Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. A. Westenskow et al., “Relativistic Klystrons for High-Gradient Accelerators”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO452, pp. 192-194.
[n] R. L. Holtzapple and D. Rice, “Single Bunch Longitudinal Measurements of the Cornell Electron-Positron Storage Ring with the Superconducting RF Cavities”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH118, pp. 3508-3510.
[n] J. Glatz and L. Groening, “Beam Acceleration in the Single-Gap Resonator Section of the Unilac using Alternating Phase Focusing”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE119, pp. 897-899.
[n] J. Chavanne, P. Elleaume, and P. Van Vaerenbergh, “Development of Quasiperiodic Undulators at the ESRF”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP07F, pp. 2213-2215.
[n] F.-J. Boergermann, “Improvements in Production of Magnets and Pole Pieces for Undulators”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1415-1417. doi:10.18429/JACoW-IPAC2017-TUPAB041
[n] A. Perry, A. Barcikowski, G. L. Cherry, C. Dickerson, B. Mustapha, and P. N. Ostroumov, “EBIS Charge Breeder at ANL and its Integration into ATLAS”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3969-3972. doi:10.18429/JACoW-IPAC2015-THPF108
[n] H. Ishimoto, M. E. Price, and R. Yamada, “Prototype Test of Energy Doubler/Saver Bending Magnet”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1309-1312.
[n] S. De Santis et al., “Injection/Extraction Kicker for the ALS-U Project”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1977-1979. doi:10.18429/JACoW-IPAC2014-WEPRO016
[n] T. Holubek et al., “A Superconducting Switch for Insertion Devices with Variable Period Length”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC160, pp. 3266-3268.
[n] I. N. Okunev et al., “Magnetic Measurement of the NSLS-II Booster Dipole with Combine Functions”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPME032, pp. 3579-3581.
[n] T. K. Khoe, J. J. Livingood, and W. J. Ramler, “Proposed Midwest Tandem Cyclotron (MTC)”, in Proc. Cyclotrons'69, Oxford, UK, Sep. 1969, paper CYC69A04, pp. XX-XX.
[n] I. P. S. Martin, M. G. Abbott, M. Apollonio, D. Hickin, and R. Bartolini, “Operating the Diamond Storage Ring with Reduced Vertical Emittance”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA071, pp. 249-251.
[n] M. Cavenago et al., “Experiments with Electron Cloud and Sources”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS050, pp. 2490-2492.
[n] F. Hug et al., “Increasing the Stability of the Electron Beam of the S-DALINAC”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI007, pp. 3303-3305.
[n] A. V. Samoshin and S. M. Polozov, “3D Beam Dynamic Simulation in Heavy Ion Superconducting Drift Tube Linac”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS038, pp. 685-687.
[n] J. Culver, K. Antes, F. R. Huson, A. Larsson, C. R. Meitzler, and L. Xiu, “Progress in H- ion Source Development at TAC”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2008-2011.
[n] P. Sanchez et al., “The ALBA RF Amplifier System Based on Inductive Output Tubes (IOT)”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPD033, pp. 523-525.
[n] R. Modic, P. Della Faille, P. Mekuc, and D. Vandeplassche, “MYRRHA DAQ Development”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2645-2646. doi:10.18429/JACoW-IPAC2019-WEPGW074
[n] M. Espig et al., “Development of Pulsed Laser Systems and Cathode-performance Studies for the S-DALINAC Polarized Injector”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD054, pp. 2642-2644.
[n] J. Chen et al., “Functionality Enhancement of the Multiplexing BPM System in the Storage of SRRC”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper PM05, pp. XX-XX.
[n] E. J. Wall?®n, “Insertion Devices for the MAX IV 3 GeV Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD038, pp. 3171-3173.
[n] R. P. Walker, “Overview of Synchrotron Radiation and Free Electron Laser Projects”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUZ04A, pp. 133-137.
For LaTeX
Use Complete Form
For BibTeX
References
- G. A. Westenskow et al., “Relativistic Klystrons for High-Gradient Accelerators”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper MO452, pp. 192-194.
- R. L. Holtzapple and D. Rice, “Single Bunch Longitudinal Measurements of the Cornell Electron-Positron Storage Ring with the Superconducting RF Cavities”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH118, pp. 3508-3510.
- J. Glatz and L. Groening, “Beam Acceleration in the Single-Gap Resonator Section of the Unilac using Alternating Phase Focusing”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPLE119, pp. 897-899.
- J. Chavanne, P. Elleaume, and P. Van Vaerenbergh, “Development of Quasiperiodic Undulators at the ESRF”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP07F, pp. 2213-2215.
- F.-J. Boergermann, “Improvements in Production of Magnets and Pole Pieces for Undulators”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1415-1417.
- A. Perry, A. Barcikowski, G. L. Cherry, C. Dickerson, B. Mustapha, and P. N. Ostroumov, “EBIS Charge Breeder at ANL and its Integration into ATLAS”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3969-3972.
- H. Ishimoto, M. E. Price, and R. Yamada, “Prototype Test of Energy Doubler/Saver Bending Magnet”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1309-1312.
- S. De Santis et al., “Injection/Extraction Kicker for the ALS-U Project”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1977-1979.
- T. Holubek et al., “A Superconducting Switch for Insertion Devices with Variable Period Length”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC160, pp. 3266-3268.
- I. N. Okunev et al., “Magnetic Measurement of the NSLS-II Booster Dipole with Combine Functions”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPME032, pp. 3579-3581.
- T. K. Khoe, J. J. Livingood, and W. J. Ramler, “Proposed Midwest Tandem Cyclotron (MTC)”, in Proc. 5th Int. Cyclotron Conf. (Cyclotrons'69), Oxford, UK, Sep. 1969, paper CYC69A04, pp. XX-XX.
- I. P. S. Martin, M. G. Abbott, M. Apollonio, D. Hickin, and R. Bartolini, “Operating the Diamond Storage Ring with Reduced Vertical Emittance”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPEA071, pp. 249-251.
- M. Cavenago et al., “Experiments with Electron Cloud and Sources”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS050, pp. 2490-2492.
- F. Hug et al., “Increasing the Stability of the Electron Beam of the S-DALINAC”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI007, pp. 3303-3305.
- A. V. Samoshin and S. M. Polozov, “3D Beam Dynamic Simulation in Heavy Ion Superconducting Drift Tube Linac”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPS038, pp. 685-687.
- J. Culver, K. Antes, F. R. Huson, A. Larsson, C. R. Meitzler, and L. Xiu, “Progress in H- ion Source Development at TAC”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2008-2011.
- P. Sanchez et al., “The ALBA RF Amplifier System Based on Inductive Output Tubes (IOT)”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPD033, pp. 523-525.
- R. Modic, P. Della Faille, P. Mekuc, and D. Vandeplassche, “MYRRHA DAQ Development”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2645-2646.
- M. Espig et al., “Development of Pulsed Laser Systems and Cathode-performance Studies for the S-DALINAC Polarized Injector”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD054, pp. 2642-2644.
- J. Chen et al., “Functionality Enhancement of the Multiplexing BPM System in the Storage of SRRC”, in Proc. 5th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'01), Grenoble, France, May 2001, paper PM05, pp. XX-XX.
- E. J. Wall?®n, “Insertion Devices for the MAX IV 3 GeV Ring”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPD038, pp. 3171-3173.
- R. P. Walker, “Overview of Synchrotron Radiation and Free Electron Laser Projects”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUZ04A, pp. 133-137.
Back to search