S. Choroba, V. V. Katalev, P. Morozov, and Y. Nachtigal, “RF Power Waveguide Distribution for the RF Gun of the European XFEL at DESY”, in Proc. 39th Int. Free Electron Laser Conf. (FEL'19), Hamburg, Germany, Aug. 2019, pp. 434-436.
- V. M. Pavlov, “Operation Features of VEPP-5 Preinjector RF-Buncher with”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper MO439, pp. 127-129.
- Q. T. Zhao, J. C. Yang, Z. M. Zhang, and H. W. Zhao, “Preliminary Investigations and Pre-Research Scheme of High Average Current Electron Injectors at IMP”, in Proc. 63rd Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'19), Berlin, Germany, Sep. 2019, pp. 90-93.
- I. Roth, N. Butler, M. P. J. Gaudreau, M. K. Kempkes, and R. E. Simpson, “Thyratron Replacement”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2512-2514.
- O. A. Kovalenko et al., “Ion Optics of the HESR Storage Ring at FAIR for Operation with Heavy Ions”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1117-1119.
- F. Furuta, K. Saito, and H. Yamaoka, “Different Materials Bonding by HIP Technology and the Reliability”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper TUP60, pp. 383-383.
- J.-L. Fernandez-Hernando, D. Angal-Kalinin, R. Losito, and V. Vlachoudis, “Initial Studies and a Review of Options for a Collimator System for the Linac4 Accelerator”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP037, pp. 2872-2874.
- F. Ghasemi, F. AbbasiDavani, S. Ahmadiannamini, M. Shafiee, M. L. Lamehi Rashti, and H. Shaker, “Construction of Disk-loaded Buncher for S-Band Low Energy TW Electron Linear Accelerator”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD063, pp. 2666-2668.
- J. Rahighi, “Proposal for a 3rd Generation National Iranian Synchrotron Light Source”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPEA023, pp. 2532-2534.
- H. H?ñhnel, U. Ratzinger, and R. Tiede, “Proposal of a Conventional Matching Section as an Alternative to the Existing HSI MEBT Superlens at GSI UNILAC”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP062, pp. 196-198.
- M. Gaowei et al., “High Current Performance of Alkali Antimonide Photocathode in LEReC DC Gun”, in Proc. 63rd Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'19), Berlin, Germany, Sep. 2019, pp. 61-64.
- A. Pisent, “Towards Commissioning of the IFMIF RFQ”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 698-703.
- D. G. Maxwell, Z. Q. He, and G. Shen, “FRIB Lattice-Model Service for Commissioning and Operation”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 90-92.
- A. Mizuno and H. Hanaki, “Semi-3D Beam-Tracking Code for Electron Injectors Using Bulk-to-Point Calculation Technique for Space Charge Fields”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 120-122.
- M. A. Palmer et al., “Electron Cloud at Low Emittance in CesrTA”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUYMH02, pp. 1251-1255.
Back to search