JaCoW Logo

Reference Search

Favourites


For Word

[n]	E. Levichev and M. Skamarokha, “Intrabeam scattering in SRF "SKIF" storage ring”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPS091, unpublished. 
[n]	B. L. Militsyn et al., “Operation of the CLARA Linear Accelerator with 2.5 Cell 10 Hz Photocathode Gun with Interchangeable Photocathodes”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 854-857. doi:10.18429/JACoW-LINAC2022-THPORI15
[n]	S. Sierra et al., “Status and Lesson Learned from Manufacturing of FPC Couplers for the XFEL Program”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 572-574. doi:10.18429/JACoW-LINAC2016-TUPLR048
[n]	C. Johnstone, M. Berz, K. Makino, S. R. Koscielniak, and P. Snopok, “Isochronous (CW) High Intensity Non-scaling FFAG Proton Drivers”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THOCN7, pp. 2116-2118. 
[n]	J. Vieira, G. Ascenção, and S. Luiz, “Specification of insertion devices for ORION project at SIRIUS”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPM060, unpublished. 
[n]	P. Knaus and J. Uythoven, “Transient Thermal Analysis of Intense Proton Beam Loss on a Kicker Magnet Conductor Plate”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP7B01, pp. 2252-2254. 
[n]	W. X. Zhou et al., “The Remote Control System for LAPECR1”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPEA022, pp. 3192-3194. 
[n]	J. Borer et al., “The LEP Beam Orbit Measurement System”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 778-783. 
[n]	A. Macridin, J. F. Amundson, and E. G. Stern, “Numerical simulations of transverse modes in Gaussian bunches with space charge”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 575-578. doi:10.18429/JACoW-IPAC2015-MOPMA017
[n]	N. Marais, P. S. Swart, L. Van den Heever, and C. C. A. de Villiers, “Virtualization and Deployment Management for the KAT-7 / MeerKAT Control and Monitoring System”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THCOBA06, pp. 1422-1425. 
[n]	M. A. Leitner et al., “Design Choices for the Integrated Beam Experiment (IBX)”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG040, pp. 1521-1523. 
[n]	M. S. Zisman, “R&D Toward a Neutrino Factory and Muon Collider”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THOBN1, pp. 2056-2060. 
[n]	M. Boege et al., “Recent Results on Energy Calibration at LEP”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP15H, pp. 409-411. 
[n]	D. Shu et al., “Mechanical Design and Development of Compact Linear Nanopositioning Flexure Stages with Centimeter-Level Travel Range and Nanometer-Level Resolution”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 124-127. doi:10.18429/JACoW-MEDSI2016-TUBA04
[n]	D.-J. Wang, H.-P. Chang, J.-R. Chen, J. P. Wang, and J. Wang, “Ground Vibration Measurement at NSRRC Site”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS074, pp. 3454-3456. 
[n]	S. Calatroni, E. Barbero-Soto, C. Benvenuti, L. Ferreira, and H. Neupert, “Progress Of Nb/Cu Technology with 1.5 GHz Cavities”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper WEO09, pp. 544-550. 
[n]	N. Wells and P. R. Hanley, “Inert Gas Ion Beams from a Duoplasmatron Ion Source”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 43-46. 
[n]	M. Apollonio et al., “Improved Emittance and Brightness for the MAX IV 3 GeV Storage Ring”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 288-291. doi:10.18429/JACoW-IPAC2022-MOPOPT023
[n]	C. W. O. Ostenfeld and M. Pedersen, “Wigglers at Danfysik”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWA001, pp. 2123-2125. 
[n]	T. Naito and T. M. Mitsuhashi, “Improvement of the Resolution of SR Interferometer at KEK-ATF Damping Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPE009, pp. 972-974. 
[n]	M. T. Lynch, “Control of Linear Accelerator Noise in the Los Alamos Free-Electron Laser (FEL)”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper MO3-10, pp. 59-61. 
[n]	F. B?©dker et al., “In-vacuum and FEL Undulators at Danfysik”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS117, pp. 3553-3555. 
[n]	H. O and G. Pecheur, “The 3.6 MW High Voltage Interface for the LEP Main Ring Klystrons”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1619-1622. 
[n]	Y. K. Semertzidis et al., “Electro-Optical Detection of Charged Particle Beams”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THBR4, pp. 490-491. 
[n]	S. Sierra et al., “Status of the Fundamental Power Coupler Production for the European XFEL Accelerator”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB094, pp. 1364-1366. 
[n]	E. G. Stern, R. Ainsworth, J. F. Amundson, and B. C. Brown, “Simulations of the Fermilab Recycler for Losses and Collimation”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 582-585. doi:10.18429/JACoW-IPAC2015-MOPMA019
[n]	F. Albert et al., “Tomographic Reconstruction of Electron Trajectories in a Laser-Plasma Accelerator Using Betatron X-Ray Radiation”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPAC21, pp. 111-113. 
[n]	M. Nordby and C. Perkins, “PEP-II Vacuum System Pressure Profile Modeling using EXCEL”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2515-2518. 
[n]	S. P. Kearney, D. Shu, and T. S. Toellner, “The Design of a Precision Mechanical Assembly for a Hard X-ray Polarizer”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 116-120. doi:10.18429/JACoW-MEDSI2016-TUBA01
[n]	D. Shuman, E. Henestroza, G. Ritchie, D. L. Vanecek, W. Waldron, and S. Yu, “A Pulsed Solenoid for Intense Ion Beam Transport”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper MPPT069, pp. 3798-3800. 
[n]	M. E. Inman et al., “Electropolishing of Niobium SRF Cavities in Eco-Friendly Aqueous Electrolytes Without Hydrofluoric Acid”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB101, pp. 390-393. 
[n]	C. W. O. Ostenfeld and M. Pedersen, “Cryogenic In-vacuum Undulator at Danfysik”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD006, pp. 3093-3095. 
[n]	M. Quispe et al., “Study, Design and Optimization Analysis of the ALBA LOREA Dipole Vacuum Chamber and Crotch Absorbers Based on Finite Element Analysis”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 191-193. doi:10.18429/JACoW-MEDSI2016-TUPE14

For LaTeX

Use Complete Form

For BibTeX

References

Back to search