JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	R. Ferreira, S. Blanchard, P. Gomes, G. Pigny, and T. R. Fernandes, “LTE/3G Based Wireless Communications for Remote Control and Monitoring of PLC-Controlled Vacuum Mobile Devices”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 64-70. doi:10.18429/JACoW-ICALEPCS2017-MOCPL04
[n]	W. Guo, S. L. Kramer, F. J. Willeke, X. Yang, and L. Yu, “A Lattice Correction Approach through Betatron Phase Advance”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 62-64. doi:10.18429/JACoW-IPAC2016-MOOCB02
[n]	S. Hahn, “Recent progress in high temperature superconductor magnet technology”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEZD1, unpublished. 
[n]	B. Bing, T. M. Huang, Q. Ma, F. Meng, W. M. Pan, and K. X. Gu, “Design of Fundamental Power Coupler for High Intensity Heavy-ion Accelerator”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 183-185. doi:10.18429/JACoW-SRF2017-MOPB054
[n]	J. V. Conway, Y. Li, and M. A. Palmer, “The Conceptual Design of a Vacuum System for the ILC Damping Rings Incorporating Electron Cloud Mitigation Techniques”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR062, pp. 1960-1962. 
[n]	T. Linnecar and W. Scandale, “Continuous Tune Measurements Using the Schottky Detector”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2185-2188. 
[n]	R. Maier, S. Martin, D. Prasuhn, O. W. B. Schult, and I. Zychor, “Beam Parameters at the Internal Target Positions for Experiments in COSY-Juelich”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP104G, pp. 1429-1431. 
[n]	T. A. Miller, S. Bellavia, I. Ben-Zvi, J. M. Fite, and D. M. Gassner, “Instrumentation Designs for Beam Distribution Measurements in the ERL Beam Dump at BNL”, in Proc. ERL'13, Novosibirsk, Russia, Sep. 2013, paper PS14, pp. 108-111. 
[n]	S. Blanchard et al., “Vacuum Pumping Group Controls Based on PLC”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WPO030, pp. 105-107. 
[n]	A. K. Mitra and P. J. Tallerico, “Spark-Gap Crowbar for High-Voltage Power Supply”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2862-2865. 
[n]	E. Carrone, A. Tsirou, and P. G. Verdini, “A Discrete Event System the CMS Tracker Interlocks”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper O4_012. 
[n]	T. Schultheiss, J. Rathke, V. Ravindranath, J. Rose, and S. K. Sharma, “CESR-type SRF Cavity - Meeting the ASME Pressure Vessel Criteria by Analysis”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP271, pp. 1328-1330. 
[n]	B. Puccio, A. Casta??eda, M. Kwiatkowski, I. Romera, and B. Todd, “The CERN Beam Interlock System: Principle and Operational Experience”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB073, pp. 2866-2868. 
[n]	D. M. Gassner, C. Liu, R. J. Michnoff, T. A. Miller, M. G. Minty, and M. Wilinski, “Status of the BNL ERL Instrumentation”, in Proc. ERL'13, Novosibirsk, Russia, Sep. 2013, paper PS11, pp. 100-105. 
[n]	M. T. Heron, K. A. R. Baker, S. Lay, and P. D. Woods, “Use of Industrial Control Solutions in the Diamond Project”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP548, pp. XX-XX. 
[n]	Y. Yonemura et al., “Status of Center for Accelerator and Beam Applied Science of Kyushu University”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP070, pp. 3521-3523. 
[n]	K. Nakamura et al., “Experimental Study of Self-Trapping in Capillary Discharge Guided Laser Wakefield Acceleration”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP076, pp. 2973-2975. 
[n]	K. Aulenbacher, J. Diefenbach, R. G. Heine, and F. Schlander, “Status of the MESA Accelerator”, in Proc. ERL'13, Novosibirsk, Russia, Sep. 2013, paper PLT01, pp. 1-5. 
[n]	Y. Takashima et al., “Present Status of Accelerators in Aichi Synchrotron Radiation Center”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2877-2879. doi:10.18429/JACoW-IPAC2016-WEPOW023
[n]	K. X. Gu, X. Chen, T. M. Huang, Q. Ma, and W. M. Pan, “Design and Simulation of High Power Input Coupler for C-ADS Linac 5-Cell Elliptical Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB087, pp. 1343-1345. 
[n]	T. Bahlo, M. Arnold, J. Pforr, N. Pietralla, and F. Schlie?ƒmann, “Time-of-Flight Measurements and Analysis of the Longitudinal Dispersion at the S-DALINAC”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 57-60. doi:10.18429/JACoW-IBIC2017-MOPCC08
[n]	B. T. Loseth, M. Berz, and P. Snopok, “Ionization Cooling Channels in COSY Infinity”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2652-2654. doi:10.18429/JACoW-IPAC2015-WEPWA064
[n]	X. Chen et al., “Considerations for a Cavity-Based Position-Sensitive Heavy Ion Detector for the CR at FAIR”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3477-3479. doi:10.18429/JACoW-IPAC2014-THPME101
[n]	F. Hug, M. Arnold, L. E. Juergensen, T. Kuerzeder, N. Pietralla, and M. Schilling, “Beam Dynamics Calculations and Magnet Design for Future Measurements of Transverse Beam Break-Up at the S-DALINAC”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP135, pp. 729-732. 
[n]	J. Zhuang, Y. P. Chu, D. P. Jin, and J. J. Li, “The Performance Test of F3RP61 and Its Applications in CSNS Experimental Control System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPKN027, pp. 763-766. 
[n]	M. Apollonio et al., “Long-term Stability of the Diamond Light Source Storage Ring”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 319-321. doi:10.18429/JACoW-IPAC2014-MOPRO099
[n]	R. Grewe et al., “Superconducting RF Cavity Materials Research at the S-DALINAC”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 74-76. doi:10.18429/JACoW-SRF2019-MOP022
[n]	M. Schuett, U. Ratzinger, and M. Syha, “First RF Measurements of the 325 MHz Ladder RFQ”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 826-829. doi:10.18429/JACoW-LINAC2018-THPO060
[n]	W. A. Reass, J. D. Doss, M. G. Fresquez, D. A. Miera, J. S. Mirabal, and P. J. Tallerico, “A Proof-of-Principle Power Convertor for the Spallation Neutron Source RF System”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THAL4, pp. 426-428. 
[n]	F. Hug, T. Kuerzeder, and N. Pietralla, “Upcoming Measurements of Transverse Beam Break-Up at the Superconducting Recirculating Electron Accelerator S-DALINAC”, in Proc. ERL'13, Novosibirsk, Russia, Sep. 2013, paper PS09, pp. 97-99. 
[n]	S. Nakamura et al., “Present Status of the 1 GeV Synchrotron Radiation Source at SORTEC”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 472-475. 
[n]	L. K. Mestha, C. M. Kwan, R. C. Webber, and K. S. Yeung, “A General Control Model for Designing Beam Control Feedback Loops”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1076-1079. 
[n]	S. Jackson, J-L. Nougaret, and M. Peryt, “Use of WML Technologies for Data-driven Accelerator Controls”, in Proc. ICALEPCS'05, Geneva, Switzerland, Oct. 2005, paper P3_094. 
[n]	K. Koyama, M. Yoshida, Z. Chen, H. Okamoto, and M. Uesaka, “Laser-Driven Dielectric Nano-Beam Accelerator for Radiation Biology Researches”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 873-875. doi:10.18429/JACoW-LINAC2016-THPLR014
[n]	G. Yocky, Y. Cai, F.-J. Decker, Y. Nosochkov, P. Raimondi, and U. Wienands, “Optimization of Chromatic Optics Near the Half Integer in PEP-II”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS070, pp. 1814-1816. 
[n]	C. M. Bhat, “A New Beam Injection Scheme for the Fermilab Booster”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3976-3978. doi:10.18429/JACoW-IPAC2015-THPF112
[n]	Z. Shi-Cai, Z. Xiao-Guang, and Y. Hu-Zhi, “Microwave Tuning of Disk-Loaded Waveguide for BEPC”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 802-804. 
[n]	M. Y. Huang, D. P. Jin, L. Shen, S. Wang, S. Y. Xu, and P. Zhu, “Timing Adjustment of Eight Kickers and a Method to Calibrate the Kicker Current Curves During the Beam Commissioning for CSNS”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 312-314. doi:10.18429/JACoW-HB2018-WEP2PO023
[n]	C. M. York, C. Ward, E. Tagliaferri, D. Hansen, J. Ewins, and A. Berick, “Neutron Beam from the UCLA Spiral - Ridge Cyclotron”, in Proc. Cyclotrons'63, Geneva, Switzerland, Apr. 1963, paper CYC63D03, pp. XX-XX. 
[n]	C. G. R. Geddes et al., “Colliding Pulse Injection Control in a Laser-Plasma Accelerator”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP123, pp. 325-327. 
[n]	M. Schuett, U. Ratzinger, and M. Syha, “RF Measurements and Tuning of the 325 MHz Ladder-RFQ”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 925-927. doi:10.18429/JACoW-IPAC2019-MOPTS033
[n]	S. Koda, Y. Iwasaki, T. Kaneyasu, and Y. Takabayashi, “Progress and Status of Synchrotron Radiation Facility SAGA Light Source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEA040, pp. 2579-2581. 
[n]	Y. J. Yuan et al., “Present Status of HIRFL Complex in Lanzhou”, in Proc. HIAT'18, Lanzhou, China, Oct. 2018, pp. 18-22. doi:10.18429/JACoW-HIAT2018-MOZBA01
[n]	Z. S. Li et al., “Recent Progress of a CW 4-rod RFQ for the SSC-LINAC”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 814-817. doi:10.18429/JACoW-LINAC2018-THPO054
[n]	J. M. Martin Ruiz et al., “Progresses and design development for the CERN ISOLDE beam dumps exchange”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3838-3841. doi:10.18429/JACoW-IPAC2023-WEPM115
[n]	T. Kuerzeder, M. Arnold, L. E. Juergensen, J. Pforr, N. Pietralla, and F. Hug, “Measurements of the Beam Break-Up Threshold Current at the Recirculating Electron Accelerator S-DALINAC”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 751-753. doi:10.18429/JACoW-LINAC2016-THOP04
[n]	A. Krusche, H. Riege, and G. C. Schneider, “Automatic Procedures in the CPS Multiturn Shaving Ejection”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3340-3343. 
[n]	T. Kaneyasu, Y. Iwasaki, S. Koda, and Y. Takabayashi, “Observation and Correction of Effects of Variably Polarized Undulator on Electron Beam at SAGA-LS”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD031, pp. 3162-3164. 
[n]	D. Schulte et al., “CLIC Energy Scans”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE022, pp. 3395-3397. 
[n]	G. Rumolo, J. B. Jeanneret, and D. Schulte, “Vacuum Specifications for the CLIC Main Linac”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE024, pp. 3401-3403. 
[n]	V. L. Serov, “Isotope Production for Medical and Technical Use at Moscow Meson Factory Linac”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper MOP61, pp. 213-215. 
[n]	T. Hosokai et al., “Application of Fast Imploding Capillary Discharge for Laser Wakefield Acceleration”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA132, pp. 3690-3692. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search