Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] K. T. Pan et al., “Insertion Devices Control Development at SRRC”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P035, pp. 3539-3541.
[n] J. H. Wei et al., “Design of the Beam Diagnostics System for a New IR-FEL Facility at NSRL”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 181-183. doi:10.18429/JACoW-IPAC2016-MOPMB040
[n] F. F. Wu et al., “Preliminary Design and Calculation of Button BPM for the HALS Storage Ring”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4929-4931. doi:10.18429/JACoW-IPAC2018-THPML112
[n] P. Oddo, A. Rusek, and T. Russo, “Linearizing the Response of the NSRL Synchronous Recycling-Integrators”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAP044, pp. 2830-2832.
[n] R. H. A. Farias, A. P. B. Lima, L. Liu, and F. S. Oliveira, “Design and Status of Sirius Light Source RF Systems”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2391-2393. doi:10.18429/JACoW-IPAC2018-WEPMF011
[n] J. G. Kalnins, “The Use of Electric Multipole Lenses for Bending and Focusing Polar Molecules, with Application to the Design of a Rotational-State Separator”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAG029, pp. 2951-2953.
[n] T. L. Owens and O. A. Calvo, “Feedback Control of the Upgraded Linac at Fermilab”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1876-1879.
[n] H.-J. Tsai et al., “Closed Orbit Correction and Orbit Stabilization Control for TPS Storage Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC041, pp. 3068-3070.
[n] T. Y. Zhou et al., “Design of Bunch Length Measurement System at the IRFEL Using a Martin-Puplett Interferometer”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 178-180. doi:10.18429/JACoW-IPAC2016-MOPMB039
[n] K. Bongardt, H. Deitinghoff, M. Pabst, and G. Parisi, “Error Effects and Parameter Analysis for a HIDIF DTL”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP45G, pp. 1121-1123.
[n] J. M. Byrd, W. C. Barry, G. D. Stover, and G. Huang, “Beam Transfer Function Diagnostics for Broadband Multibunch Feedback Systems”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI028, pp. 2064-2066.
[n] G. Rangarajan, A. Dragt, and F. Neri, “Generalized Emittance Invariants”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1280-1283.
[n] U. Pudasaini, M. J. Kelley, G. V. Eremeev, and C. E. Reece, “Experimental Study of Nucleation for Nb3Sn Diffusion Coatings on Niobium SRF Cavities”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 740-743. doi:10.18429/JACoW-LINAC2016-THOP01
[n] H. Witte, J. S. Berg, and M. L. Lopes, “Progress on the Dipole Magnet for a Rapid Cycling Synchrotron”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1322-1324. doi:10.18429/JACoW-IPAC2014-TUPRO115
[n] R. Broomfield, M. Heiniger, T. Korhonen, and T. Pal, “Database Applications for Control System Hardware Management”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP530, pp. XX-XX.
[n] R. H. A. Farias, D. A. Nascimento, C. Pardine, and P. F. Tavares, “Bench Characterization of a Prototype of a 3rd Harmonic Cavity for the LNLS Electron Storage Ring”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP085, pp. 748-750.
[n] N. Yamamoto, M. Hosaka, A. Mano, T. Takano, Y. Takashima, and M. Katoh, “Design Study of Pulsed Multipole Injection for Aichi SR”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1962-1964. doi:10.18429/JACoW-IPAC2014-WEPRO011
[n] H.-P. Chang et al., “Design Considerations of the TPS Linac-to-booster Transfer Line”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC005, pp. 1989-1991.
[n] W. F. Braeutigam, S. A. Martin, G. Schug, E. N. Zaplatine, P. F. Meads, and Y. V. Senichev, “Design Considerations for a Superconducting Linac as an Option for the ESS”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA69, pp. 3549-3551.
[n] T.-H. Kim, Y. Makita, S. Nakamura, T. Nakanishi, Y. Pu, and H. Tanaka, “Design and a Beam Test of an LEBT of a CW Microtron”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPDO014, pp. 2352-2354.
[n] C. R. Kerns, “Radiation Hardened Proton Meter for Fermilab External Beam Lines”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1104-1109.
[n] P. Peiffer et al., “Reduction of Dynamic Field Errors in Superconductive Undulators”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD016, pp. 3120-3122.
[n] H. C. Chao, P. Brunelle, A. Nadji, L. S. Nadolski, and R. Nagaoka, “Study of Lower Horizontal Emittance Optics in the Present Soleil Storage Ring”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 827-829. doi:10.18429/JACoW-IPAC2016-MOPOW050
[n] Q. Wang, Q. Luo, B. G. Sun, and F. F. Wu, “A Study on the Influence of Bunch Longitudinal Distribution on the Cavity Bunch Length Measurement”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 97-100. doi:10.18429/JACoW-IBIC2018-MOPB10
[n] N. V. Lazarev and S. Skachkov, “Tipless Permanent Magnet Quadrupole Lenses”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S7-2, pp. 380-383.
For LaTeX
Use Complete Form
For BibTeX
References
- K. T. Pan et al., “Insertion Devices Control Development at SRRC”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P035, pp. 3539-3541.
- J. H. Wei et al., “Design of the Beam Diagnostics System for a New IR-FEL Facility at NSRL”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 181-183.
- F. F. Wu et al., “Preliminary Design and Calculation of Button BPM for the HALS Storage Ring”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4929-4931.
- P. Oddo, A. Rusek, and T. Russo, “Linearizing the Response of the NSRL Synchronous Recycling-Integrators”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAP044, pp. 2830-2832.
- R. H. A. Farias, A. P. B. Lima, L. Liu, and F. S. Oliveira, “Design and Status of Sirius Light Source RF Systems”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2391-2393.
- J. G. Kalnins, “The Use of Electric Multipole Lenses for Bending and Focusing Polar Molecules, with Application to the Design of a Rotational-State Separator”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPAG029, pp. 2951-2953.
- T. L. Owens and O. A. Calvo, “Feedback Control of the Upgraded Linac at Fermilab”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1876-1879.
- H.-J. Tsai et al., “Closed Orbit Correction and Orbit Stabilization Control for TPS Storage Ring”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC041, pp. 3068-3070.
- T. Y. Zhou et al., “Design of Bunch Length Measurement System at the IRFEL Using a Martin-Puplett Interferometer”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 178-180.
- K. Bongardt, H. Deitinghoff, M. Pabst, and G. Parisi, “Error Effects and Parameter Analysis for a HIDIF DTL”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP45G, pp. 1121-1123.
- J. M. Byrd, W. C. Barry, G. D. Stover, and G. Huang, “Beam Transfer Function Diagnostics for Broadband Multibunch Feedback Systems”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI028, pp. 2064-2066.
- G. Rangarajan, A. Dragt, and F. Neri, “Generalized Emittance Invariants”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1280-1283.
- U. Pudasaini, M. J. Kelley, G. V. Eremeev, and C. E. Reece, “Experimental Study of Nucleation for Nb3Sn Diffusion Coatings on Niobium SRF Cavities”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 740-743.
- H. Witte, J. S. Berg, and M. L. Lopes, “Progress on the Dipole Magnet for a Rapid Cycling Synchrotron”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1322-1324.
- R. Broomfield, M. Heiniger, T. Korhonen, and T. Pal, “Database Applications for Control System Hardware Management”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP530, pp. XX-XX.
- R. H. A. Farias, D. A. Nascimento, C. Pardine, and P. F. Tavares, “Bench Characterization of a Prototype of a 3rd Harmonic Cavity for the LNLS Electron Storage Ring”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPP085, pp. 748-750.
- N. Yamamoto, M. Hosaka, A. Mano, T. Takano, Y. Takashima, and M. Katoh, “Design Study of Pulsed Multipole Injection for Aichi SR”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1962-1964.
- H.-P. Chang et al., “Design Considerations of the TPS Linac-to-booster Transfer Line”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC005, pp. 1989-1991.
- W. F. Braeutigam, S. A. Martin, G. Schug, E. N. Zaplatine, P. F. Meads, and Y. V. Senichev, “Design Considerations for a Superconducting Linac as an Option for the ESS”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA69, pp. 3549-3551.
- T.-H. Kim, Y. Makita, S. Nakamura, T. Nakanishi, Y. Pu, and H. Tanaka, “Design and a Beam Test of an LEBT of a CW Microtron”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPDO014, pp. 2352-2354.
- C. R. Kerns, “Radiation Hardened Proton Meter for Fermilab External Beam Lines”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1104-1109.
- P. Peiffer et al., “Reduction of Dynamic Field Errors in Superconductive Undulators”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD016, pp. 3120-3122.
- H. C. Chao, P. Brunelle, A. Nadji, L. S. Nadolski, and R. Nagaoka, “Study of Lower Horizontal Emittance Optics in the Present Soleil Storage Ring”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 827-829.
- Q. Wang, Q. Luo, B. G. Sun, and F. F. Wu, “A Study on the Influence of Bunch Longitudinal Distribution on the Cavity Bunch Length Measurement”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 97-100.
- N. V. Lazarev and S. Skachkov, “Tipless Permanent Magnet Quadrupole Lenses”, in Proc. 1979 Linear Accelerator Conf. (LINAC'79), Montauk, NY, USA, Sep. 1979, paper S7-2, pp. 380-383.
Back to search